mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] m68k/sun3: Remove unselectable code in prom_init()
@ 2012-06-20 16:56 Geert Uytterhoeven
  0 siblings, 0 replies; only message in thread
From: Geert Uytterhoeven @ 2012-06-20 16:56 UTC (permalink / raw)
  To: linux-m68k, Sam Creasey; +Cc: Sarah Nadi, linux-kernel, Geert Uytterhoeven

This was copied from SPARC, but isn't relevant for the supported Sun-3
models.

[Geert] Also remove the related extern declarations, and update the
	comment about prom_init().

Reported-by: Sarah Nadi <snadi@uwaterloo.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/sun3/prom/init.c |   48 +------------------------------------------
 1 files changed, 2 insertions(+), 46 deletions(-)

diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index d8e6349..eeba067 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -22,57 +22,13 @@ int prom_root_node;
 struct linux_nodeops *prom_nodeops;
 
 /* You must call prom_init() before you attempt to use any of the
- * routines in the prom library.  It returns 0 on success, 1 on
- * failure.  It gets passed the pointer to the PROM vector.
+ * routines in the prom library.
+ * It gets passed the pointer to the PROM vector.
  */
 
-extern void prom_meminit(void);
-extern void prom_ranges_init(void);
-
 void __init prom_init(struct linux_romvec *rp)
 {
 	romvec = rp;
-#ifndef CONFIG_SUN3
-	switch(romvec->pv_romvers) {
-	case 0:
-		prom_vers = PROM_V0;
-		break;
-	case 2:
-		prom_vers = PROM_V2;
-		break;
-	case 3:
-		prom_vers = PROM_V3;
-		break;
-	case 4:
-		prom_vers = PROM_P1275;
-		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
-		prom_halt();
-		break;
-	default:
-		prom_printf("PROMLIB: Bad PROM version %d\n",
-			    romvec->pv_romvers);
-		prom_halt();
-		break;
-	};
-
-	prom_rev = romvec->pv_plugin_revision;
-	prom_prev = romvec->pv_printrev;
-	prom_nodeops = romvec->pv_nodeops;
-
-	prom_root_node = prom_getsibling(0);
-	if((prom_root_node == 0) || (prom_root_node == -1))
-		prom_halt();
-
-	if((((unsigned long) prom_nodeops) == 0) ||
-	   (((unsigned long) prom_nodeops) == -1))
-		prom_halt();
-
-	prom_meminit();
-
-	prom_ranges_init();
-#endif
-//	printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
-//	       romvec->pv_romvers, prom_rev);
 
 	/* Initialization successful. */
 	return;
-- 
1.7.0.4


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2012-06-20 16:57 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-20 16:56 [PATCH] m68k/sun3: Remove unselectable code in prom_init() Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®