mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Keerthy <j-keerthy@ti.com>
To: <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <khilman@ti.com>,
	<rjw@sisk.pl>, <linux-kernel@vger.kernel.org>,
	<linux-pm@lists.linux-foundation.org>
Cc: <j-pihet@ti.com>, <j-keerthy@ti.com>,
	Paul Walmsley <paul@pwsan.com>, Thara Gopinath <thara@ti.com>,
	Nishanth Menon <nm@ti.com>
Subject: [PATCH V3 02/10] ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr *
Date: Thu, 26 Apr 2012 23:10:33 +0530	[thread overview]
Message-ID: <1335462041-4949-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1335462041-4949-1-git-send-email-j-keerthy@ti.com>

From: Jean Pihet <j-pihet@ti.com>

Convert SmartReflex "class" functions to take a struct omap_sr *, rather than
a struct voltagedomain *.  SmartReflex code should be driver code and not
tightly coupled to OMAP subarchitecture-specific structures.

Based on Paul's original code for the SmartReflex driver conversion.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Thara Gopinath <thara@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/smartreflex-class3.c |   24 +++++++++---------
 arch/arm/mach-omap2/smartreflex.c        |   37 +++++------------------------
 include/linux/power/smartreflex.h        |   31 +++++++++++++++++++++---
 3 files changed, 46 insertions(+), 46 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index ab8cf83..9381654 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -14,34 +14,34 @@
 #include <linux/power/smartreflex.h>
 #include "voltage.h"
 
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
 {
-	unsigned long volt = voltdm_get_voltage(voltdm);
+	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
 		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
-				__func__, voltdm->name);
+				__func__, sr->voltdm->name);
 		return -ENODATA;
 	}
 
-	omap_vp_enable(voltdm);
-	return sr_enable(voltdm, volt);
+	omap_vp_enable(sr->voltdm);
+	return sr_enable(sr->voltdm, volt);
 }
 
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
 {
-	sr_disable_errgen(voltdm);
-	omap_vp_disable(voltdm);
-	sr_disable(voltdm);
+	sr_disable_errgen(sr->voltdm);
+	omap_vp_disable(sr->voltdm);
+	sr_disable(sr->voltdm);
 	if (is_volt_reset)
-		voltdm_reset(voltdm);
+		voltdm_reset(sr->voltdm);
 
 	return 0;
 }
 
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
 {
-	return sr_configure_errgen(voltdm);
+	return sr_configure_errgen(sr->voltdm);
 }
 
 /* SR class3 structure */
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 98309d3..82bdd28 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -34,29 +34,6 @@
 #define NVALUE_NAME_LEN		40
 #define SR_DISABLE_TIMEOUT	200
 
-struct omap_sr {
-	struct list_head		node;
-	struct platform_device		*pdev;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
-	unsigned int			irq;
-	int				srid;
-	int				ip_type;
-	int				nvalue_count;
-	bool				autocomp_active;
-	u32				clk_length;
-	u32				err_weight;
-	u32				err_minlimit;
-	u32				err_maxlimit;
-	u32				accum_data;
-	u32				senn_avgweight;
-	u32				senp_avgweight;
-	u32				senp_mod;
-	u32				senn_mod;
-	void __iomem			*base;
-};
-
 /* sr_list contains all the instances of smartreflex module */
 static LIST_HEAD(sr_list);
 
@@ -147,7 +124,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
 	}
 
 	if (sr_class->notify)
-		sr_class->notify(sr_info->voltdm, status);
+		sr_class->notify(sr_info, status);
 
 	return IRQ_HANDLED;
 }
@@ -225,7 +202,7 @@ static void sr_start_vddautocomp(struct omap_sr *sr)
 		return;
 	}
 
-	if (!sr_class->enable(sr->voltdm))
+	if (!sr_class->enable(sr))
 		sr->autocomp_active = true;
 }
 
@@ -239,7 +216,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
 	}
 
 	if (sr->autocomp_active) {
-		sr_class->disable(sr->voltdm, 1);
+		sr_class->disable(sr, 1);
 		sr->autocomp_active = false;
 	}
 }
@@ -654,7 +631,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 		return 0;
 
 	/* Configure SR */
-	ret = sr_class->configure(voltdm);
+	ret = sr_class->configure(sr);
 	if (ret)
 		return ret;
 
@@ -772,7 +749,7 @@ void omap_sr_enable(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->enable(voltdm);
+	sr_class->enable(sr);
 }
 
 /**
@@ -805,7 +782,7 @@ void omap_sr_disable(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->disable(voltdm, 0);
+	sr_class->disable(sr, 0);
 }
 
 /**
@@ -838,7 +815,7 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->disable(voltdm, 1);
+	sr_class->disable(sr, 1);
 }
 
 /**
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 69eb270..4224698 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -143,6 +143,29 @@
 #define OMAP3430_SR_ERRWEIGHT		0x04
 #define OMAP3430_SR_ERRMAXLIMIT		0x02
 
+struct omap_sr {
+	struct list_head		node;
+	struct platform_device		*pdev;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+	struct dentry			*dbg_dir;
+	unsigned int			irq;
+	int				srid;
+	int				ip_type;
+	int				nvalue_count;
+	bool				autocomp_active;
+	u32				clk_length;
+	u32				err_weight;
+	u32				err_minlimit;
+	u32				err_maxlimit;
+	u32				accum_data;
+	u32				senn_avgweight;
+	u32				senp_avgweight;
+	u32				senp_mod;
+	u32				senn_mod;
+	void __iomem			*base;
+};
+
 /**
  * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
  *				pmic specific info to smartreflex driver
@@ -187,10 +210,10 @@ struct omap_smartreflex_dev_attr {
  *			based decisions.
  */
 struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
+	int (*enable)(struct omap_sr *sr);
+	int (*disable)(struct omap_sr *sr, int is_volt_reset);
+	int (*configure)(struct omap_sr *sr);
+	int (*notify)(struct omap_sr *sr, u32 status);
 	u8 notify_flags;
 	u8 class_type;
 };
-- 
1.7.5.4


  parent reply	other threads:[~2012-04-26 17:41 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-26 17:40 [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling) Keerthy
2012-04-26 17:40 ` [PATCH V3 01/10] ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power Keerthy
2012-04-26 17:40 ` Keerthy [this message]
2012-04-26 17:40 ` [PATCH V3 03/10] ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains Keerthy
2012-04-26 17:40 ` [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries Keerthy
2012-05-04  8:30   ` AnilKumar, Chimata
2012-05-04 10:11     ` J, KEERTHY
2012-05-07 23:39       ` Kevin Hilman
2012-05-07 23:55         ` Kevin Hilman
2012-05-08  3:44           ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro Keerthy
2012-05-04  9:12   ` AnilKumar, Chimata
2012-05-07  5:21     ` J, KEERTHY
2012-05-08 10:17       ` AnilKumar, Chimata
2012-05-10  6:19         ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 06/10] ARM: OMAP2+: Voltage: Move the omap_volt_data structure to plat Keerthy
2012-04-26 17:40 ` [PATCH V3 07/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure Keerthy
2012-05-10 19:11   ` Guyotte, Greg
2012-05-11  3:51     ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 08/10] ARM: OMAP2+: SmartReflex: Create per-opp debugfs node for errminlimit Keerthy
2012-04-26 17:40 ` [PATCH V3 09/10] ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options Keerthy
2012-04-26 17:40 ` [PATCH V3 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/ Keerthy
2012-04-26 19:11 ` [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling) Mark Brown
2012-04-27  5:39   ` J, KEERTHY
2012-04-27 17:56     ` Mark Brown
2012-04-27 21:01       ` Kevin Hilman
2012-04-30  4:25         ` J, KEERTHY
2012-04-30  9:54         ` Mark Brown
2012-04-30 21:51           ` Kevin Hilman
2012-05-02  5:04             ` J, KEERTHY
2012-05-04  5:05               ` J, KEERTHY
2012-05-04  8:21         ` AnilKumar, Chimata
2012-05-07 23:48           ` Kevin Hilman
2012-05-08  3:48             ` J, KEERTHY
2012-05-08 10:17             ` AnilKumar, Chimata
2012-05-08 20:38               ` Woodruff, Richard
2012-05-08 22:16                 ` [linux-pm] " Kevin Hilman
2012-05-09  0:39                   ` Woodruff, Richard
2012-05-09  8:19                     ` Koen Kooi
2012-05-09 18:29                     ` Kevin Hilman
2012-05-23 13:27                       ` Menon, Nishanth
2012-05-24 23:16                         ` Kevin Hilman
2012-05-07 23:51 ` Kevin Hilman
2012-05-15  5:46   ` J, KEERTHY
2012-05-23  4:51     ` J, KEERTHY
2012-05-24 17:24       ` Kevin Hilman
2012-05-31 22:40         ` Kevin Hilman
2012-06-01  3:45           ` J, KEERTHY

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1335462041-4949-3-git-send-email-j-keerthy@ti.com \
    --to=j-keerthy@ti.com \
    --cc=j-pihet@ti.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=nm@ti.com \
    --cc=paul@pwsan.com \
    --cc=rjw@sisk.pl \
    --cc=thara@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®