From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
Tony Lindgren <tony@atomide.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dmitry Torokhov <dtor@mail.ru>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org
Subject: [RFC 1/7] MFD: twl-core: Detach twl6040 from the pmic mfd driver
Date: Thu, 2 Feb 2012 14:16:53 +0200 [thread overview]
Message-ID: <1328185019-29575-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1328185019-29575-1-git-send-email-peter.ujfalusi@ti.com>
On OMAP4 platform audio has separate IC, it is no longer part
of the pmic chip.
Prevent twl-core to claim the 0x4b address, which belongs to
the twl6040 audio IC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/mfd/twl-core.c | 58 +++++++++++++++++++++++++++--------------------
1 files changed, 33 insertions(+), 25 deletions(-)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index e04e04d..ac6fdd93 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -115,8 +115,8 @@
#define twl_has_watchdog() false
#endif
-#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
- defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || \
+ defined(CONFIG_MFD_TWL4030_AUDIO_MODULE)
#define twl_has_codec() true
#else
#define twl_has_codec() false
@@ -146,6 +146,7 @@
#define SUB_CHIP_ID1 1
#define SUB_CHIP_ID2 2
#define SUB_CHIP_ID3 3
+#define SUB_CHIP_ID_INVAL 0xff
#define TWL_MODULE_LAST TWL4030_MODULE_LAST
@@ -315,7 +316,7 @@ static struct twl_mapping twl6030_map[] = {
* so they continue to match the order in this table.
*/
{ SUB_CHIP_ID1, TWL6030_BASEADD_USB },
- { SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO },
+ { SUB_CHIP_ID_INVAL, TWL6030_BASEADD_AUDIO },
{ SUB_CHIP_ID2, TWL6030_BASEADD_DIEID },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID1, TWL6030_BASEADD_PIH },
@@ -377,6 +378,11 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
return -EPERM;
}
sid = twl_map[mod_no].sid;
+ if (unlikely(sid == SUB_CHIP_ID_INVAL)) {
+ pr_err("%s: module %d is not part of the pmic\n",
+ DRIVER_NAME, mod_no);
+ return -EINVAL;
+ }
twl = &twl_modules[sid];
mutex_lock(&twl->xfer_lock);
@@ -434,6 +440,11 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
return -EPERM;
}
sid = twl_map[mod_no].sid;
+ if (unlikely(sid == SUB_CHIP_ID_INVAL)) {
+ pr_err("%s: module %d is not part of the pmic\n",
+ DRIVER_NAME, mod_no);
+ return -EINVAL;
+ }
twl = &twl_modules[sid];
mutex_lock(&twl->xfer_lock);
@@ -834,15 +845,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
return PTR_ERR(child);
}
- if (twl_has_codec() && pdata->audio && twl_class_is_6030()) {
- sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
- child = add_child(sub_chip_id, "twl6040",
- pdata->audio, sizeof(*pdata->audio),
- false, 0, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
/* twl4030 regulators */
if (twl_has_regulator() && twl_class_is_4030()) {
child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1,
@@ -1163,18 +1165,21 @@ int twl6030_exit_irq(void);
static int twl_remove(struct i2c_client *client)
{
- unsigned i;
+ unsigned i, num_slaves;
int status;
- if (twl_class_is_4030())
+ if (twl_class_is_4030()) {
status = twl4030_exit_irq();
- else
+ num_slaves = TWL_NUM_SLAVES;
+ } else {
status = twl6030_exit_irq();
+ num_slaves = TWL_NUM_SLAVES - 1;
+ }
if (status < 0)
return status;
- for (i = 0; i < TWL_NUM_SLAVES; i++) {
+ for (i = 0; i < num_slaves; i++) {
struct twl_client *twl = &twl_modules[i];
if (twl->client && twl->client != client)
@@ -1190,7 +1195,7 @@ static int __devinit
twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
int status;
- unsigned i;
+ unsigned i, num_slaves;
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
u8 temp;
@@ -1244,7 +1249,17 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
return -EBUSY;
}
- for (i = 0; i < TWL_NUM_SLAVES; i++) {
+ if ((id->driver_data) & TWL6030_CLASS) {
+ twl_id = TWL6030_CLASS_ID;
+ twl_map = &twl6030_map[0];
+ num_slaves = TWL_NUM_SLAVES - 1;
+ } else {
+ twl_id = TWL4030_CLASS_ID;
+ twl_map = &twl4030_map[0];
+ num_slaves = TWL_NUM_SLAVES;
+ }
+
+ for (i = 0; i < num_slaves; i++) {
struct twl_client *twl = &twl_modules[i];
twl->address = client->addr + i;
@@ -1263,13 +1278,6 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
mutex_init(&twl->xfer_lock);
}
inuse = true;
- if ((id->driver_data) & TWL6030_CLASS) {
- twl_id = TWL6030_CLASS_ID;
- twl_map = &twl6030_map[0];
- } else {
- twl_id = TWL4030_CLASS_ID;
- twl_map = &twl4030_map[0];
- }
/* setup clock framework */
clocks_init(&client->dev, pdata->clock);
--
1.7.8.4
next prev parent reply other threads:[~2012-02-02 12:17 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 12:16 [RFC 0/7] MFD: twl6040: Conversion to i2c driver Peter Ujfalusi
2012-02-02 12:16 ` Peter Ujfalusi [this message]
2012-02-02 12:16 ` [RFC 2/7] MFD: twl6040: Convert to i2c driver, and separate it from twl core Peter Ujfalusi
2012-02-02 12:48 ` Mark Brown
2012-02-02 13:01 ` Peter Ujfalusi
2012-02-02 13:27 ` Mark Brown
2012-02-02 12:16 ` [RFC 3/7] ASoC: twl6040: Remove dependency on twl4030 from Kconfig Peter Ujfalusi
2012-02-02 12:42 ` Mark Brown
2012-02-02 12:16 ` [RFC 4/7] OMAP: 4430sdp: Correct fixed regulator device ID Peter Ujfalusi
2012-02-02 12:38 ` Mark Brown
2012-02-02 12:16 ` [RFC 5/7] OMAP: sdp4430: Add fixed regulator for twl6040 needs Peter Ujfalusi
2012-02-02 12:40 ` Mark Brown
2012-02-02 13:03 ` Peter Ujfalusi
2012-02-02 12:16 ` [RFC 6/7] OMAP: omap4panda: " Peter Ujfalusi
2012-02-02 12:41 ` Mark Brown
2012-02-02 12:16 ` [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies Peter Ujfalusi
2012-02-02 12:52 ` Mark Brown
2012-02-02 13:18 ` Peter Ujfalusi
2012-02-02 13:32 ` Mark Brown
2012-02-02 13:59 ` Peter Ujfalusi
2012-02-02 14:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328185019-29575-2-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dtor@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=misael.lopez@ti.com \
--cc=sameo@linux.intel.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®