From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>, <kishon@ti.com>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-usb@vger.kernel.org>, <balbi@ti.com>
Subject: [PATCH v3 5/5] drivers: usb: otg: twl: use devres API to allocate resources
Date: Fri, 22 Jun 2012 17:40:55 +0530 [thread overview]
Message-ID: <1340367055-19835-6-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1340367055-19835-1-git-send-email-kishon@ti.com>
used devres API while allocating memory resource in twl4030 and twl6030
so that these resources are released automatically on driver detach.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/usb/otg/twl4030-usb.c | 15 +++------------
drivers/usb/otg/twl6030-usb.c | 16 +++-------------
2 files changed, 6 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 990263e..9da89b6 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -591,15 +591,13 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
return -EINVAL;
}
- twl = kzalloc(sizeof *twl, GFP_KERNEL);
+ twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
if (!twl)
return -ENOMEM;
- otg = kzalloc(sizeof *otg, GFP_KERNEL);
- if (!otg) {
- kfree(twl);
+ otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
+ if (!otg)
return -ENOMEM;
- }
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
@@ -623,8 +621,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
err = twl4030_usb_ldo_init(twl);
if (err) {
dev_err(&pdev->dev, "ldo init failed\n");
- kfree(otg);
- kfree(twl);
return err;
}
usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2);
@@ -648,8 +644,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
if (status < 0) {
dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq, status);
- kfree(otg);
- kfree(twl);
return status;
}
@@ -693,9 +687,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
regulator_put(twl->usb1v8);
regulator_put(twl->usb3v1);
- kfree(twl->phy.otg);
- kfree(twl);
-
return 0;
}
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 66cfea7..600c27a 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -395,15 +395,13 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
pdata = dev->platform_data;
- twl = kzalloc(sizeof *twl, GFP_KERNEL);
+ twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
if (!twl)
return -ENOMEM;
- otg = kzalloc(sizeof *otg, GFP_KERNEL);
- if (!otg) {
- kfree(twl);
+ otg = devm_kzalloc(dev, sizeof *otg, GFP_KERNEL);
+ if (!otg)
return -ENOMEM;
- }
twl->dev = &pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
@@ -430,8 +428,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
err = twl6030_usb_ldo_init(twl);
if (err) {
dev_err(&pdev->dev, "ldo init failed\n");
- kfree(otg);
- kfree(twl);
return err;
}
usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2);
@@ -450,8 +446,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq1, status);
device_remove_file(twl->dev, &dev_attr_vbus);
- kfree(otg);
- kfree(twl);
return status;
}
@@ -463,8 +457,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
twl->irq2, status);
free_irq(twl->irq1, twl);
device_remove_file(twl->dev, &dev_attr_vbus);
- kfree(otg);
- kfree(twl);
return status;
}
@@ -495,8 +487,6 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
pdata->phy_exit(twl->dev);
device_remove_file(twl->dev, &dev_attr_vbus);
cancel_work_sync(&twl->set_vbus_work);
- kfree(twl->phy.otg);
- kfree(twl);
return 0;
}
--
1.7.5.4
prev parent reply other threads:[~2012-06-22 12:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-22 12:10 [PATCH v3 0/5] usb: musb: cleanup Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 1/5] usb: musb: move work_struct(otg_notifier_work) from core to omap glue Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 2/5] usb: musb: twl: use mailbox API to send VBUS or ID events Kishon Vijay Abraham I
2012-07-03 17:39 ` Matcovschi, Oleg
2012-07-04 5:47 ` ABRAHAM, KISHON VIJAY
2012-07-06 5:52 ` Matcovschi, Oleg
2012-06-22 12:10 ` [PATCH v3 3/5] drivers: usb: musb: move otg specific initializations from twl to glue Kishon Vijay Abraham I
2012-06-22 12:10 ` [PATCH v3 4/5] usb: musb: omap: use devres API to allocate resources Kishon Vijay Abraham I
2012-06-22 12:10 ` Kishon Vijay Abraham I [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340367055-19835-6-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®