mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>, <kishon@ti.com>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, <balbi@ti.com>
Subject: [PATCH v3 3/5] drivers: usb: musb: move otg specific initializations from twl to glue
Date: Fri, 22 Jun 2012 17:40:53 +0530	[thread overview]
Message-ID: <1340367055-19835-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1340367055-19835-1-git-send-email-kishon@ti.com>

Moved otg specific state(OTG_STATE_B_IDLE, OTG_STATE_A_IDLE) initializations
from twl to glue. These initializations are removed from twl4030 and
twl6030 and moved to the mailbox API defined in glue.
This is part of the cleanup in preparation to make use of usb2 phy
driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/musb/omap2430.c   |    5 +++++
 drivers/usb/otg/twl4030-usb.c |    8 --------
 drivers/usb/otg/twl6030-usb.c |    6 ------
 3 files changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 0636870..c4dc92b 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -249,11 +249,14 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
 	struct omap_musb_board_data *data = pdata->board_data;
+	struct usb_otg *otg = musb->xceiv->otg;
 
 	switch (glue->status) {
 	case OMAP_MUSB_ID_GROUND:
 		dev_dbg(dev, "ID GND\n");
 
+		otg->default_a = true;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 		musb->xceiv->last_event = USB_EVENT_ID;
 		if (!is_otg_enabled(musb) || musb->gadget_driver) {
 			pm_runtime_get_sync(dev);
@@ -265,6 +268,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	case OMAP_MUSB_VBUS_VALID:
 		dev_dbg(dev, "VBUS Connect\n");
 
+		otg->default_a = false;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		musb->xceiv->last_event = USB_EVENT_VBUS;
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(dev);
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 77f4ff6..990263e 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -251,7 +251,6 @@ static enum omap_musb_vbus_id_status
 {
 	int	status;
 	enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
-	struct usb_otg *otg = twl->phy.otg;
 
 	twl->vbus_supplied = false;
 
@@ -291,13 +290,6 @@ static enum omap_musb_vbus_id_status
 
 	spin_lock_irq(&twl->lock);
 	twl->linkstat = linkstat;
-	if (linkstat == OMAP_MUSB_ID_GROUND) {
-		otg->default_a = true;
-		twl->phy.state = OTG_STATE_A_IDLE;
-	} else {
-		otg->default_a = false;
-		twl->phy.state = OTG_STATE_B_IDLE;
-	}
 	spin_unlock_irq(&twl->lock);
 
 	return linkstat;
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 6c75883..66cfea7 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -256,7 +256,6 @@ static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	struct usb_otg *otg = twl->phy.otg;
 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 	u8 vbus_state, hw_state;
 
@@ -269,8 +268,6 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 			regulator_enable(twl->usb3v3);
 			twl->asleep = 1;
 			status = OMAP_MUSB_VBUS_VALID;
-			otg->default_a = false;
-			twl->phy.state = OTG_STATE_B_IDLE;
 			twl->linkstat = status;
 			omap_musb_mailbox(status);
 		} else {
@@ -293,7 +290,6 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	struct usb_otg *otg = twl->phy.otg;
 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
 	u8 hw_state;
 
@@ -307,8 +303,6 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
 								0x10);
 		status = OMAP_MUSB_ID_GROUND;
-		otg->default_a = true;
-		twl->phy.state = OTG_STATE_A_IDLE;
 		twl->linkstat = status;
 		omap_musb_mailbox(status);
 	} else  {
-- 
1.7.5.4


  parent reply	other threads:[~2012-06-22 12:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-22 12:10 [PATCH v3 0/5] usb: musb: cleanup Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 1/5] usb: musb: move work_struct(otg_notifier_work) from core to omap glue Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 2/5] usb: musb: twl: use mailbox API to send VBUS or ID events Kishon Vijay Abraham I
2012-07-03 17:39   ` Matcovschi, Oleg
2012-07-04  5:47     ` ABRAHAM, KISHON VIJAY
2012-07-06  5:52       ` Matcovschi, Oleg
2012-06-22 12:10 ` Kishon Vijay Abraham I [this message]
2012-06-22 12:10 ` [PATCH v3 4/5] usb: musb: omap: use devres API to allocate resources Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 5/5] drivers: usb: otg: twl: " Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340367055-19835-4-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome