mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] [trivial] mach-omap2: Fix typo in debug message and comment
@ 2012-07-11 15:56 Masanari Iida
  0 siblings, 0 replies; only message in thread
From: Masanari Iida @ 2012-07-11 15:56 UTC (permalink / raw)
  To: trivial, linux-kernel; +Cc: Masanari Iida

Correcting spelling typo in mach-omap2

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
 arch/arm/mach-omap2/board-apollon.c       | 2 +-
 arch/arm/mach-omap2/board-omap4panda.c    | 2 +-
 arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +-
 arch/arm/mach-omap2/sr_device.c           | 2 +-
 arch/arm/mach-omap2/twl-common.c          | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 502c31e..3a8b665 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -329,7 +329,7 @@ static void __init omap_apollon_init(void)
 	/* LCD PWR_EN */
 	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 
-	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
+	/* Use Internal loop-back in MMC/SDIO Module Input Clock selection */
 	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 	v |= (1 << 24);
 	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb26..4d2fac5 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -106,7 +106,7 @@ static struct platform_device leds_gpio = {
 static struct omap_abe_twl6040_data panda_abe_audio_data = {
 	/* Audio out */
 	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	/* HandsFree through expasion connector */
+	/* HandsFree through expansion connector */
 	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 	/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
 	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 13670aa..7787eb8 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -313,7 +313,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 	scu_pwrst_prepare(cpu, power_state);
 
 	/*
-	 * CPU never retuns back if targetted power state is OFF mode.
+	 * CPU never retuns back if targeted power state is OFF mode.
 	 * CPU ONLINE follows normal CPU ONLINE ptah via
 	 * omap_secondary_startup().
 	 */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..62af20f 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -106,7 +106,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
 	if (!volt_data) {
-		pr_warning("%s: No Voltage table registerd fo VDD%d."
+		pr_warning("%s: No Voltage table registered fo VDD%d."
 			"Something really wrong\n\n", __func__, i + 1);
 		goto exit;
 	}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..40d8abb 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -92,7 +92,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 
 void __init omap_pmic_late_init(void)
 {
-	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	/* Init the OMAP TWL parameters (if PMIC has been registered) */
 	if (pmic_i2c_board_info.irq)
 		omap3_twl_init();
 	if (omap4_i2c1_board_info[0].irq)
-- 
1.7.11.1.104.ge7b44f1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2012-07-11 15:56 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-11 15:56 [PATCH] [trivial] mach-omap2: Fix typo in debug message and comment Masanari Iida

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®