[PATCH 4/8] mfd: Disable more pulls on WM8994

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

Disable more pulls by default on WM8994 for a small current saving. Since
some designs do leave SPKMODE floating provide platform data to allow that
to be left enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm8994-core.c        |   11 ++++++++---
 include/linux/mfd/wm8994/pdata.h |    6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index a6846b0..c8956f2 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -373,6 +373,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
 	const char *devname;
 	int ret, i;
+	int pulls = 0;
 
 	dev_set_drvdata(wm8994->dev, wm8994);
 
@@ -515,12 +516,16 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		}
 
 		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
+
+		if (pdata->spkmode_pu)
+			pulls |= WM8994_SPKMODE_PU;
 	}
 
-	/* Disable LDO pulldowns while the device is active */
+	/* Disable unneeded pulls */
 	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
-			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
-			0);
+			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
+			WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
+			pulls);
 
 	/* In some system designs where the regulators are not in use,
 	 * we can achieve a small reduction in leakage currents by
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index ea32f30..54e2fef 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -174,6 +174,12 @@ struct wm8994_pdata {
 	 * consumption will rise.
 	 */
 	bool ldo_ena_always_driven;
+
+	/*
+	 * SPKMODE must be pulled internally by the device on this
+	 * system.
+	 */
+	bool spkmode_pu;
 };
 
 #endif
-- 
1.7.7.3