* [PATCH] USB: Staging: media: lirc: initialize spinlocks before usage
@ 2012-05-26 19:25 Sasha Levin
2012-06-10 12:17 ` Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: Sasha Levin @ 2012-05-26 19:25 UTC (permalink / raw)
To: jarod, mchehab, gregkh; +Cc: linux-media, devel, linux-kernel, Sasha Levin
Initialize the spinlock for each hardware time.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
---
drivers/staging/media/lirc/lirc_serial.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 3295ea6..97ef670 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -129,6 +129,7 @@ static void send_space_homebrew(long length);
static struct lirc_serial hardware[] = {
[LIRC_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -145,6 +146,7 @@ static struct lirc_serial hardware[] = {
},
[LIRC_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = UART_MCR_OUT2,
@@ -156,6 +158,7 @@ static struct lirc_serial hardware[] = {
},
[LIRC_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
@@ -167,6 +170,7 @@ static struct lirc_serial hardware[] = {
},
[LIRC_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = 0,
@@ -177,6 +181,7 @@ static struct lirc_serial hardware[] = {
},
[LIRC_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -201,6 +206,7 @@ static struct lirc_serial hardware[] = {
* See also http://www.nslu2-linux.org for this device
*/
[LIRC_NSLU2] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
.signal_pin = UART_MSR_CTS,
.signal_pin_change = UART_MSR_DCTS,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
--
1.7.8.6
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] USB: Staging: media: lirc: initialize spinlocks before usage
2012-05-26 19:25 [PATCH] USB: Staging: media: lirc: initialize spinlocks before usage Sasha Levin
@ 2012-06-10 12:17 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2012-06-10 12:17 UTC (permalink / raw)
To: jarod, mchehab, gregkh; +Cc: linux-media, devel, linux-kernel, Sasha Levin
Ping? This thing still causes spinlock errors in 3.5-rc2.
On Sat, May 26, 2012 at 9:25 PM, Sasha Levin <levinsasha928@gmail.com> wrote:
> Initialize the spinlock for each hardware time.
>
> Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
> ---
> drivers/staging/media/lirc/lirc_serial.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
> index 3295ea6..97ef670 100644
> --- a/drivers/staging/media/lirc/lirc_serial.c
> +++ b/drivers/staging/media/lirc/lirc_serial.c
> @@ -129,6 +129,7 @@ static void send_space_homebrew(long length);
>
> static struct lirc_serial hardware[] = {
> [LIRC_HOMEBREW] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
> .signal_pin = UART_MSR_DCD,
> .signal_pin_change = UART_MSR_DDCD,
> .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
> @@ -145,6 +146,7 @@ static struct lirc_serial hardware[] = {
> },
>
> [LIRC_IRDEO] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
> .signal_pin = UART_MSR_DSR,
> .signal_pin_change = UART_MSR_DDSR,
> .on = UART_MCR_OUT2,
> @@ -156,6 +158,7 @@ static struct lirc_serial hardware[] = {
> },
>
> [LIRC_IRDEO_REMOTE] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
> .signal_pin = UART_MSR_DSR,
> .signal_pin_change = UART_MSR_DDSR,
> .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
> @@ -167,6 +170,7 @@ static struct lirc_serial hardware[] = {
> },
>
> [LIRC_ANIMAX] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
> .signal_pin = UART_MSR_DCD,
> .signal_pin_change = UART_MSR_DDCD,
> .on = 0,
> @@ -177,6 +181,7 @@ static struct lirc_serial hardware[] = {
> },
>
> [LIRC_IGOR] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
> .signal_pin = UART_MSR_DSR,
> .signal_pin_change = UART_MSR_DDSR,
> .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
> @@ -201,6 +206,7 @@ static struct lirc_serial hardware[] = {
> * See also http://www.nslu2-linux.org for this device
> */
> [LIRC_NSLU2] = {
> + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
> .signal_pin = UART_MSR_CTS,
> .signal_pin_change = UART_MSR_DCTS,
> .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
> --
> 1.7.8.6
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-06-10 12:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-26 19:25 [PATCH] USB: Staging: media: lirc: initialize spinlocks before usage Sasha Levin
2012-06-10 12:17 ` Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®