From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: alan@linux.intel.com, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org, jirislaby@gmail.com,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH 27/68] TTY: amiserial, use only one copy of async flags
Date: Mon, 5 Mar 2012 14:52:14 +0100 [thread overview]
Message-ID: <1330955575-26641-28-git-send-email-jslaby@suse.cz> (raw)
In-Reply-To: <1330955575-26641-1-git-send-email-jslaby@suse.cz>
Huh, why would one want to store two copies of them? Get rid of the
one from async_struct. That structure is going away as a whole soon.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/tty/amiserial.c | 82 ++++++++++++++++++++++-------------------------
1 file changed, 38 insertions(+), 44 deletions(-)
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index d5fac86..8556ca0 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -45,7 +45,7 @@
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
+ tty->name, (info->state->flags), serial_driver->refcount,info->count,tty->count,s)
#else
#define DBG_CNT(s)
#endif
@@ -297,7 +297,7 @@ static void receive_chars(struct async_struct *info)
printk("handling break....");
#endif
flag = TTY_BREAK;
- if (info->flags & ASYNC_SAK)
+ if (info->state->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & UART_LSR_PE)
flag = TTY_PARITY;
@@ -378,7 +378,7 @@ static void check_modem_status(struct async_struct *info)
if (dstatus & SER_DCD) {
icount->dcd++;
#ifdef CONFIG_HARD_PPS
- if ((info->flags & ASYNC_HARDPPS_CD) &&
+ if ((info->state->flags & ASYNC_HARDPPS_CD) &&
!(status & SER_DCD))
hardpps();
#endif
@@ -388,7 +388,7 @@ static void check_modem_status(struct async_struct *info)
wake_up_interruptible(&info->delta_msr_wait);
}
- if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
+ if ((info->state->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttyS%d CD now %s...", info->line,
(!(status & SER_DCD)) ? "on" : "off");
@@ -403,7 +403,7 @@ static void check_modem_status(struct async_struct *info)
tty_hangup(info->tty);
}
}
- if (info->flags & ASYNC_CTS_FLOW) {
+ if (info->state->flags & ASYNC_CTS_FLOW) {
if (info->tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
@@ -516,7 +516,7 @@ static int startup(struct async_struct * info)
local_irq_save(flags);
- if (info->flags & ASYNC_INITIALIZED) {
+ if (info->state->flags & ASYNC_INITIALIZED) {
free_page(page);
goto errout;
}
@@ -569,13 +569,13 @@ static int startup(struct async_struct * info)
* Set up the tty->alt_speed kludge
*/
if (info->tty) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
info->tty->alt_speed = 460800;
}
@@ -584,7 +584,7 @@ static int startup(struct async_struct * info)
*/
change_speed(info, NULL);
- info->flags |= ASYNC_INITIALIZED;
+ info->state->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
@@ -602,7 +602,7 @@ static void shutdown(struct async_struct * info)
unsigned long flags;
struct serial_state *state;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->state->flags & ASYNC_INITIALIZED))
return;
state = info->state;
@@ -646,7 +646,7 @@ static void shutdown(struct async_struct * info)
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->state->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
@@ -691,7 +691,7 @@ static void change_speed(struct async_struct *info,
baud = 9600; /* B0 transition handled in rs_set_termios */
baud_base = info->state->baud_base;
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
quot = info->state->custom_divisor;
else {
if (baud == 134)
@@ -709,7 +709,7 @@ static void change_speed(struct async_struct *info,
if (!baud)
baud = 9600;
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ ((info->state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
quot = info->state->custom_divisor;
else {
if (baud == 134)
@@ -728,17 +728,17 @@ static void change_speed(struct async_struct *info,
/* CTS flow control flag and modem status interrupts */
info->IER &= ~UART_IER_MSI;
- if (info->flags & ASYNC_HARDPPS_CD)
+ if (info->state->flags & ASYNC_HARDPPS_CD)
info->IER |= UART_IER_MSI;
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
+ info->state->flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
} else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->state->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->state->flags &= ~ASYNC_CHECK_CD;
else {
- info->flags |= ASYNC_CHECK_CD;
+ info->state->flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
/* TBD:
@@ -1080,8 +1080,6 @@ static int set_serial_info(struct async_struct * info,
return -EPERM;
state->flags = ((state->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
state->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
@@ -1099,15 +1097,13 @@ static int set_serial_info(struct async_struct * info,
state->baud_base = new_serial.baud_base;
state->flags = ((state->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
- info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
- (info->flags & ASYNC_INTERNAL_FLAGS));
state->custom_divisor = new_serial.custom_divisor;
state->close_delay = new_serial.close_delay * HZ/100;
state->closing_wait = new_serial.closing_wait * HZ/100;
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->tty->low_latency = (state->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
- if (info->flags & ASYNC_INITIALIZED) {
+ if (state->flags & ASYNC_INITIALIZED) {
if (((old_state.flags & ASYNC_SPD_MASK) !=
(state->flags & ASYNC_SPD_MASK)) ||
(old_state.custom_divisor != state->custom_divisor)) {
@@ -1437,7 +1433,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
local_irq_restore(flags);
return;
}
- info->flags |= ASYNC_CLOSING;
+ state->flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
@@ -1452,7 +1448,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
* line status register.
*/
info->read_status_mask &= ~UART_LSR_DR;
- if (info->flags & ASYNC_INITIALIZED) {
+ if (state->flags & ASYNC_INITIALIZED) {
/* disable receive interrupts */
custom.intena = IF_RBF;
mb();
@@ -1479,7 +1475,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
}
wake_up_interruptible(&info->open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
local_irq_restore(flags);
}
@@ -1563,7 +1559,7 @@ static void rs_hangup(struct tty_struct *tty)
rs_flush_buffer(tty);
shutdown(info);
state->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ state->flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1591,11 +1587,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
+ (state->flags & ASYNC_CLOSING)) {
+ if (state->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ return ((state->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
@@ -1608,7 +1604,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ state->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1642,9 +1638,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
local_irq_restore(flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
+ !(state->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
+ if (state->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -1653,7 +1649,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
#endif
break;
}
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(state->flags & ASYNC_CLOSING) &&
(do_clocal || (!(ciab.pra & SER_DCD)) ))
break;
if (signal_pending(current)) {
@@ -1679,7 +1675,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
#endif
if (retval)
return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ state->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1705,7 +1701,6 @@ static int get_async_struct(int line, struct async_struct **ret_info)
init_waitqueue_head(&info->delta_msr_wait);
#endif
info->port = sstate->port;
- info->flags = sstate->flags;
info->xmit_fifo_size = sstate->xmit_fifo_size;
info->line = line;
info->state = sstate;
@@ -1741,17 +1736,17 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open %s, count = %d\n", tty->name, info->state->count);
#endif
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->tty->low_latency = (info->state->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
/*
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
+ (info->state->flags & ASYNC_CLOSING)) {
+ if (info->state->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ return ((info->state->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
@@ -1799,7 +1794,6 @@ static inline void line_info(struct seq_file *m, struct serial_state *state)
if (!info) {
info = &scr_info; /* This is just for serial_{in,out} */
- info->flags = state->flags;
info->quot = 0;
info->tty = NULL;
}
--
1.7.9.2
next prev parent reply other threads:[~2012-03-05 13:53 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-05 13:51 [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Jiri Slaby
2012-03-05 13:51 ` [PATCH 01/68] USB: cdc-acm, use tty_standard_install Jiri Slaby
2012-03-05 14:03 ` Jiri Slaby
2012-03-05 14:14 ` Oliver Neukum
2012-03-05 23:39 ` Alan Cox
2012-03-05 13:51 ` [PATCH 02/68] TTY: tty_io, remove buffer re-assignments Jiri Slaby
2012-03-05 13:51 ` [PATCH 03/68] TTY: let alloc_tty_driver deduce the owner automatically Jiri Slaby
2012-03-05 13:51 ` [PATCH 04/68] TTY: remove minor_num from tty_driver Jiri Slaby
2012-03-05 13:51 ` [PATCH 05/68] TTY: remove re-assignments to tty_driver members Jiri Slaby
2012-03-06 23:49 ` Tilman Schmidt
2012-03-05 13:51 ` [PATCH 06/68] TTY: simplify tty_driver_lookup_tty a bit Jiri Slaby
2012-03-05 13:51 ` [PATCH 07/68] TTY: remove tty driver re-set from tty_reopen Jiri Slaby
2012-03-05 13:51 ` [PATCH 08/68] TTY: serial, simplify ASYNC_USR_MASK Jiri Slaby
2012-03-05 13:51 ` [PATCH 09/68] TTY: tty_driver, document tty->ops->shutdown limitation Jiri Slaby
2012-03-05 13:51 ` [PATCH 10/68] ALPHA: srmcons, use timer functions Jiri Slaby
2012-03-05 13:51 ` [PATCH 11/68] ALPHA: srmcons, fix racy singleton structure Jiri Slaby
2012-03-05 13:51 ` [PATCH 12/68] TTY: srmcons, convert to use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 13/68] TTY: serialP, remove DECLARE_WAITQUEUE check Jiri Slaby
2012-03-05 13:52 ` [PATCH 14/68] TTY: remove unneeded tty->index checks Jiri Slaby
2012-03-05 13:52 ` [PATCH 15/68] TTY: ipwireless, fix tty->index handling Jiri Slaby
2012-03-05 14:03 ` Jiri Kosina
2012-03-05 13:52 ` [PATCH 16/68] NET: pc300, do not zero global variables Jiri Slaby
2012-03-05 13:52 ` [PATCH 17/68] NET: pc300, show version info from module init Jiri Slaby
2012-03-05 13:52 ` [PATCH 18/68] XTENSA: iss/console, use setup_timer Jiri Slaby
2012-03-05 13:52 ` [PATCH 19/68] XTENSA: iss/console, fix potential deadlock Jiri Slaby
2012-03-05 13:52 ` [PATCH 20/68] TTY: iss/console, use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 21/68] TTY: serial, use atomic_inc_return in ioc4_serial Jiri Slaby
2012-03-05 13:52 ` [PATCH 22/68] TTY: serial, include pci.h in m32r_sio Jiri Slaby
2012-03-05 13:52 ` [PATCH 23/68] TTY: remove serialP.h inclusion from some files Jiri Slaby
2012-03-05 13:52 ` [PATCH 24/68] TTY: speakup, do not use serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 25/68] TTY: serialP, remove unused material Jiri Slaby
2012-03-05 13:52 ` [PATCH 26/68] TTY: amiserial, remove tasklet for tty_wakeup Jiri Slaby
2012-03-05 13:52 ` Jiri Slaby [this message]
2012-03-05 13:52 ` [PATCH 28/68] TTY: simserial, use only one copy of async flags Jiri Slaby
2012-03-05 13:52 ` [PATCH 29/68] TTY: simserial/amiserial, use one instance of other members Jiri Slaby
2012-03-05 13:52 ` [PATCH 30/68] TTY: simserial, remove support of shared interrupts Jiri Slaby
2012-03-05 13:52 ` [PATCH 31/68] TTY: simserial, remove IRQ_T Jiri Slaby
2012-03-05 13:52 ` [PATCH 32/68] TTY: amiserial, remove IRQ_ports Jiri Slaby
2012-03-05 13:52 ` [PATCH 33/68] TTY: serialP, merge serial_state and async_struct Jiri Slaby
2012-03-05 13:52 ` [PATCH 34/68] TTY: amiserial, simplify set_serial_info Jiri Slaby
2012-03-05 13:52 ` [PATCH 35/68] TTY: amiserial, pass tty down to functions Jiri Slaby
2012-03-05 13:52 ` [PATCH 36/68] TTY: simserial, " Jiri Slaby
2012-03-05 13:52 ` [PATCH 37/68] TTY: amiserial/simserial, use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 38/68] TTY: amiserial/simserial, use close delays from tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 39/68] TTY: amiserial/simserial, use count " Jiri Slaby
2012-03-05 13:52 ` [PATCH 40/68] TTY: amiserial/simserial, use flags " Jiri Slaby
2012-03-05 13:52 ` [PATCH 41/68] TTY: simserial, remove static initialization Jiri Slaby
2012-03-05 13:52 ` [PATCH 42/68] TTY: simserial, remove tmp_buf Jiri Slaby
2012-03-05 13:52 ` [PATCH 43/68] TTY: simserial, stop using serial_state->{line,icount} Jiri Slaby
2012-03-05 13:52 ` [PATCH 44/68] TTY: simserial no longer needs serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 45/68] TTY: simserial, define local tty_port pointer Jiri Slaby
2012-03-05 13:52 ` [PATCH 46/68] TTY: simserial, remove some tty ops Jiri Slaby
2012-03-05 13:52 ` [PATCH 48/68] TTY: simserial, use tty_port_close_start Jiri Slaby
2012-03-05 13:52 ` [PATCH 49/68] TTY: simserial, properly refcount tty_port->tty Jiri Slaby
2012-03-05 13:52 ` [PATCH 50/68] TTY: simserial, use tty_port_open Jiri Slaby
2012-03-05 13:52 ` [PATCH 51/68] TTY: simserial, use tty_port_hangup Jiri Slaby
2012-03-05 13:52 ` [PATCH 52/68] TTY: simserial, remove useless comments Jiri Slaby
2012-03-05 13:52 ` [PATCH 53/68] TTY: simserial, fix includes Jiri Slaby
2012-03-05 13:52 ` [PATCH 54/68] TTY: simserial, reindent some code Jiri Slaby
2012-03-05 13:52 ` [PATCH 55/68] TTY: simserial, final cleanup Jiri Slaby
2012-03-05 13:52 ` [PATCH 56/68] TTY: amiserial, define local tty_port pointer Jiri Slaby
2012-03-05 13:52 ` [PATCH 57/68] TTY: amiserial, stop using serial_state->{irq,type,line} Jiri Slaby
2012-03-05 13:52 ` [PATCH 58/68] TTY: amiserial no longer needs serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 59/68] TTY: amiserial, provide carrier helpers Jiri Slaby
2012-03-05 13:52 ` [PATCH 60/68] TTY: amiserial, use tty_port_block_til_ready Jiri Slaby
2012-03-05 13:52 ` [PATCH 61/68] TTY: amiserial, use tty_port_close_end Jiri Slaby
2012-03-05 13:52 ` [PATCH 62/68] TTY: amiserial, use tty_port_close_start Jiri Slaby
2012-03-05 13:52 ` [PATCH 63/68] TTY: pdc_cons, fix racy tty test Jiri Slaby
2012-03-05 13:52 ` [PATCH 64/68] TTY: pdc_cons, fix open vs timer race Jiri Slaby
2012-03-05 13:52 ` [PATCH 65/68] TTY: pdc_cons, fix open vs pdc_console_tty_driver race Jiri Slaby
2012-03-05 13:52 ` [PATCH 66/68] TTY: pdc_cons, use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 67/68] TTY: isdn/gigaset, do not set tty->driver_data to NULL Jiri Slaby
2012-03-05 17:05 ` Tilman Schmidt
2012-03-05 17:12 ` Jiri Slaby
2012-03-05 13:52 ` [PATCH 68/68] TTY: isdn/gigaset, use tty_port Jiri Slaby
2012-03-05 17:08 ` Tilman Schmidt
2012-03-08 19:50 ` [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Greg KH
2012-03-08 20:01 ` [PATCH 1/4] [IA64] hpsim, fix SAL handling in fw-emu Jiri Slaby
2012-03-08 20:01 ` [PATCH 2/4] [IA64] simserial, include some headers Jiri Slaby
2012-03-08 20:01 ` [PATCH 3/4] [IA64] hpsim, initialize chip for assigned irqs Jiri Slaby
2012-03-08 20:01 ` [PATCH 4/4] [IA64] simserial, bail out when request_irq fails Jiri Slaby
2012-03-08 20:29 ` [PATCH 1/4] [IA64] hpsim, fix SAL handling in fw-emu Greg KH
2012-03-08 20:51 ` [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Greg KH
2012-03-18 8:56 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330955575-26641-28-git-send-email-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=alan@linux.intel.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®