* [PATCH 1/6] kdb: Fix smatch warning on dbg_io_ops->is_console
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
@ 2012-03-29 22:48 ` Jason Wessel
2012-03-29 22:48 ` [PATCH 2/6] kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA Jason Wessel
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:48 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
The Smatch tool warned that the change from commit b8adde8dd
(kdb: Avoid using dbg_io_ops until it is initialized) should
add another null check later in the kdb_printf().
It is worth noting that the second use of dbg_io_ops->is_console
is protected by the KDB_PAGER state variable which would only
get set when kdb is fully active and initialized. If we
ever encounter changes or defects in the KDB_PAGER state
we do not want to crash the kernel in a kdb_printf/printk.
CC: Tim Bird <tim.bird@am.sony.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
kernel/debug/kdb/kdb_io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 9b5f17d..bb9520f 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -743,7 +743,7 @@ kdb_printit:
kdb_input_flush();
c = console_drivers;
- if (!dbg_io_ops->is_console) {
+ if (dbg_io_ops && !dbg_io_ops->is_console) {
len = strlen(moreprompt);
cp = moreprompt;
while (len--) {
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 2/6] kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
2012-03-29 22:48 ` [PATCH 1/6] kdb: Fix smatch warning on dbg_io_ops->is_console Jason Wessel
@ 2012-03-29 22:48 ` Jason Wessel
2012-03-29 22:48 ` [PATCH 3/6] kgdbts: (1 of 2) fix single step awareness to work correctly with SMP Jason Wessel
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:48 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
On x86 the kgdb test suite will oops when the kernel is compiled with
CONFIG_DEBUG_RODATA and you run the tests after boot time. This is
regression has existed since 2.6.26 by commit: b33cb815 (kgdbts: Use
HW breakpoints with CONFIG_DEBUG_RODATA).
The test suite can use hw breakpoints for all the tests, but it has to
execute the hardware breakpoint specific tests first in order to
determine that the hw breakpoints actually work. Specifically the
very first test causes an oops:
# echo V1I1 > /sys/module/kgdbts/parameters/kgdbts
kgdb: Registered I/O driver kgdbts.
kgdbts:RUN plant and detach test
Entering kdb (current=0xffff880017aa9320, pid 1078) on processor 0 due to Keyboard Entry
[0]kdb> kgdbts: ERROR PUT: end of test buffer on 'plant_and_detach_test' line 1 expected OK got $E14#aa
WARNING: at drivers/misc/kgdbts.c:730 run_simple_test+0x151/0x2c0()
[...oops clipped...]
This commit re-orders the running of the tests and puts the RODATA
check into its own function so as to correctly avoid the kernel oops
by detecting and using the hw breakpoints.
Cc: <stable@vger.kernel.org> # >= 2.6.26
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
drivers/misc/kgdbts.c | 52 ++++++++++++++++++++++++++-----------------------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 3f7ad83..997e94d 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -885,6 +885,22 @@ static void run_singlestep_break_test(void)
kgdbts_break_test();
}
+static void test_debug_rodata(void)
+{
+#ifdef CONFIG_DEBUG_RODATA
+ /* Until there is an api to write to read-only text segments, use
+ * HW breakpoints for the remainder of any tests, else print a
+ * failure message if hw breakpoints do not work.
+ */
+ if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+ eprintk("kgdbts: HW breakpoints BROKEN, ending tests\n");
+ return;
+ }
+ force_hwbrks = 1;
+ v1printk("kgdbts:Using HW breakpoints for SW breakpoint tests\n");
+#endif /* CONFIG_DEBUG_RODATA */
+}
+
static void kgdbts_run_tests(void)
{
char *ptr;
@@ -907,6 +923,18 @@ static void kgdbts_run_tests(void)
if (ptr)
sstep_test = simple_strtol(ptr+1, NULL, 10);
+ /* All HW break point tests */
+ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ hwbreaks_ok = 1;
+ v1printk("kgdbts:RUN hw breakpoint test\n");
+ run_breakpoint_test(1);
+ v1printk("kgdbts:RUN hw write breakpoint test\n");
+ run_hw_break_test(1);
+ v1printk("kgdbts:RUN access write breakpoint test\n");
+ run_hw_break_test(0);
+ }
+ test_debug_rodata();
+
/* required internal KGDB tests */
v1printk("kgdbts:RUN plant and detach test\n");
run_plant_and_detach_test(0);
@@ -924,35 +952,11 @@ static void kgdbts_run_tests(void)
/* ===Optional tests=== */
- /* All HW break point tests */
- if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
- hwbreaks_ok = 1;
- v1printk("kgdbts:RUN hw breakpoint test\n");
- run_breakpoint_test(1);
- v1printk("kgdbts:RUN hw write breakpoint test\n");
- run_hw_break_test(1);
- v1printk("kgdbts:RUN access write breakpoint test\n");
- run_hw_break_test(0);
- }
-
if (nmi_sleep) {
v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep);
run_nmi_sleep_test(nmi_sleep);
}
-#ifdef CONFIG_DEBUG_RODATA
- /* Until there is an api to write to read-only text segments, use
- * HW breakpoints for the remainder of any tests, else print a
- * failure message if hw breakpoints do not work.
- */
- if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
- eprintk("kgdbts: HW breakpoints do not work,"
- "skipping remaining tests\n");
- return;
- }
- force_hwbrks = 1;
-#endif /* CONFIG_DEBUG_RODATA */
-
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 3/6] kgdbts: (1 of 2) fix single step awareness to work correctly with SMP
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
2012-03-29 22:48 ` [PATCH 1/6] kdb: Fix smatch warning on dbg_io_ops->is_console Jason Wessel
2012-03-29 22:48 ` [PATCH 2/6] kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA Jason Wessel
@ 2012-03-29 22:48 ` Jason Wessel
2012-03-29 22:49 ` [PATCH 4/6] kgdbts: (2 " Jason Wessel
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:48 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
The do_fork and sys_open tests have never worked properly on anything
other than a UP configuration with the kgdb test suite. This is
because the test suite did not fully implement the behavior of a real
debugger. A real debugger tracks the state of what thread it asked to
single step and can correctly continue other threads of execution or
conditionally stop while waiting for the original thread single step
request to return.
Below is a simple method to cause a fatal kernel oops with the kgdb
test suite on a 4 processor x86 system:
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
echo V1I1F1000 > /sys/module/kgdbts/parameters/kgdbts
Very soon after starting the test the kernel will oops with a message like:
kgdbts: BP mismatch 3b7da66480 expected ffffffff8106a590
WARNING: at drivers/misc/kgdbts.c:303 check_and_rewind_pc+0xe0/0x100()
Call Trace:
[<ffffffff812994a0>] check_and_rewind_pc+0xe0/0x100
[<ffffffff81298945>] validate_simple_test+0x25/0xc0
[<ffffffff81298f77>] run_simple_test+0x107/0x2c0
[<ffffffff81298a18>] kgdbts_put_char+0x18/0x20
The warn will turn to a hard kernel crash shortly after that because
the pc will not get properly rewound to the right value after hitting
a breakpoint leading to a hard lockup.
This change is broken up into 2 pieces because archs that have hw
single stepping (2.6.26 and up) need different changes than archs that
do not have hw single stepping (3.0 and up). This change implements
the correct behavior for an arch that supports hw single stepping.
A minor defect was fixed where sys_open should be do_sys_open
for the sys_open break point test. This solves the problem of running
a 64 bit with a 32 bit user space. The sys_open() never gets called
when using the 32 bit file system for the kgdb testsuite because the
32 bit binaries invoke the compat_sys_open() call leading to the test
never completing.
In order to mimic a real debugger, the kgdb test suite now tracks the
most recent thread that was continued (cont_thread_id), with the
intent to single step just this thread. When the response to the
single step request stops in a different thread that hit the original
break point that thread will now get continued, while the debugger
waits for the thread with the single step pending. Here is a high
level description of the sequence of events.
cont_instead_of_sstep = 0;
1) set breakpoint at do_fork
2) continue
3) Save the thread id where we stop to cont_thread_id
4) Remove breakpoint at do_fork
5) Reset the PC if needed depending on kernel exception type
6) if (cont_instead_of_sstep) { continue } else { single step }
7) Check where we stopped
if current thread != cont_thread_id {
cont_instead_of_sstep = 1;
goto step 5
} else {
cont_instead_of_sstep = 0;
}
8) clean up and run test again if needed
Cc: stable@vger.kernel.org # >= 2.6.26
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
drivers/misc/kgdbts.c | 54 +++++++++++++++++++++++++++++++++++++++----------
1 file changed, 43 insertions(+), 11 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 997e94d..3cad9fc 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -134,6 +134,9 @@ static int force_hwbrks;
static int hwbreaks_ok;
static int hw_break_val;
static int hw_break_val2;
+static int cont_instead_of_sstep;
+static unsigned long cont_thread_id;
+static unsigned long sstep_thread_id;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
static int arch_needs_sstep_emulation = 1;
#else
@@ -211,7 +214,7 @@ static unsigned long lookup_addr(char *arg)
if (!strcmp(arg, "kgdbts_break_test"))
addr = (unsigned long)kgdbts_break_test;
else if (!strcmp(arg, "sys_open"))
- addr = (unsigned long)sys_open;
+ addr = (unsigned long)do_sys_open;
else if (!strcmp(arg, "do_fork"))
addr = (unsigned long)do_fork;
else if (!strcmp(arg, "hw_break_val"))
@@ -283,6 +286,16 @@ static void hw_break_val_write(void)
hw_break_val++;
}
+static int get_thread_id_continue(char *put_str, char *arg)
+{
+ char *ptr = &put_str[11];
+
+ if (put_str[1] != 'T' || put_str[2] != '0')
+ return 1;
+ kgdb_hex2long(&ptr, &cont_thread_id);
+ return 0;
+}
+
static int check_and_rewind_pc(char *put_str, char *arg)
{
unsigned long addr = lookup_addr(arg);
@@ -324,6 +337,18 @@ static int check_single_step(char *put_str, char *arg)
gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
v2printk("Singlestep stopped at IP: %lx\n",
instruction_pointer(&kgdbts_regs));
+
+ if (sstep_thread_id != cont_thread_id && !arch_needs_sstep_emulation) {
+ /*
+ * Ensure we stopped in the same thread id as before, else the
+ * debugger should continue until the original thread that was
+ * single stepped is scheduled again, emulating gdb's behavior.
+ */
+ v2printk("ThrID does not match: %lx\n", cont_thread_id);
+ cont_instead_of_sstep = 1;
+ ts.idx -= 4;
+ return 0;
+ }
if (instruction_pointer(&kgdbts_regs) == addr) {
eprintk("kgdbts: SingleStep failed at %lx\n",
instruction_pointer(&kgdbts_regs));
@@ -368,7 +393,12 @@ static int got_break(char *put_str, char *arg)
static void emul_sstep_get(char *arg)
{
if (!arch_needs_sstep_emulation) {
- fill_get_buf(arg);
+ if (cont_instead_of_sstep) {
+ cont_instead_of_sstep = 0;
+ fill_get_buf("c");
+ } else {
+ fill_get_buf(arg);
+ }
return;
}
switch (sstep_state) {
@@ -398,9 +428,11 @@ static void emul_sstep_get(char *arg)
static int emul_sstep_put(char *put_str, char *arg)
{
if (!arch_needs_sstep_emulation) {
- if (!strncmp(put_str+1, arg, 2))
- return 0;
- return 1;
+ char *ptr = &put_str[11];
+ if (put_str[1] != 'T' || put_str[2] != '0')
+ return 1;
+ kgdb_hex2long(&ptr, &sstep_thread_id);
+ return 0;
}
switch (sstep_state) {
case 1:
@@ -502,10 +534,10 @@ static struct test_struct bad_read_test[] = {
static struct test_struct singlestep_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
- { "c", "T0*", }, /* Continue */
+ { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
+ { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
{ "write", "OK", write_regs }, /* Write registers */
- { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
{ "g", "kgdbts_break_test", NULL, check_single_step },
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
@@ -523,10 +555,10 @@ static struct test_struct singlestep_break_test[] = {
static struct test_struct do_fork_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
- { "c", "T0*", }, /* Continue */
+ { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
+ { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
{ "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
{ "write", "OK", write_regs }, /* Write registers */
- { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
{ "g", "do_fork", NULL, check_single_step },
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
@@ -541,10 +573,10 @@ static struct test_struct do_fork_test[] = {
static struct test_struct sys_open_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
- { "c", "T0*", }, /* Continue */
+ { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
+ { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
{ "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
{ "write", "OK", write_regs }, /* Write registers */
- { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
{ "g", "sys_open", NULL, check_single_step },
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 4/6] kgdbts: (2 of 2) fix single step awareness to work correctly with SMP
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
` (2 preceding siblings ...)
2012-03-29 22:48 ` [PATCH 3/6] kgdbts: (1 of 2) fix single step awareness to work correctly with SMP Jason Wessel
@ 2012-03-29 22:49 ` Jason Wessel
2012-03-29 22:49 ` [PATCH 5/6] kgdb,debug_core: pass the breakpoint struct instead of address and memory Jason Wessel
2012-03-29 22:49 ` [PATCH 6/6] x86,kgdb: Fix DEBUG_RODATA limitation using text_poke() Jason Wessel
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:49 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
The do_fork and sys_open tests have never worked properly on anything
other than a UP configuration with the kgdb test suite. This is
because the test suite did not fully implement the behavior of a real
debugger. A real debugger tracks the state of what thread it asked to
single step and can correctly continue other threads of execution or
conditionally stop while waiting for the original thread single step
request to return.
Below is a simple method to cause a fatal kernel oops with the kgdb
test suite on a 2 processor ARM system:
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
while [ 1 ] ; do ls > /dev/null 2> /dev/null; done&
echo V1I1F100 > /sys/module/kgdbts/parameters/kgdbts
Very soon after starting the test the kernel will start warning with
messages like:
kgdbts: BP mismatch c002487c expected c0024878
------------[ cut here ]------------
WARNING: at drivers/misc/kgdbts.c:317 check_and_rewind_pc+0x9c/0xc4()
[<c01f6520>] (check_and_rewind_pc+0x9c/0xc4)
[<c01f595c>] (validate_simple_test+0x3c/0xc4)
[<c01f60d4>] (run_simple_test+0x1e8/0x274)
The kernel will eventually recovers, but the test suite has completely
failed to test anything useful.
This patch implements behavior similar to a real debugger that does
not rely on hardware single stepping by using only software planted
breakpoints.
In order to mimic a real debugger, the kgdb test suite now tracks the
most recent thread that was continued (cont_thread_id), with the
intent to single step just this thread. When the response to the
single step request stops in a different thread that hit the original
break point that thread will now get continued, while the debugger
waits for the thread with the single step pending. Here is a high
level description of the sequence of events.
cont_instead_of_sstep = 0;
1) set breakpoint at do_fork
2) continue
3) Save the thread id where we stop to cont_thread_id
4) Remove breakpoint at do_fork
5) Reset the PC if needed depending on kernel exception type
6) soft single step
7) Check where we stopped
if current thread != cont_thread_id {
if (here for more than 2 times for the same thead) {
### must be a really busy system, start test again ###
goto step 1
}
goto step 5
} else {
cont_instead_of_sstep = 0;
}
8) clean up and run test again if needed
9) Clear out any threads that were waiting on a break point at the
point in time the test is ended with get_cont_catch(). This
happens sometimes because breakpoints are used in place of single
stepping and some threads could have been in the debugger exception
handling queue because breakpoints were hit concurrently on
different CPUs. This also means we wait at least one second before
unplumbing the debugger connection at the very end, so as respond
to any debug threads waiting to be serviced.
Cc: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
drivers/misc/kgdbts.c | 73 +++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 62 insertions(+), 11 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 3cad9fc..d087456 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -142,7 +142,9 @@ static int arch_needs_sstep_emulation = 1;
#else
static int arch_needs_sstep_emulation;
#endif
+static unsigned long cont_addr;
static unsigned long sstep_addr;
+static int restart_from_top_after_write;
static int sstep_state;
/* Storage for the registers, in GDB format. */
@@ -190,7 +192,8 @@ static int kgdbts_unreg_thread(void *ptr)
*/
while (!final_ack)
msleep_interruptible(1500);
-
+ /* Pause for any other threads to exit after final ack. */
+ msleep_interruptible(1000);
if (configured)
kgdb_unregister_io_module(&kgdbts_io_ops);
configured = 0;
@@ -312,13 +315,21 @@ static int check_and_rewind_pc(char *put_str, char *arg)
if (addr + BREAK_INSTR_SIZE == ip)
offset = -BREAK_INSTR_SIZE;
#endif
- if (strcmp(arg, "silent") && ip + offset != addr) {
+
+ if (arch_needs_sstep_emulation && sstep_addr &&
+ ip + offset == sstep_addr &&
+ ((!strcmp(arg, "sys_open") || !strcmp(arg, "do_fork")))) {
+ /* This is special case for emulated single step */
+ v2printk("Emul: rewind hit single step bp\n");
+ restart_from_top_after_write = 1;
+ } else if (strcmp(arg, "silent") && ip + offset != addr) {
eprintk("kgdbts: BP mismatch %lx expected %lx\n",
ip + offset, addr);
return 1;
}
/* Readjust the instruction pointer if needed */
ip += offset;
+ cont_addr = ip;
#ifdef GDB_ADJUSTS_BREAK_OFFSET
instruction_pointer_set(&kgdbts_regs, ip);
#endif
@@ -328,6 +339,8 @@ static int check_and_rewind_pc(char *put_str, char *arg)
static int check_single_step(char *put_str, char *arg)
{
unsigned long addr = lookup_addr(arg);
+ static int matched_id;
+
/*
* From an arch indepent point of view the instruction pointer
* should be on a different instruction
@@ -338,17 +351,28 @@ static int check_single_step(char *put_str, char *arg)
v2printk("Singlestep stopped at IP: %lx\n",
instruction_pointer(&kgdbts_regs));
- if (sstep_thread_id != cont_thread_id && !arch_needs_sstep_emulation) {
+ if (sstep_thread_id != cont_thread_id) {
/*
* Ensure we stopped in the same thread id as before, else the
* debugger should continue until the original thread that was
* single stepped is scheduled again, emulating gdb's behavior.
*/
v2printk("ThrID does not match: %lx\n", cont_thread_id);
+ if (arch_needs_sstep_emulation) {
+ if (matched_id &&
+ instruction_pointer(&kgdbts_regs) != addr)
+ goto continue_test;
+ matched_id++;
+ ts.idx -= 2;
+ sstep_state = 0;
+ return 0;
+ }
cont_instead_of_sstep = 1;
ts.idx -= 4;
return 0;
}
+continue_test:
+ matched_id = 0;
if (instruction_pointer(&kgdbts_regs) == addr) {
eprintk("kgdbts: SingleStep failed at %lx\n",
instruction_pointer(&kgdbts_regs));
@@ -390,6 +414,31 @@ static int got_break(char *put_str, char *arg)
return 1;
}
+static void get_cont_catch(char *arg)
+{
+ /* Always send detach because the test is completed at this point */
+ fill_get_buf("D");
+}
+
+static int put_cont_catch(char *put_str, char *arg)
+{
+ /* This is at the end of the test and we catch any and all input */
+ v2printk("kgdbts: cleanup task: %lx\n", sstep_thread_id);
+ ts.idx--;
+ return 0;
+}
+
+static int emul_reset(char *put_str, char *arg)
+{
+ if (strncmp(put_str, "$OK", 3))
+ return 1;
+ if (restart_from_top_after_write) {
+ restart_from_top_after_write = 0;
+ ts.idx = -1;
+ }
+ return 0;
+}
+
static void emul_sstep_get(char *arg)
{
if (!arch_needs_sstep_emulation) {
@@ -443,8 +492,7 @@ static int emul_sstep_put(char *put_str, char *arg)
v2printk("Stopped at IP: %lx\n",
instruction_pointer(&kgdbts_regs));
/* Want to stop at IP + break instruction size by default */
- sstep_addr = instruction_pointer(&kgdbts_regs) +
- BREAK_INSTR_SIZE;
+ sstep_addr = cont_addr + BREAK_INSTR_SIZE;
break;
case 2:
if (strncmp(put_str, "$OK", 3)) {
@@ -456,6 +504,9 @@ static int emul_sstep_put(char *put_str, char *arg)
if (strncmp(put_str, "$T0", 3)) {
eprintk("kgdbts: failed continue sstep\n");
return 1;
+ } else {
+ char *ptr = &put_str[11];
+ kgdb_hex2long(&ptr, &sstep_thread_id);
}
break;
case 4:
@@ -558,13 +609,13 @@ static struct test_struct do_fork_test[] = {
{ "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
{ "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
{ "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
- { "write", "OK", write_regs }, /* Write registers */
+ { "write", "OK", write_regs, emul_reset }, /* Write registers */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
{ "g", "do_fork", NULL, check_single_step },
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
- { "", "" },
+ { "", "", get_cont_catch, put_cont_catch },
};
/* Test for hitting a breakpoint at sys_open for what ever the number
@@ -576,13 +627,13 @@ static struct test_struct sys_open_test[] = {
{ "c", "T0*", NULL, get_thread_id_continue }, /* Continue */
{ "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
{ "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
- { "write", "OK", write_regs }, /* Write registers */
+ { "write", "OK", write_regs, emul_reset }, /* Write registers */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
{ "g", "sys_open", NULL, check_single_step },
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
- { "", "" },
+ { "", "", get_cont_catch, put_cont_catch },
};
/*
@@ -725,8 +776,8 @@ static int run_simple_test(int is_get_char, int chr)
/* This callback is a put char which is when kgdb sends data to
* this I/O module.
*/
- if (ts.tst[ts.idx].get[0] == '\0' &&
- ts.tst[ts.idx].put[0] == '\0') {
+ if (ts.tst[ts.idx].get[0] == '\0' && ts.tst[ts.idx].put[0] == '\0' &&
+ !ts.tst[ts.idx].get_handler) {
eprintk("kgdbts: ERROR: beyond end of test on"
" '%s' line %i\n", ts.name, ts.idx);
return 0;
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 5/6] kgdb,debug_core: pass the breakpoint struct instead of address and memory
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
` (3 preceding siblings ...)
2012-03-29 22:49 ` [PATCH 4/6] kgdbts: (2 " Jason Wessel
@ 2012-03-29 22:49 ` Jason Wessel
2012-03-29 22:49 ` [PATCH 6/6] x86,kgdb: Fix DEBUG_RODATA limitation using text_poke() Jason Wessel
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:49 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
There is extra state information that needs to be exposed in the
kgdb_bpt structure for tracking how a breakpoint was installed. The
debug_core only uses the the probe_kernel_write() to install
breakpoints, but this is not enough for all the archs. Some arch such
as x86 need to use text_poke() in order to install a breakpoint into a
read only page.
Passing the kgdb_bpt structure to kgdb_arch_set_breakpoint() and
kgdb_arch_remove_breakpoint() allows other archs to set the type
variable which indicates how the breakpoint was installed.
Cc: stable@vger.kernel.org # >= 2.6.36
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
include/linux/kgdb.h | 4 ++--
kernel/debug/debug_core.c | 53 ++++++++++++++++++++-------------------------
2 files changed, 26 insertions(+), 31 deletions(-)
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index fa39183..e5d689c 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -207,8 +207,8 @@ extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc);
/* Optional functions. */
extern int kgdb_validate_break_address(unsigned long addr);
-extern int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr);
-extern int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle);
+extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
+extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
/**
* kgdb_arch_late - Perform any architecture specific initalization.
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 3f88a45..a7e52ca 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -161,37 +161,39 @@ early_param("nokgdbroundup", opt_nokgdbroundup);
* Weak aliases for breakpoint management,
* can be overriden by architectures when needed:
*/
-int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
+int __weak kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
{
int err;
- err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE);
+ err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
+ BREAK_INSTR_SIZE);
if (err)
return err;
-
- return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
- BREAK_INSTR_SIZE);
+ err = probe_kernel_write((char *)bpt->bpt_addr,
+ arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
+ return err;
}
-int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
+int __weak kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
{
- return probe_kernel_write((char *)addr,
- (char *)bundle, BREAK_INSTR_SIZE);
+ return probe_kernel_write((char *)bpt->bpt_addr,
+ (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
}
int __weak kgdb_validate_break_address(unsigned long addr)
{
- char tmp_variable[BREAK_INSTR_SIZE];
+ struct kgdb_bkpt tmp;
int err;
- /* Validate setting the breakpoint and then removing it. In the
+ /* Validate setting the breakpoint and then removing it. If the
* remove fails, the kernel needs to emit a bad message because we
* are deep trouble not being able to put things back the way we
* found them.
*/
- err = kgdb_arch_set_breakpoint(addr, tmp_variable);
+ tmp.bpt_addr = addr;
+ err = kgdb_arch_set_breakpoint(&tmp);
if (err)
return err;
- err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
+ err = kgdb_arch_remove_breakpoint(&tmp);
if (err)
printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
"memory destroyed at: %lx", addr);
@@ -235,7 +237,6 @@ static void kgdb_flush_swbreak_addr(unsigned long addr)
*/
int dbg_activate_sw_breakpoints(void)
{
- unsigned long addr;
int error;
int ret = 0;
int i;
@@ -244,16 +245,15 @@ int dbg_activate_sw_breakpoints(void)
if (kgdb_break[i].state != BP_SET)
continue;
- addr = kgdb_break[i].bpt_addr;
- error = kgdb_arch_set_breakpoint(addr,
- kgdb_break[i].saved_instr);
+ error = kgdb_arch_set_breakpoint(&kgdb_break[i]);
if (error) {
ret = error;
- printk(KERN_INFO "KGDB: BP install failed: %lx", addr);
+ printk(KERN_INFO "KGDB: BP install failed: %lx",
+ kgdb_break[i].bpt_addr);
continue;
}
- kgdb_flush_swbreak_addr(addr);
+ kgdb_flush_swbreak_addr(kgdb_break[i].bpt_addr);
kgdb_break[i].state = BP_ACTIVE;
}
return ret;
@@ -302,7 +302,6 @@ int dbg_set_sw_break(unsigned long addr)
int dbg_deactivate_sw_breakpoints(void)
{
- unsigned long addr;
int error;
int ret = 0;
int i;
@@ -310,15 +309,14 @@ int dbg_deactivate_sw_breakpoints(void)
for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
if (kgdb_break[i].state != BP_ACTIVE)
continue;
- addr = kgdb_break[i].bpt_addr;
- error = kgdb_arch_remove_breakpoint(addr,
- kgdb_break[i].saved_instr);
+ error = kgdb_arch_remove_breakpoint(&kgdb_break[i]);
if (error) {
- printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr);
+ printk(KERN_INFO "KGDB: BP remove failed: %lx\n",
+ kgdb_break[i].bpt_addr);
ret = error;
}
- kgdb_flush_swbreak_addr(addr);
+ kgdb_flush_swbreak_addr(kgdb_break[i].bpt_addr);
kgdb_break[i].state = BP_SET;
}
return ret;
@@ -352,7 +350,6 @@ int kgdb_isremovedbreak(unsigned long addr)
int dbg_remove_all_break(void)
{
- unsigned long addr;
int error;
int i;
@@ -360,12 +357,10 @@ int dbg_remove_all_break(void)
for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
if (kgdb_break[i].state != BP_ACTIVE)
goto setundefined;
- addr = kgdb_break[i].bpt_addr;
- error = kgdb_arch_remove_breakpoint(addr,
- kgdb_break[i].saved_instr);
+ error = kgdb_arch_remove_breakpoint(&kgdb_break[i]);
if (error)
printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
- addr);
+ kgdb_break[i].bpt_addr);
setundefined:
kgdb_break[i].state = BP_UNDEFINED;
}
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 6/6] x86,kgdb: Fix DEBUG_RODATA limitation using text_poke()
2012-03-29 22:48 [PATCH 0/6] KGDB/KDB/KGDBTS various regression fixes for 2.6.x -> 3.4 Jason Wessel
` (4 preceding siblings ...)
2012-03-29 22:49 ` [PATCH 5/6] kgdb,debug_core: pass the breakpoint struct instead of address and memory Jason Wessel
@ 2012-03-29 22:49 ` Jason Wessel
5 siblings, 0 replies; 7+ messages in thread
From: Jason Wessel @ 2012-03-29 22:49 UTC (permalink / raw)
To: linux-kernel; +Cc: kgdb-bugreport
There has long been a limitation using software breakpoints with a
kernel compiled with CONFIG_DEBUG_RODATA going back to 2.6.26. For
this particular patch, it will apply cleanly and has been tested all
the way back to 2.6.36.
The kprobes code uses the text_poke() function which accommodates
writing a breakpoint into a read-only page. The x86 kgdb code can
solve the problem similarly by overriding the default breakpoint
set/remove routines and using text_poke() directly.
The x86 kgdb code will first attempt to use the traditional
probe_kernel_write(), and next try using a the text_poke() function.
The break point install method is tracked such that the correct break
point removal routine will get called later on.
Cc: x86@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # >= 2.6.36
Inspried-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/x86/kernel/kgdb.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/kgdb.h | 3 ++-
2 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index fdc37b3..b9bd9d8 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -43,6 +43,8 @@
#include <linux/smp.h>
#include <linux/nmi.h>
#include <linux/hw_breakpoint.h>
+#include <linux/uaccess.h>
+#include <linux/memory.h>
#include <asm/debugreg.h>
#include <asm/apicdef.h>
@@ -742,6 +744,64 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
regs->ip = ip;
}
+int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
+{
+ int err;
+ char opc[BREAK_INSTR_SIZE];
+
+ bpt->type = BP_BREAKPOINT;
+ err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
+ BREAK_INSTR_SIZE);
+ if (err)
+ return err;
+ err = probe_kernel_write((char *)bpt->bpt_addr,
+ arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
+#ifdef CONFIG_DEBUG_RODATA
+ if (!err)
+ return err;
+ /*
+ * It is safe to call text_poke() because normal kernel execution
+ * is stopped on all cores, so long as the text_mutex is not locked.
+ */
+ if (mutex_is_locked(&text_mutex))
+ return -EBUSY;
+ text_poke((void *)bpt->bpt_addr, arch_kgdb_ops.gdb_bpt_instr,
+ BREAK_INSTR_SIZE);
+ err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
+ if (err)
+ return err;
+ if (memcmp(opc, arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE))
+ return -EINVAL;
+ bpt->type = BP_POKE_BREAKPOINT;
+#endif /* CONFIG_DEBUG_RODATA */
+ return err;
+}
+
+int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
+{
+#ifdef CONFIG_DEBUG_RODATA
+ int err;
+ char opc[BREAK_INSTR_SIZE];
+
+ if (bpt->type != BP_POKE_BREAKPOINT)
+ goto knl_write;
+ /*
+ * It is safe to call text_poke() because normal kernel execution
+ * is stopped on all cores, so long as the text_mutex is not locked.
+ */
+ if (mutex_is_locked(&text_mutex))
+ goto knl_write;
+ text_poke((void *)bpt->bpt_addr, bpt->saved_instr, BREAK_INSTR_SIZE);
+ err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
+ if (err || memcmp(opc, bpt->saved_instr, BREAK_INSTR_SIZE))
+ goto knl_write;
+ return err;
+knl_write:
+#endif /* CONFIG_DEBUG_RODATA */
+ return probe_kernel_write((char *)bpt->bpt_addr,
+ (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
+}
+
struct kgdb_arch arch_kgdb_ops = {
/* Breakpoint instruction: */
.gdb_bpt_instr = { 0xcc },
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index e5d689c..c4d2fc1 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -63,7 +63,8 @@ enum kgdb_bptype {
BP_HARDWARE_BREAKPOINT,
BP_WRITE_WATCHPOINT,
BP_READ_WATCHPOINT,
- BP_ACCESS_WATCHPOINT
+ BP_ACCESS_WATCHPOINT,
+ BP_POKE_BREAKPOINT,
};
enum kgdb_bpstate {
--
1.7.9.4
^ permalink raw reply [flat|nested] 7+ messages in thread