[PATCH 1/2] iommu/amd: Make sure IOMMU interrupts are re-enabled on resume

[PATCH 1/2] iommu/amd: Make sure IOMMU interrupts are re-enabled on resume

[Joerg Roedel]

Unfortunatly the interrupts for the event log and the
peripheral page-faults are only enabled at boot but not
re-enabled at resume. Fix that.

Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/iommu/amd_iommu_init.c |   30 ++++++++++++++++++++----------
 1 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 526652a..182b80b 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1123,8 +1123,9 @@ static int iommu_setup_msi(struct amd_iommu *iommu)
 {
 	int r;
 
-	if (pci_enable_msi(iommu->dev))
-		return 1;
+	r = pci_enable_msi(iommu->dev);
+	if (r)
+		return r;
 
 	r = request_threaded_irq(iommu->dev->irq,
 				 amd_iommu_int_handler,
@@ -1134,27 +1135,36 @@ static int iommu_setup_msi(struct amd_iommu *iommu)
 
 	if (r) {
 		pci_disable_msi(iommu->dev);
-		return 1;
+		return r;
 	}
 
 	iommu->int_enabled = true;
-	iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
-
-	if (iommu->ppr_log != NULL)
-		iommu_feature_enable(iommu, CONTROL_PPFINT_EN);
 
 	return 0;
 }
 
 static int iommu_init_msi(struct amd_iommu *iommu)
 {
+	int ret;
+
 	if (iommu->int_enabled)
-		return 0;
+		goto enable_faults;
 
 	if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSI))
-		return iommu_setup_msi(iommu);
+		ret = iommu_setup_msi(iommu);
+	else
+		ret = -ENODEV;
 
-	return 1;
+	if (ret)
+		return ret;
+
+enable_faults:
+	iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
+
+	if (iommu->ppr_log != NULL)
+		iommu_feature_enable(iommu, CONTROL_PPFINT_EN);
+
+	return 0;
 }
 
 /****************************************************************************
-- 
1.7.5.4

[PATCH 2/2] iommu/amd: Move interrupt setup code into seperate function

[Joerg Roedel]

For interrupt remapping the enablement of the IOMMU MSI
interrupt needs to be deferred because the IOMMU itself will
be initialized before the io-apics are up and running. So
the code to setup the MSI is moved seperated from the
hardware-setup routine now.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/iommu/amd_iommu_init.c |   24 +++++++++++++++++++++++-
 1 files changed, 23 insertions(+), 1 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 182b80b..8b026bf 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -196,6 +196,8 @@ static u32 rlookup_table_size;	/* size if the rlookup table */
  */
 extern void iommu_flush_all_caches(struct amd_iommu *iommu);
 
+static int __init amd_iommu_enable_interrupts(void);
+
 static inline void update_last_devid(u16 devid)
 {
 	if (devid > amd_iommu_last_bdf)
@@ -1383,7 +1385,6 @@ static void enable_iommus(void)
 		iommu_enable_ppr_log(iommu);
 		iommu_enable_gt(iommu);
 		iommu_set_exclusion_range(iommu);
-		iommu_init_msi(iommu);
 		iommu_enable(iommu);
 		iommu_flush_all_caches(iommu);
 	}
@@ -1411,6 +1412,8 @@ static void amd_iommu_resume(void)
 
 	/* re-load the hardware */
 	enable_iommus();
+
+	amd_iommu_enable_interrupts();
 }
 
 static int amd_iommu_suspend(void)
@@ -1595,6 +1598,21 @@ free:
 	return ret;
 }
 
+static int __init amd_iommu_enable_interrupts(void)
+{
+	struct amd_iommu *iommu;
+	int ret = 0;
+
+	for_each_iommu(iommu) {
+		ret = iommu_init_msi(iommu);
+		if (ret)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+
 /*
  * This is the core init function for AMD IOMMU hardware in the system.
  * This function is called from the generic x86 DMA layer initialization
@@ -1612,6 +1630,10 @@ static int __init amd_iommu_init(void)
 	if (ret)
 		goto out;
 
+	ret = amd_iommu_enable_interrupts();
+	if (ret)
+		goto free;
+
 	if (iommu_pass_through)
 		ret = amd_iommu_init_passthrough();
 	else
-- 
1.7.5.4