From: Keerthy <j-keerthy@ti.com>
To: <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <khilman@ti.com>,
<rjw@sisk.pl>, <linux-kernel@vger.kernel.org>,
<linux-pm@lists.linux-foundation.org>
Cc: <j-pihet@ti.com>, <j-keerthy@ti.com>
Subject: [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries
Date: Thu, 26 Apr 2012 23:10:35 +0530 [thread overview]
Message-ID: <1335462041-4949-5-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1335462041-4949-1-git-send-email-j-keerthy@ti.com>
From: Jean Pihet <j-pihet@ti.com>
Change the name field value to better reflect the smartreflex
integration in the system.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 8 ++++----
arch/arm/mach-omap2/smartreflex.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 144d118..15907b0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1324,7 +1324,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1342,7 +1342,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
};
static struct omap_hwmod omap36xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1369,7 +1369,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
@@ -1387,7 +1387,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
};
static struct omap_hwmod omap36xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 2edd1e2..d859277 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -183,7 +183,7 @@ static void sr_set_regfields(struct omap_sr *sr)
sr->err_weight = OMAP3430_SR_ERRWEIGHT;
sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr->accum_data = OMAP3430_SR_ACCUMDATA;
- if (!(strcmp(sr->name, "sr1"))) {
+ if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
--
1.7.5.4
next prev parent reply other threads:[~2012-04-26 17:41 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 17:40 [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling) Keerthy
2012-04-26 17:40 ` [PATCH V3 01/10] ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power Keerthy
2012-04-26 17:40 ` [PATCH V3 02/10] ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr * Keerthy
2012-04-26 17:40 ` [PATCH V3 03/10] ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains Keerthy
2012-04-26 17:40 ` Keerthy [this message]
2012-05-04 8:30 ` [PATCH V3 04/10] ARM: OMAP3: hwmod: rename the smartreflex entries AnilKumar, Chimata
2012-05-04 10:11 ` J, KEERTHY
2012-05-07 23:39 ` Kevin Hilman
2012-05-07 23:55 ` Kevin Hilman
2012-05-08 3:44 ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 05/10] ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro Keerthy
2012-05-04 9:12 ` AnilKumar, Chimata
2012-05-07 5:21 ` J, KEERTHY
2012-05-08 10:17 ` AnilKumar, Chimata
2012-05-10 6:19 ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 06/10] ARM: OMAP2+: Voltage: Move the omap_volt_data structure to plat Keerthy
2012-04-26 17:40 ` [PATCH V3 07/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure Keerthy
2012-05-10 19:11 ` Guyotte, Greg
2012-05-11 3:51 ` J, KEERTHY
2012-04-26 17:40 ` [PATCH V3 08/10] ARM: OMAP2+: SmartReflex: Create per-opp debugfs node for errminlimit Keerthy
2012-04-26 17:40 ` [PATCH V3 09/10] ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options Keerthy
2012-04-26 17:40 ` [PATCH V3 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/ Keerthy
2012-04-26 19:11 ` [PATCH V3 00/10] PM: Create the AVS(Adaptive Voltage Scaling) Mark Brown
2012-04-27 5:39 ` J, KEERTHY
2012-04-27 17:56 ` Mark Brown
2012-04-27 21:01 ` Kevin Hilman
2012-04-30 4:25 ` J, KEERTHY
2012-04-30 9:54 ` Mark Brown
2012-04-30 21:51 ` Kevin Hilman
2012-05-02 5:04 ` J, KEERTHY
2012-05-04 5:05 ` J, KEERTHY
2012-05-04 8:21 ` AnilKumar, Chimata
2012-05-07 23:48 ` Kevin Hilman
2012-05-08 3:48 ` J, KEERTHY
2012-05-08 10:17 ` AnilKumar, Chimata
2012-05-08 20:38 ` Woodruff, Richard
2012-05-08 22:16 ` [linux-pm] " Kevin Hilman
2012-05-09 0:39 ` Woodruff, Richard
2012-05-09 8:19 ` Koen Kooi
2012-05-09 18:29 ` Kevin Hilman
2012-05-23 13:27 ` Menon, Nishanth
2012-05-24 23:16 ` Kevin Hilman
2012-05-07 23:51 ` Kevin Hilman
2012-05-15 5:46 ` J, KEERTHY
2012-05-23 4:51 ` J, KEERTHY
2012-05-24 17:24 ` Kevin Hilman
2012-05-31 22:40 ` Kevin Hilman
2012-06-01 3:45 ` J, KEERTHY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335462041-4949-5-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=j-pihet@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®