[PATCH v7 03/12] x86/topology.c: Support functions for CPU0 online/offline

["Fenghua Yu" <fenghua.yu@intel.com>]

From: Fenghua Yu <fenghua.yu@intel.com>

If CONFIG_BOOTPARAM_HOTPLUG_CPU is turned on, CPU0 hotplug feature is enabled
by default.

If CONFIG_BOOTPARAM_HOTPLUG_CPU is not turned on, CPU0 hotplug feature is not
enabled by default. The kernel parameter cpu0_hotplug can enable CPU0 hotplug
feature at boot.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/topology.c |   41 ++++++++++++++++++++++++++++++++++-------
 1 files changed, 34 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 76ee977..fa87fd6 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -30,23 +30,50 @@
 #include <linux/mmzone.h>
 #include <linux/init.h>
 #include <linux/smp.h>
+#include <linux/irq.h>
 #include <asm/cpu.h>
 
 static DEFINE_PER_CPU(struct x86_cpu, cpu_devices);
 
 #ifdef CONFIG_HOTPLUG_CPU
+
+#ifdef CONFIG_BOOTPARAM_HOTPLUG_CPU0
+static int cpu0_hotpluggable = 1;
+#else
+static int cpu0_hotpluggable;
+static int __init enable_cpu0_hotplug(char *str)
+{
+	cpu0_hotpluggable = 1;
+	return 1;
+}
+
+__setup("cpu0_hotplug", enable_cpu0_hotplug);
+#endif
+
 int __ref arch_register_cpu(int num)
 {
 	/*
-	 * CPU0 cannot be offlined due to several
-	 * restrictions and assumptions in kernel. This basically
-	 * doesn't add a control file, one cannot attempt to offline
-	 * BSP.
+	 * Two known BSP/CPU0 dependencies: Resume from suspend/hibernate
+	 * depends on BSP. PIC interrupts depend on BSP.
 	 *
-	 * Also certain PCI quirks require not to enable hotplug control
-	 * for all CPU's.
+	 * If the BSP depencies are under control, one can tell kernel to
+	 * enable BSP hotplug. This basically adds a control file and
+	 * one can attempt to offline BSP.
 	 */
-	if (num)
+	if (num == 0 && cpu0_hotpluggable) {
+		unsigned int irq;
+		/*
+		 * We won't take down the boot processor on i386 if some
+		 * interrupts only are able to be serviced by the BSP in PIC.
+		 */
+		for_each_active_irq(irq) {
+			if (!IO_APIC_IRQ(irq) && irq_has_action(irq)) {
+				cpu0_hotpluggable = 0;
+				break;
+			}
+		}
+	}
+	if (num || cpu0_hotpluggable)
 		per_cpu(cpu_devices, num).cpu.hotpluggable = 1;
 
 	return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
-- 
1.7.2