[PATCH 24/28] iommu/amd: Add initialization routines for AMD interrupt remapping

[Joerg Roedel <joerg.roedel@amd.com>]

Add the six routines required to setup interrupt remapping
with the AMD IOMMU. Also put it all together into the AMD
specific irq_remap_ops.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/iommu/amd_iommu.c       |   18 +++++++++++++++++
 drivers/iommu/amd_iommu_init.c  |   42 +++++++++++++++++++++++++++++++++++++++
 drivers/iommu/amd_iommu_proto.h |    8 ++++++++
 3 files changed, 68 insertions(+)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index fed1395..41fe178 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -45,6 +45,7 @@
 
 #include "amd_iommu_proto.h"
 #include "amd_iommu_types.h"
+#include "irq_remapping.h"
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
@@ -4154,4 +4155,21 @@ static int setup_hpet_msi(unsigned int irq, unsigned int id)
 	return 0;
 }
 
+struct irq_remap_ops amd_iommu_irq_ops = {
+	.supported		= amd_iommu_supported,
+	.prepare		= amd_iommu_prepare,
+	.enable			= amd_iommu_enable,
+	.disable		= amd_iommu_disable,
+	.reenable		= amd_iommu_reenable,
+	.enable_faulting	= amd_iommu_enable_faulting,
+	.setup_ioapic_entry	= setup_ioapic_entry,
+#ifdef CONFIG_SMP
+	.set_affinity		= set_affinity,
+#endif
+	.free_irq		= free_irq,
+	.compose_msi_msg	= compose_msi_msg,
+	.msi_alloc_irq		= msi_alloc_irq,
+	.msi_setup_irq		= msi_setup_irq,
+	.setup_hpet_msi		= setup_hpet_msi,
+};
 #endif
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index c487822..204dfea 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -33,6 +33,7 @@
 #include <asm/gart.h>
 #include <asm/x86_init.h>
 #include <asm/iommu_table.h>
+#include <asm/irq_remapping.h>
 
 #include "amd_iommu_proto.h"
 #include "amd_iommu_types.h"
@@ -1896,7 +1897,48 @@ static int __init iommu_go_to_state(enum iommu_init_state state)
 	return ret;
 }
 
+#ifdef CONFIG_IRQ_REMAP
+int __init amd_iommu_prepare(void)
+{
+	return iommu_go_to_state(IOMMU_ACPI_FINISHED);
+}
+
+int __init amd_iommu_supported(void)
+{
+	return amd_iommu_irq_remap ? 1 : 0;
+}
+
+int __init amd_iommu_enable(void)
+{
+	int ret;
+
+	ret = iommu_go_to_state(IOMMU_ENABLED);
+	if (ret)
+		return ret;
 
+	irq_remapping_enabled = 1;
+
+	return 0;
+}
+
+void amd_iommu_disable(void)
+{
+	amd_iommu_suspend();
+}
+
+int amd_iommu_reenable(int mode)
+{
+	amd_iommu_resume();
+
+	return 0;
+}
+
+int __init amd_iommu_enable_faulting(void)
+{
+	/* We enable MSI later when PCI is initialized */
+	return 0;
+}
+#endif
 
 /*
  * This is the core init function for AMD IOMMU hardware in the system.
diff --git a/drivers/iommu/amd_iommu_proto.h b/drivers/iommu/amd_iommu_proto.h
index 1a7f41c..c294961 100644
--- a/drivers/iommu/amd_iommu_proto.h
+++ b/drivers/iommu/amd_iommu_proto.h
@@ -32,6 +32,14 @@ extern void amd_iommu_uninit_devices(void);
 extern void amd_iommu_init_notifier(void);
 extern void amd_iommu_init_api(void);
 
+/* Needed for interrupt remapping */
+extern int amd_iommu_supported(void);
+extern int amd_iommu_prepare(void);
+extern int amd_iommu_enable(void);
+extern void amd_iommu_disable(void);
+extern int amd_iommu_reenable(int);
+extern int amd_iommu_enable_faulting(void);
+
 /* IOMMUv2 specific functions */
 struct iommu_domain;
 
-- 
1.7.9.5