From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, linus.walleij@stericsson.com,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree
Date: Thu, 27 Sep 2012 16:12:00 +0100 [thread overview]
Message-ID: <1348758726-25336-2-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1348758726-25336-1-git-send-email-lee.jones@linaro.org>
In the DB8500 Reference Manual SDI devices are described as being
part of peripheral blocks. This is more in line with how these devices
are actually represented in hardware, so here we detail which
peripheral block each of the SDI devices belong in the node name.
Requested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/dbx5x0.dtsi | 12 ++++++------
arch/arm/boot/dts/snowball.dts | 4 ++--
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index c8c39dd..07a085b 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -536,37 +536,37 @@
status = "disabled";
};
- sdi@80126000 {
+ sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
- sdi@80118000 {
+ sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
- sdi@80005000 {
+ sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
- sdi@80119000 {
+ sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
- sdi@80114000 {
+ sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
- sdi@80008000 {
+ sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 100 0x4>;
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 639b8e9..9a37244 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -120,7 +120,7 @@
};
// External Micro SD slot
- sdi@80126000 {
+ sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
@@ -134,7 +134,7 @@
};
// On-board eMMC
- sdi@80114000 {
+ sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
--
1.7.9.5
next prev parent reply other threads:[~2012-09-27 15:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-27 15:11 [PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson Lee Jones
2012-09-27 15:12 ` Lee Jones [this message]
2012-09-27 15:12 ` [PATCH 2/7] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree Lee Jones
2012-09-27 15:12 ` [PATCH 3/7] ARM: ux500: Correct Snowball's external SD/MMC slot's bus width Lee Jones
2012-09-27 15:12 ` [PATCH 4/7] ARM: ux500: Create a DTS hierarchy for ST-Ericsson's HREF boards Lee Jones
2012-09-27 15:12 ` [PATCH 5/7] ARM: ux500: Create a Device Tree for early HREFs Lee Jones
2012-09-27 15:12 ` [PATCH 6/7] ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF Lee Jones
2012-09-27 15:12 ` [PATCH 7/7] ARM: ux500: Remove platform specific device registration when DT is enabled Lee Jones
2012-10-01 10:43 [PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson Lee Jones
2012-10-01 10:43 ` [PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348758726-25336-2-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®