* [PATCH 1/2] regulator: fixed: Use devm_kzalloc()
@ 2012-03-21 20:11 Mark Brown
2012-03-21 20:11 ` [PATCH 2/2] regulator: fixed: Don't supply voltage change ops when no GPIO is given Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Mark Brown @ 2012-03-21 20:11 UTC (permalink / raw)
To: Liam Girdwood; +Cc: linux-kernel, patches, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/fixed.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 40f3803..7d4f381 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -176,7 +176,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
if (!config)
return -ENOMEM;
- drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
+ GFP_KERNEL);
if (drvdata == NULL) {
dev_err(&pdev->dev, "Failed to allocate device data\n");
ret = -ENOMEM;
@@ -270,7 +271,6 @@ err_gpio:
err_name:
kfree(drvdata->desc.name);
err:
- kfree(drvdata);
return ret;
}
@@ -282,7 +282,6 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
if (gpio_is_valid(drvdata->gpio))
gpio_free(drvdata->gpio);
kfree(drvdata->desc.name);
- kfree(drvdata);
return 0;
}
--
1.7.9.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 2/2] regulator: fixed: Don't supply voltage change ops when no GPIO is given
2012-03-21 20:11 [PATCH 1/2] regulator: fixed: Use devm_kzalloc() Mark Brown
@ 2012-03-21 20:11 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2012-03-21 20:11 UTC (permalink / raw)
To: Liam Girdwood; +Cc: linux-kernel, patches, Mark Brown
Rather than replicating the core support for always on regulators use
a different set of ops with none of the enable related operations provided
when we don't have any ops. This ensures that we automatically pick up
any enhanced support for such regulators that the core has such as the
warnings about regulation constraints that can't be used.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/fixed.c | 27 +++++++++++++--------------
1 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 7d4f381..8a1e22a 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -105,10 +105,8 @@ static int fixed_voltage_enable(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
- if (gpio_is_valid(data->gpio)) {
- gpio_set_value_cansleep(data->gpio, data->enable_high);
- data->is_enabled = true;
- }
+ gpio_set_value_cansleep(data->gpio, data->enable_high);
+ data->is_enabled = true;
return 0;
}
@@ -117,10 +115,8 @@ static int fixed_voltage_disable(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
- if (gpio_is_valid(data->gpio)) {
- gpio_set_value_cansleep(data->gpio, !data->enable_high);
- data->is_enabled = false;
- }
+ gpio_set_value_cansleep(data->gpio, !data->enable_high);
+ data->is_enabled = false;
return 0;
}
@@ -153,7 +149,7 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
return data->microvolts;
}
-static struct regulator_ops fixed_voltage_ops = {
+static struct regulator_ops fixed_voltage_gpio_ops = {
.is_enabled = fixed_voltage_is_enabled,
.enable = fixed_voltage_enable,
.disable = fixed_voltage_disable,
@@ -162,6 +158,11 @@ static struct regulator_ops fixed_voltage_ops = {
.list_voltage = fixed_voltage_list_voltage,
};
+static struct regulator_ops fixed_voltage_ops = {
+ .get_voltage = fixed_voltage_get_voltage,
+ .list_voltage = fixed_voltage_list_voltage,
+};
+
static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
{
struct fixed_voltage_config *config;
@@ -192,7 +193,6 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
- drvdata->desc.ops = &fixed_voltage_ops;
if (config->microvolts)
drvdata->desc.n_voltages = 1;
@@ -242,11 +242,10 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
goto err_gpio;
}
+ drvdata->desc.ops = &fixed_voltage_gpio_ops;
+
} else {
- /* Regulator without GPIO control is considered
- * always enabled
- */
- drvdata->is_enabled = true;
+ drvdata->desc.ops = &fixed_voltage_ops;
}
drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
--
1.7.9.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-21 20:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-21 20:11 [PATCH 1/2] regulator: fixed: Use devm_kzalloc() Mark Brown
2012-03-21 20:11 ` [PATCH 2/2] regulator: fixed: Don't supply voltage change ops when no GPIO is given Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome