From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: alan@linux.intel.com, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org, jirislaby@gmail.com,
Geert Uytterhoeven <geert@linux-m68k.org>,
Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>
Subject: [PATCH 37/68] TTY: amiserial/simserial, use tty_port
Date: Mon, 5 Mar 2012 14:52:24 +0100 [thread overview]
Message-ID: <1330955575-26641-38-git-send-email-jslaby@suse.cz> (raw)
In-Reply-To: <1330955575-26641-1-git-send-email-jslaby@suse.cz>
Add tty_port to serial_state and start using common tty port members
from tty_port in amiserial and simserial. The rest will follow one by
one.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
---
arch/ia64/hp/sim/simserial.c | 24 ++++++++--------
drivers/tty/amiserial.c | 63 +++++++++++++++++++++---------------------
include/linux/serialP.h | 7 ++---
3 files changed, 45 insertions(+), 49 deletions(-)
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index a76a27e..614c091 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -165,7 +165,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
{
struct serial_state *info = dev_id;
- if (!info->tty) {
+ if (!info->tport.tty) {
printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
return IRQ_NONE;
}
@@ -173,7 +173,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
* pretty simple in our case, because we only get interrupts
* on inbound traffic
*/
- receive_chars(info->tty);
+ receive_chars(info->tport.tty);
return IRQ_HANDLED;
}
@@ -533,14 +533,14 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
shutdown(tty, info);
rs_flush_buffer(tty);
tty_ldisc_flush(tty);
- info->tty = NULL;
- if (info->blocked_open) {
+ info->tport.tty = NULL;
+ if (info->tport.blocked_open) {
if (info->close_delay)
schedule_timeout_interruptible(info->close_delay);
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->tport.open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->tport.close_wait);
}
/*
@@ -569,8 +569,8 @@ static void rs_hangup(struct tty_struct *tty)
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->tport.tty = NULL;
+ wake_up_interruptible(&info->tport.open_wait);
}
@@ -662,8 +662,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
unsigned long page;
info->count++;
- info->tty = tty;
+ info->tport.tty = tty;
tty->driver_data = info;
+ tty->port = &info->tport;
#ifdef SIMSERIAL_DEBUG
printk("rs_open %s, count = %d\n", tty->name, info->count);
@@ -685,7 +686,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
*/
if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -827,8 +828,7 @@ simrs_init (void)
* Let's have a little bit of fun !
*/
for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
- init_waitqueue_head(&state->open_wait);
- init_waitqueue_head(&state->close_wait);
+ tty_port_init(&state->tport);
if (state->type == PORT_UNKNOWN) continue;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 5b87744..71d3331 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -234,7 +234,7 @@ static void receive_chars(struct serial_state *info)
{
int status;
int serdatr;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->tport.tty;
unsigned char ch, flag;
struct async_icount *icount;
int oe = 0;
@@ -331,8 +331,8 @@ static void transmit_chars(struct serial_state *info)
return;
}
if (info->xmit.head == info->xmit.tail
- || info->tty->stopped
- || info->tty->hw_stopped) {
+ || info->tport.tty->stopped
+ || info->tport.tty->hw_stopped) {
info->IER &= ~UART_IER_THRI;
custom.intena = IF_TBE;
mb();
@@ -347,7 +347,7 @@ static void transmit_chars(struct serial_state *info)
if (CIRC_CNT(info->xmit.head,
info->xmit.tail,
SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
@@ -384,7 +384,7 @@ static void check_modem_status(struct serial_state *info)
}
if (dstatus & SER_CTS)
icount->cts++;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
}
if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
@@ -393,29 +393,29 @@ static void check_modem_status(struct serial_state *info)
(!(status & SER_DCD)) ? "on" : "off");
#endif
if (!(status & SER_DCD))
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->tport.open_wait);
else {
#ifdef SERIAL_DEBUG_OPEN
printk("doing serial hangup...");
#endif
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->tport.tty)
+ tty_hangup(info->tport.tty);
}
}
if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty->hw_stopped) {
+ if (info->tport.tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
- info->tty->hw_stopped = 0;
+ info->tport.tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
custom.intreq = IF_SETCLR | IF_TBE;
mb();
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
return;
}
} else {
@@ -423,7 +423,7 @@ static void check_modem_status(struct serial_state *info)
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
- info->tty->hw_stopped = 1;
+ info->tport.tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
custom.intena = IF_TBE;
@@ -456,7 +456,7 @@ static irqreturn_t ser_rx_int(int irq, void *dev_id)
printk("ser_rx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
receive_chars(info);
@@ -475,7 +475,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id)
printk("ser_tx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
transmit_chars(info);
@@ -607,7 +607,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
* here so the queue might never be waken up
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
/*
* Free the IRQ, if necessary
@@ -1274,7 +1274,7 @@ static int rs_ioctl(struct tty_struct *tty,
cprev = info->icount;
local_irq_restore(flags);
while (1) {
- interruptible_sleep_on(&info->delta_msr_wait);
+ interruptible_sleep_on(&info->tport.delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
@@ -1442,15 +1442,15 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
tty_ldisc_flush(tty);
tty->closing = 0;
- state->tty = NULL;
- if (state->blocked_open) {
+ state->tport.tty = NULL;
+ if (state->tport.blocked_open) {
if (state->close_delay) {
msleep_interruptible(jiffies_to_msecs(state->close_delay));
}
- wake_up_interruptible(&state->open_wait);
+ wake_up_interruptible(&state->tport.open_wait);
}
state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&state->close_wait);
+ wake_up_interruptible(&state->tport.close_wait);
local_irq_restore(flags);
}
@@ -1531,8 +1531,8 @@ static void rs_hangup(struct tty_struct *tty)
shutdown(tty, info);
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->tport.tty = NULL;
+ wake_up_interruptible(&info->tport.open_wait);
}
/*
@@ -1559,7 +1559,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1589,7 +1589,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->tport.open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
info->line, info->count);
@@ -1600,7 +1600,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
info->count--;
}
local_irq_restore(flags);
- info->blocked_open++;
+ info->tport.blocked_open++;
while (1) {
local_irq_save(flags);
if (tty->termios->c_cflag & CBAUD)
@@ -1635,10 +1635,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
tty_lock();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->tport.open_wait, &wait);
if (extra_count)
info->count++;
- info->blocked_open--;
+ info->tport.blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
info->line, info->count);
@@ -1661,8 +1661,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
int retval;
info->count++;
- info->tty = tty;
+ info->tport.tty = tty;
tty->driver_data = info;
+ tty->port = &info->tport;
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;
@@ -1677,7 +1678,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1869,9 +1870,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
- init_waitqueue_head(&state->open_wait);
- init_waitqueue_head(&state->close_wait);
- init_waitqueue_head(&state->delta_msr_wait);
+ tty_port_init(&state->tport);
printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
state->line);
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
index 984f5ba..32d45b8 100644
--- a/include/linux/serialP.h
+++ b/include/linux/serialP.h
@@ -23,6 +23,7 @@
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
+#include <linux/tty.h>
#include <linux/wait.h>
struct serial_state {
@@ -38,6 +39,7 @@ struct serial_state {
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */
struct async_icount icount;
+ struct tty_port tport;
/* amiserial */
int read_status_mask;
@@ -46,14 +48,9 @@ struct serial_state {
int quot;
int IER; /* Interrupt Enable Register */
int MCR; /* Modem control register */
- wait_queue_head_t delta_msr_wait;
/* simserial */
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
struct circ_buf xmit;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct tty_struct *tty;
/* /simserial */
/* /amiserial */
};
--
1.7.9.2
next prev parent reply other threads:[~2012-03-05 13:53 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-05 13:51 [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Jiri Slaby
2012-03-05 13:51 ` [PATCH 01/68] USB: cdc-acm, use tty_standard_install Jiri Slaby
2012-03-05 14:03 ` Jiri Slaby
2012-03-05 14:14 ` Oliver Neukum
2012-03-05 23:39 ` Alan Cox
2012-03-05 13:51 ` [PATCH 02/68] TTY: tty_io, remove buffer re-assignments Jiri Slaby
2012-03-05 13:51 ` [PATCH 03/68] TTY: let alloc_tty_driver deduce the owner automatically Jiri Slaby
2012-03-05 13:51 ` [PATCH 04/68] TTY: remove minor_num from tty_driver Jiri Slaby
2012-03-05 13:51 ` [PATCH 05/68] TTY: remove re-assignments to tty_driver members Jiri Slaby
2012-03-06 23:49 ` Tilman Schmidt
2012-03-05 13:51 ` [PATCH 06/68] TTY: simplify tty_driver_lookup_tty a bit Jiri Slaby
2012-03-05 13:51 ` [PATCH 07/68] TTY: remove tty driver re-set from tty_reopen Jiri Slaby
2012-03-05 13:51 ` [PATCH 08/68] TTY: serial, simplify ASYNC_USR_MASK Jiri Slaby
2012-03-05 13:51 ` [PATCH 09/68] TTY: tty_driver, document tty->ops->shutdown limitation Jiri Slaby
2012-03-05 13:51 ` [PATCH 10/68] ALPHA: srmcons, use timer functions Jiri Slaby
2012-03-05 13:51 ` [PATCH 11/68] ALPHA: srmcons, fix racy singleton structure Jiri Slaby
2012-03-05 13:51 ` [PATCH 12/68] TTY: srmcons, convert to use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 13/68] TTY: serialP, remove DECLARE_WAITQUEUE check Jiri Slaby
2012-03-05 13:52 ` [PATCH 14/68] TTY: remove unneeded tty->index checks Jiri Slaby
2012-03-05 13:52 ` [PATCH 15/68] TTY: ipwireless, fix tty->index handling Jiri Slaby
2012-03-05 14:03 ` Jiri Kosina
2012-03-05 13:52 ` [PATCH 16/68] NET: pc300, do not zero global variables Jiri Slaby
2012-03-05 13:52 ` [PATCH 17/68] NET: pc300, show version info from module init Jiri Slaby
2012-03-05 13:52 ` [PATCH 18/68] XTENSA: iss/console, use setup_timer Jiri Slaby
2012-03-05 13:52 ` [PATCH 19/68] XTENSA: iss/console, fix potential deadlock Jiri Slaby
2012-03-05 13:52 ` [PATCH 20/68] TTY: iss/console, use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 21/68] TTY: serial, use atomic_inc_return in ioc4_serial Jiri Slaby
2012-03-05 13:52 ` [PATCH 22/68] TTY: serial, include pci.h in m32r_sio Jiri Slaby
2012-03-05 13:52 ` [PATCH 23/68] TTY: remove serialP.h inclusion from some files Jiri Slaby
2012-03-05 13:52 ` [PATCH 24/68] TTY: speakup, do not use serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 25/68] TTY: serialP, remove unused material Jiri Slaby
2012-03-05 13:52 ` [PATCH 26/68] TTY: amiserial, remove tasklet for tty_wakeup Jiri Slaby
2012-03-05 13:52 ` [PATCH 27/68] TTY: amiserial, use only one copy of async flags Jiri Slaby
2012-03-05 13:52 ` [PATCH 28/68] TTY: simserial, " Jiri Slaby
2012-03-05 13:52 ` [PATCH 29/68] TTY: simserial/amiserial, use one instance of other members Jiri Slaby
2012-03-05 13:52 ` [PATCH 30/68] TTY: simserial, remove support of shared interrupts Jiri Slaby
2012-03-05 13:52 ` [PATCH 31/68] TTY: simserial, remove IRQ_T Jiri Slaby
2012-03-05 13:52 ` [PATCH 32/68] TTY: amiserial, remove IRQ_ports Jiri Slaby
2012-03-05 13:52 ` [PATCH 33/68] TTY: serialP, merge serial_state and async_struct Jiri Slaby
2012-03-05 13:52 ` [PATCH 34/68] TTY: amiserial, simplify set_serial_info Jiri Slaby
2012-03-05 13:52 ` [PATCH 35/68] TTY: amiserial, pass tty down to functions Jiri Slaby
2012-03-05 13:52 ` [PATCH 36/68] TTY: simserial, " Jiri Slaby
2012-03-05 13:52 ` Jiri Slaby [this message]
2012-03-05 13:52 ` [PATCH 38/68] TTY: amiserial/simserial, use close delays from tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 39/68] TTY: amiserial/simserial, use count " Jiri Slaby
2012-03-05 13:52 ` [PATCH 40/68] TTY: amiserial/simserial, use flags " Jiri Slaby
2012-03-05 13:52 ` [PATCH 41/68] TTY: simserial, remove static initialization Jiri Slaby
2012-03-05 13:52 ` [PATCH 42/68] TTY: simserial, remove tmp_buf Jiri Slaby
2012-03-05 13:52 ` [PATCH 43/68] TTY: simserial, stop using serial_state->{line,icount} Jiri Slaby
2012-03-05 13:52 ` [PATCH 44/68] TTY: simserial no longer needs serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 45/68] TTY: simserial, define local tty_port pointer Jiri Slaby
2012-03-05 13:52 ` [PATCH 46/68] TTY: simserial, remove some tty ops Jiri Slaby
2012-03-05 13:52 ` [PATCH 48/68] TTY: simserial, use tty_port_close_start Jiri Slaby
2012-03-05 13:52 ` [PATCH 49/68] TTY: simserial, properly refcount tty_port->tty Jiri Slaby
2012-03-05 13:52 ` [PATCH 50/68] TTY: simserial, use tty_port_open Jiri Slaby
2012-03-05 13:52 ` [PATCH 51/68] TTY: simserial, use tty_port_hangup Jiri Slaby
2012-03-05 13:52 ` [PATCH 52/68] TTY: simserial, remove useless comments Jiri Slaby
2012-03-05 13:52 ` [PATCH 53/68] TTY: simserial, fix includes Jiri Slaby
2012-03-05 13:52 ` [PATCH 54/68] TTY: simserial, reindent some code Jiri Slaby
2012-03-05 13:52 ` [PATCH 55/68] TTY: simserial, final cleanup Jiri Slaby
2012-03-05 13:52 ` [PATCH 56/68] TTY: amiserial, define local tty_port pointer Jiri Slaby
2012-03-05 13:52 ` [PATCH 57/68] TTY: amiserial, stop using serial_state->{irq,type,line} Jiri Slaby
2012-03-05 13:52 ` [PATCH 58/68] TTY: amiserial no longer needs serialP Jiri Slaby
2012-03-05 13:52 ` [PATCH 59/68] TTY: amiserial, provide carrier helpers Jiri Slaby
2012-03-05 13:52 ` [PATCH 60/68] TTY: amiserial, use tty_port_block_til_ready Jiri Slaby
2012-03-05 13:52 ` [PATCH 61/68] TTY: amiserial, use tty_port_close_end Jiri Slaby
2012-03-05 13:52 ` [PATCH 62/68] TTY: amiserial, use tty_port_close_start Jiri Slaby
2012-03-05 13:52 ` [PATCH 63/68] TTY: pdc_cons, fix racy tty test Jiri Slaby
2012-03-05 13:52 ` [PATCH 64/68] TTY: pdc_cons, fix open vs timer race Jiri Slaby
2012-03-05 13:52 ` [PATCH 65/68] TTY: pdc_cons, fix open vs pdc_console_tty_driver race Jiri Slaby
2012-03-05 13:52 ` [PATCH 66/68] TTY: pdc_cons, use tty_port Jiri Slaby
2012-03-05 13:52 ` [PATCH 67/68] TTY: isdn/gigaset, do not set tty->driver_data to NULL Jiri Slaby
2012-03-05 17:05 ` Tilman Schmidt
2012-03-05 17:12 ` Jiri Slaby
2012-03-05 13:52 ` [PATCH 68/68] TTY: isdn/gigaset, use tty_port Jiri Slaby
2012-03-05 17:08 ` Tilman Schmidt
2012-03-08 19:50 ` [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Greg KH
2012-03-08 20:01 ` [PATCH 1/4] [IA64] hpsim, fix SAL handling in fw-emu Jiri Slaby
2012-03-08 20:01 ` [PATCH 2/4] [IA64] simserial, include some headers Jiri Slaby
2012-03-08 20:01 ` [PATCH 3/4] [IA64] hpsim, initialize chip for assigned irqs Jiri Slaby
2012-03-08 20:01 ` [PATCH 4/4] [IA64] simserial, bail out when request_irq fails Jiri Slaby
2012-03-08 20:29 ` [PATCH 1/4] [IA64] hpsim, fix SAL handling in fw-emu Greg KH
2012-03-08 20:51 ` [PATCH 00/68] TTY buffer in tty_port -- prep no. 1 Greg KH
2012-03-18 8:56 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330955575-26641-38-git-send-email-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=alan@linux.intel.com \
--cc=fenghua.yu@intel.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®