From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: mingo@elte.hu, laijs@cn.fujitsu.com, dipankar@in.ibm.com,
akpm@linux-foundation.org, mathieu.desnoyers@polymtl.ca,
josh@joshtriplett.org, niv@us.ibm.com, tglx@linutronix.de,
peterz@infradead.org, rostedt@goodmis.org,
Valdis.Kletnieks@vt.edu, dhowells@redhat.com,
eric.dumazet@gmail.com, darren@dvhart.com, fweisbec@gmail.com,
patches@linaro.org, "Paul E. McKenney" <paul.mckenney@linaro.org>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH tip/core/rcu 10/15] rcu: Add tracing for _rcu_barrier()
Date: Fri, 15 Jun 2012 14:06:05 -0700 [thread overview]
Message-ID: <1339794370-28119-10-git-send-email-paulmck@linux.vnet.ibm.com> (raw)
In-Reply-To: <1339794370-28119-1-git-send-email-paulmck@linux.vnet.ibm.com>
From: "Paul E. McKenney" <paul.mckenney@linaro.org>
This commit adds event tracing for _rcu_barrier() execution. This
is defined only if RCU_TRACE=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
include/trace/events/rcu.h | 45 ++++++++++++++++++++++++++++++++++++++++++++
kernel/rcutree.c | 29 +++++++++++++++++++++++++++-
2 files changed, 73 insertions(+), 1 deletions(-)
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index 1480900..cd63f79 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -540,6 +540,50 @@ TRACE_EVENT(rcu_torture_read,
__entry->rcutorturename, __entry->rhp)
);
+/*
+ * Tracepoint for _rcu_barrier() execution. The string "s" describes
+ * the _rcu_barrier phase:
+ * "Begin": rcu_barrier_callback() started.
+ * "Check": rcu_barrier_callback() checking for piggybacking.
+ * "EarlyExit": rcu_barrier_callback() piggybacked, thus early exit.
+ * "Inc1": rcu_barrier_callback() piggyback check counter incremented.
+ * "Offline": rcu_barrier_callback() found offline CPU
+ * "OnlineQ": rcu_barrier_callback() found online CPU with callbacks.
+ * "OnlineNQ": rcu_barrier_callback() found online CPU, no callbacks.
+ * "IRQ": An rcu_barrier_callback() callback posted on remote CPU.
+ * "CB": An rcu_barrier_callback() invoked a callback, not the last.
+ * "LastCB": An rcu_barrier_callback() invoked the last callback.
+ * "Inc2": rcu_barrier_callback() piggyback check counter incremented.
+ * The "cpu" argument is the CPU or -1 if meaningless, the "cnt" argument
+ * is the count of remaining callbacks, and "done" is the piggybacking count.
+ */
+TRACE_EVENT(rcu_barrier,
+
+ TP_PROTO(char *rcuname, char *s, int cpu, int cnt, unsigned long done),
+
+ TP_ARGS(rcuname, s, cpu, cnt, done),
+
+ TP_STRUCT__entry(
+ __field(char *, rcuname)
+ __field(char *, s)
+ __field(int, cpu)
+ __field(int, cnt)
+ __field(unsigned long, done)
+ ),
+
+ TP_fast_assign(
+ __entry->rcuname = rcuname;
+ __entry->s = s;
+ __entry->cpu = cpu;
+ __entry->cnt = cnt;
+ __entry->done = done;
+ ),
+
+ TP_printk("%s %s cpu %d remaining %d # %lu",
+ __entry->rcuname, __entry->s, __entry->cpu, __entry->cnt,
+ __entry->done)
+);
+
#else /* #ifdef CONFIG_RCU_TRACE */
#define trace_rcu_grace_period(rcuname, gpnum, gpevent) do { } while (0)
@@ -563,6 +607,7 @@ TRACE_EVENT(rcu_torture_read,
#define trace_rcu_batch_end(rcuname, callbacks_invoked, cb, nr, iit, risk) \
do { } while (0)
#define trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#define trace_rcu_barrier(name, s, cpu, cnt, done) do { } while (0)
#endif /* #else #ifdef CONFIG_RCU_TRACE */
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7c299d3..ebd5223 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -2257,6 +2257,17 @@ static int rcu_cpu_has_callbacks(int cpu)
}
/*
+ * Helper function for _rcu_barrier() tracing. If tracing is disabled,
+ * the compiler is expected to optimize this away.
+ */
+static void _rcu_barrier_trace(struct rcu_state *rsp, char *s,
+ int cpu, unsigned long done)
+{
+ trace_rcu_barrier(rsp->name, s, cpu,
+ atomic_read(&rsp->barrier_cpu_count), done);
+}
+
+/*
* RCU callback function for _rcu_barrier(). If we are last, wake
* up the task executing _rcu_barrier().
*/
@@ -2265,8 +2276,12 @@ static void rcu_barrier_callback(struct rcu_head *rhp)
struct rcu_data *rdp = container_of(rhp, struct rcu_data, barrier_head);
struct rcu_state *rsp = rdp->rsp;
- if (atomic_dec_and_test(&rsp->barrier_cpu_count))
+ if (atomic_dec_and_test(&rsp->barrier_cpu_count)) {
+ _rcu_barrier_trace(rsp, "LastCB", -1, rsp->n_barrier_done);
complete(&rsp->barrier_completion);
+ } else {
+ _rcu_barrier_trace(rsp, "CB", -1, rsp->n_barrier_done);
+ }
}
/*
@@ -2277,6 +2292,7 @@ static void rcu_barrier_func(void *type)
struct rcu_state *rsp = type;
struct rcu_data *rdp = __this_cpu_ptr(rsp->rda);
+ _rcu_barrier_trace(rsp, "IRQ", -1, rsp->n_barrier_done);
atomic_inc(&rsp->barrier_cpu_count);
rsp->call(&rdp->barrier_head, rcu_barrier_callback);
}
@@ -2295,6 +2311,7 @@ static void _rcu_barrier(struct rcu_state *rsp)
unsigned long snap_done;
init_rcu_head_on_stack(&rd.barrier_head);
+ _rcu_barrier_trace(rsp, "Begin", -1, snap);
/* Take mutex to serialize concurrent rcu_barrier() requests. */
mutex_lock(&rsp->barrier_mutex);
@@ -2307,7 +2324,9 @@ static void _rcu_barrier(struct rcu_state *rsp)
/* Recheck ->n_barrier_done to see if others did our work for us. */
snap_done = ACCESS_ONCE(rsp->n_barrier_done);
+ _rcu_barrier_trace(rsp, "Check", -1, snap_done);
if (ULONG_CMP_GE(snap_done, ((snap + 1) & ~0x1) + 2)) {
+ _rcu_barrier_trace(rsp, "EarlyExit", -1, snap_done);
smp_mb();
mutex_unlock(&rsp->barrier_mutex);
return;
@@ -2316,6 +2335,7 @@ static void _rcu_barrier(struct rcu_state *rsp)
/* Increment ->n_barrier_done to avoid duplicate work. */
ACCESS_ONCE(rsp->n_barrier_done)++;
WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 1);
+ _rcu_barrier_trace(rsp, "Inc1", -1, rsp->n_barrier_done);
smp_mb(); /* Order ->n_barrier_done increment with below mechanism. */
/*
@@ -2352,13 +2372,19 @@ static void _rcu_barrier(struct rcu_state *rsp)
preempt_disable();
rdp = per_cpu_ptr(rsp->rda, cpu);
if (cpu_is_offline(cpu)) {
+ _rcu_barrier_trace(rsp, "Offline", cpu,
+ rsp->n_barrier_done);
preempt_enable();
while (cpu_is_offline(cpu) && ACCESS_ONCE(rdp->qlen))
schedule_timeout_interruptible(1);
} else if (ACCESS_ONCE(rdp->qlen)) {
+ _rcu_barrier_trace(rsp, "OnlineQ", cpu,
+ rsp->n_barrier_done);
smp_call_function_single(cpu, rcu_barrier_func, rsp, 1);
preempt_enable();
} else {
+ _rcu_barrier_trace(rsp, "OnlineNQ", cpu,
+ rsp->n_barrier_done);
preempt_enable();
}
}
@@ -2391,6 +2417,7 @@ static void _rcu_barrier(struct rcu_state *rsp)
smp_mb(); /* Keep increment after above mechanism. */
ACCESS_ONCE(rsp->n_barrier_done)++;
WARN_ON_ONCE((rsp->n_barrier_done & 0x1) != 0);
+ _rcu_barrier_trace(rsp, "Inc2", -1, rsp->n_barrier_done);
smp_mb(); /* Keep increment before caller's subsequent code. */
/* Wait for all rcu_barrier_callback() callbacks to be invoked. */
--
1.7.8
next prev parent reply other threads:[~2012-06-15 21:07 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-15 21:05 [PATCH tip/core/rcu 0/15] Improvements to rcu_barrier() and RT response on big systems Paul E. McKenney
2012-06-15 21:05 ` [PATCH tip/core/rcu 01/15] rcu: Control RCU_FANOUT_LEAF from boot-time parameter Paul E. McKenney
2012-06-15 21:05 ` [PATCH tip/core/rcu 02/15] rcu: Size rcu_node tree from nr_cpu_ids rather than NR_CPUS Paul E. McKenney
2012-06-15 21:47 ` Josh Triplett
2012-06-16 0:37 ` Paul E. McKenney
2012-06-16 5:17 ` Josh Triplett
2012-06-16 6:38 ` Paul E. McKenney
2012-06-16 9:17 ` Josh Triplett
2012-06-16 14:44 ` Paul E. McKenney
2012-06-16 14:51 ` Paul E. McKenney
2012-06-16 20:31 ` Josh Triplett
2012-06-15 21:05 ` [PATCH tip/core/rcu 03/15] rcu: Prevent excessive line length in RCU_STATE_INITIALIZER() Paul E. McKenney
2012-06-15 21:48 ` Josh Triplett
2012-06-15 21:05 ` [PATCH tip/core/rcu 04/15] rcu: Place pointer to call_rcu() in rcu_data structure Paul E. McKenney
2012-06-15 22:08 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 05/15] rcu: Move _rcu_barrier()'s rcu_head structures to rcu_data structures Paul E. McKenney
2012-06-15 22:19 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 06/15] rcu: Move rcu_barrier_cpu_count to rcu_state structure Paul E. McKenney
2012-06-15 22:44 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 07/15] rcu: Move rcu_barrier_completion " Paul E. McKenney
2012-06-15 22:51 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 08/15] rcu: Move rcu_barrier_mutex " Paul E. McKenney
2012-06-15 22:55 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 09/15] rcu: Increasing rcu_barrier() concurrency Paul E. McKenney
2012-06-15 23:31 ` Josh Triplett
2012-06-16 0:21 ` Steven Rostedt
2012-06-16 0:49 ` Paul E. McKenney
2012-06-16 0:48 ` Paul E. McKenney
2012-06-15 21:06 ` Paul E. McKenney [this message]
2012-06-15 23:35 ` [PATCH tip/core/rcu 10/15] rcu: Add tracing for _rcu_barrier() Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 11/15] rcu: Add rcu_barrier() statistics to debugfs tracing Paul E. McKenney
2012-06-15 23:38 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 12/15] rcu: Remove unneeded __rcu_process_callbacks() argument Paul E. McKenney
2012-06-15 23:37 ` Josh Triplett
2012-06-15 21:06 ` [PATCH tip/core/rcu 13/15] rcu: Introduce for_each_rcu_flavor() and use it Paul E. McKenney
2012-06-15 23:52 ` Josh Triplett
2012-06-16 1:01 ` Paul E. McKenney
2012-06-16 5:35 ` Josh Triplett
2012-06-16 6:36 ` Paul E. McKenney
2012-06-15 21:06 ` [PATCH tip/core/rcu 14/15] rcu: Use for_each_rcu_flavor() in TREE_RCU tracing Paul E. McKenney
2012-06-15 23:59 ` Josh Triplett
2012-06-16 0:56 ` Paul E. McKenney
2012-06-16 5:22 ` Josh Triplett
2012-06-16 6:42 ` Paul E. McKenney
2012-06-15 21:06 ` [PATCH tip/core/rcu 15/15] rcu: RCU_SAVE_DYNTICK code no longer ever dead Paul E. McKenney
2012-06-16 0:02 ` Josh Triplett
2012-06-16 0:04 ` Josh Triplett
2012-06-16 1:04 ` Paul E. McKenney
2012-06-15 21:43 ` [PATCH tip/core/rcu 01/15] rcu: Control RCU_FANOUT_LEAF from boot-time parameter Josh Triplett
2012-06-15 22:10 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339794370-28119-10-git-send-email-paulmck@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=Valdis.Kletnieks@vt.edu \
--cc=akpm@linux-foundation.org \
--cc=darren@dvhart.com \
--cc=dhowells@redhat.com \
--cc=dipankar@in.ibm.com \
--cc=eric.dumazet@gmail.com \
--cc=fweisbec@gmail.com \
--cc=josh@joshtriplett.org \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=mingo@elte.hu \
--cc=niv@us.ibm.com \
--cc=patches@linaro.org \
--cc=paul.mckenney@linaro.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®