[PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson

[PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson

[Lee Jones]

Contained in this patch are some serious clean-ups for HREF related
Device Tree code. We make clear definition between pre-v60 and post-
v60 HREFs with the creation of their own DTS files. We also start to
take out most of the device registration calls which were duplicated
to aid with step-by-step DT enablement. There are also some small
fixes for the Snowball DTS which were uncovered during this
enablement phase.

  arch/arm/boot/dts/dbx5x0.dtsi      |   12 +-
  arch/arm/boot/dts/href.dtsi        |  274 ++++++++++++++++++++++++++++++++++++
  arch/arm/boot/dts/hrefprev60.dts   |   31 ++++
  arch/arm/boot/dts/hrefv60plus.dts  |  210 +--------------------------
  arch/arm/boot/dts/snowball.dts     |    6 +-
  arch/arm/mach-ux500/board-mop500.c |   24 ----
  6 files changed, 318 insertions(+), 239 deletions(-)

[PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree

[Lee Jones]

In the DB8500 Reference Manual SDI devices are described as being
part of peripheral blocks. This is more in line with how these devices
are actually represented in hardware, so here we detail which
peripheral block each of the SDI devices belong in the node name.

Requested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  |   12 ++++++------
 arch/arm/boot/dts/snowball.dts |    4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index c8c39dd..07a085b 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -536,37 +536,37 @@
 			status = "disabled";
 		};
 
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
-		sdi@80118000 {
+		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
-		sdi@80005000 {
+		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
-		sdi@80119000 {
+		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
-		sdi@80008000 {
+		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 100 0x4>;
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 639b8e9..9a37244 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -120,7 +120,7 @@
 		};
 
 		// External Micro SD slot
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
 			bus-width = <8>;
@@ -134,7 +134,7 @@
 		};
 
 		// On-board eMMC
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <50000000>;
 			bus-width = <8>;
-- 
1.7.9.5

[PATCH 2/7] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree

[Lee Jones]

Here we add the Device Tree nodes which are required to successfully
probe the MMCI driver which will enable the four cards available on
ST-Ericsson's HREF hardware development platform.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/hrefv60plus.dts  |   44 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-ux500/board-mop500.c |    1 -
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index e2213204..3fd83c6 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -77,6 +77,50 @@
 			};
 		};
 
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
 		sound {
 			compatible = "stericsson,snd-soc-mop500";
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4eedf1c..38e53b2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -818,7 +818,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		mop500_sdi_init(parent);
 		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-- 
1.7.9.5

[PATCH 3/7] ARM: ux500: Correct Snowball's external SD/MMC slot's bus width

[Lee Jones]

Snowball's external SD/MMC slot is only capable of 4 bit data
transfer, not 8 bits as previously thought. This is a simple
fixup moving to the correct settings.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/snowball.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 9a37244..6a2b58b 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -123,7 +123,7 @@
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
-			bus-width = <8>;
+			bus-width = <4>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-- 
1.7.9.5

[PATCH 4/7] ARM: ux500: Create a DTS hierarchy for ST-Ericsson's HREF boards

[Lee Jones]

There are two main versions of the ST-Ericsson hardware reference board,
each with subtle differences. These versions are described in current
platform data as 'mop500' for HREF v1.1 & v2.0 and 'hrefv60+' for latter
incarnations. However, the boards have much in common, so this patch
creates a .dtsi (Device Tree Source Include) file which describes the
similarities between the two boards and individual 'hrefprev60' and
'hrefv60plus' .dts files which depict the differences.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/href.dtsi       |  262 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/hrefv60plus.dts |  256 +-----------------------------------
 2 files changed, 264 insertions(+), 254 deletions(-)
 create mode 100644 arch/arm/boot/dts/href.dtsi

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
new file mode 100644
index 0000000..27baa44
--- /dev/null
+++ b/arch/arm/boot/dts/href.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "dbx5x0.dtsi"
+
+/ {
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
+
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 3fd83c6..2a85893 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -11,261 +11,9 @@
 
 /dts-v1/;
 /include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
 
 / {
-	model = "ST-Ericsson HREF platform with Device Tree";
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
 	compatible = "st-ericsson,hrefv60+";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc-u9500 {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
-
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-
-			tps61052@33 {
-				compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
-
-		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
-				reg = <0x33>;
-			};
-
-			lp5521@0x34 {
-				compatible = "lp5521";
-				reg = <0x34>;
-			};
-
-			bh1780@0x29 {
-				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
-			};
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
-
-		msp1: msp@80124000 {
-			status = "okay";
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500@5 {
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-	};
 };
-- 
1.7.9.5

[PATCH 5/7] ARM: ux500: Create a Device Tree for early HREFs

[Lee Jones]

In ux500 platform code we currently support a number of devices.
Two of these devices are fairly similar, but have key differences.
Early (pre-v60) HREFs and the more up-to-date versions (v60+), and
they both need to be supported by Device Tree. Here we apply a DT
source file for the earlier versions.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/hrefprev60.dts |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 arch/arm/boot/dts/hrefprev60.dts

diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
new file mode 100644
index 0000000..2dd28b9
--- /dev/null
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
+	compatible = "st-ericsson,mop500";
+
+	soc-u9500 {
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+	};
+};
-- 
1.7.9.5

[PATCH 6/7] ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF

[Lee Jones]

Here we ensure the SFH7741 Proximity Sensor is registered through
gpio-keys when booting with Device Tree enabled.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/href.dtsi       |   11 +++++++++++
 arch/arm/boot/dts/hrefprev60.dts  |    6 ++++++
 arch/arm/boot/dts/hrefv60plus.dts |    6 ++++++
 3 files changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 27baa44..592fb9d 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -16,6 +16,17 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			linux,code = <11>;
+			label = "SFH7741 Proximity Sensor";
+		};
+	};
+
 	soc-u9500 {
 		uart@80120000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
index 2dd28b9..128cf1c 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -17,6 +17,12 @@
 	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
 	compatible = "st-ericsson,mop500";
 
+	gpio_keys {
+		button@1 {
+			gpios  = <&tc3589x_gpio 7 0x4>;
+		};
+	};
+
 	soc-u9500 {
 		i2c@80004000 {
 			tps61052@33 {
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2a85893..1252d8a 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -16,4 +16,10 @@
 / {
 	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
 	compatible = "st-ericsson,hrefv60+";
+
+	gpio_keys {
+		button@1 {
+			gpios  = <&gpio6 25 0x4>;
+		};
+	};
 };
-- 
1.7.9.5

[PATCH 7/7] ARM: ux500: Remove platform specific device registration when DT is enabled

[Lee Jones]

Most devices have now been successfully DT:ed and each supported
platform has its own Device Tree source file. Hence the majority
of the platform specific device registration calls can now be
successfully removed.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500.c |   29 +----------------------------
 1 file changed, 1 insertion(+), 28 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 38e53b2..5dd4a59 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -793,8 +793,6 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 static void __init u8500_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
 
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
@@ -804,37 +802,12 @@ static void __init u8500_init_machine(void)
 	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 
+	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
 	parent = u8500_of_init_devices();
 
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
 	/* automatically probe child nodes of db8500 device */
 	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
 
-	if (of_machine_is_compatible("st-ericsson,mop500")) {
-		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-		platform_add_devices(mop500_platform_devs,
-				ARRAY_SIZE(mop500_platform_devs));
-
-		mop500_audio_init(parent);
-		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-		i2c_register_board_info(2, mop500_i2c2_devices,
-					ARRAY_SIZE(mop500_i2c2_devices));
-
-	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
-		/*
-		 * The HREFv60 board removed a GPIO expander and routed
-		 * all these GPIO pins to the internal GPIO controller
-		 * instead.
-		 */
-		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-		platform_add_devices(mop500_platform_devs,
-				ARRAY_SIZE(mop500_platform_devs));
-	}
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
-- 
1.7.9.5

[PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree

[Lee Jones]

In the DB8500 Reference Manual SDI devices are described as being
part of peripheral blocks. This is more in line with how these devices
are actually represented in hardware, so here we detail which
peripheral block each of the SDI devices belong in the node name.

Requested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  |   12 ++++++------
 arch/arm/boot/dts/snowball.dts |    4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index c8c39dd..07a085b 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -536,37 +536,37 @@
 			status = "disabled";
 		};
 
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
-		sdi@80118000 {
+		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
-		sdi@80005000 {
+		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
-		sdi@80119000 {
+		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
-		sdi@80008000 {
+		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 100 0x4>;
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 639b8e9..9a37244 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -120,7 +120,7 @@
 		};
 
 		// External Micro SD slot
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
 			bus-width = <8>;
@@ -134,7 +134,7 @@
 		};
 
 		// On-board eMMC
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <50000000>;
 			bus-width = <8>;
-- 
1.7.9.5