mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Viresh Kumar <viresh.linux@gmail.com>,
	Vinod Koul <vinod.koul@intel.com>,
	linux-kernel@vger.kernel.org,
	spear-devel <spear-devel@list.st.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH 1/3] dmaengine: dw_dmac: add PCI part of the driver
Date: Tue, 30 Oct 2012 14:32:10 +0200	[thread overview]
Message-ID: <1351600332-29443-2-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1351600332-29443-1-git-send-email-andriy.shevchenko@linux.intel.com>

From: Heikki Krogerus <heikki.krogerus@linux.intel.com>

This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Medfield.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/Kconfig       |    9 +++
 drivers/dma/Makefile      |    1 +
 drivers/dma/dw_dmac_pci.c |  133 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 drivers/dma/dw_dmac_pci.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6761cc8..ae706ca 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -100,6 +100,15 @@ config DW_DMAC_BIG_ENDIAN_IO
 
 	  If unsure, use the default setting.
 
+config DW_DMAC_PCI
+	tristate "Synopsys DesignWare AHB DMA support (PCI bus)"
+	depends on PCI
+	select DW_DMAC
+	help
+	  Support the Synopsys DesignWare AHB DMA controller on the platfroms
+	  that provide it as a PCI device. For example, Intel Medfield has
+	  integrated this GPDMA controller.
+
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"
 	depends on ARCH_AT91
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7428fea..15eef5f 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_DW_DMAC_PCI) += dw_dmac_pci.o
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/dw_dmac_pci.c b/drivers/dma/dw_dmac_pci.c
new file mode 100644
index 0000000..043a963
--- /dev/null
+++ b/drivers/dma/dw_dmac_pci.c
@@ -0,0 +1,133 @@
+/*
+ * PCI driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2012 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dw_dmac.h>
+
+static struct dw_dma_platform_data dw_pci_pdata = {
+	.is_private = 1,
+	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+	.chan_priority = CHAN_PRIORITY_ASCENDING,
+};
+
+static DEFINE_IDA(dw_pci_ida);
+
+static int __devinit dw_pci_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *pid)
+{
+	struct platform_device *pd;
+	struct resource r[2];
+	struct dw_dma_platform_data *driver = (void *)pid->driver_data;
+	int id, ret;
+
+	id = ida_simple_get(&dw_pci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return id;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto put_id;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		goto err0;
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		goto err0;
+
+	pd = platform_device_alloc("dw_dmac", id);
+	if (!pd) {
+		dev_err(&pdev->dev, "can't allocate dw_dmac platform device\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	memset(r, 0, sizeof(r));
+
+	r[0].start = pci_resource_start(pdev, 0);
+	r[0].end = pci_resource_end(pdev, 0);
+	r[0].flags = IORESOURCE_MEM;
+
+	r[1].start = pdev->irq;
+	r[1].flags = IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(pd, r, ARRAY_SIZE(r));
+	if (ret) {
+		dev_err(&pdev->dev, "can't add resources to platform device\n");
+		goto err1;
+	}
+
+	ret = platform_device_add_data(pd, driver, sizeof(*driver));
+	if (ret)
+		goto err1;
+
+	dma_set_coherent_mask(&pd->dev, pdev->dev.coherent_dma_mask);
+	pd->dev.dma_mask = pdev->dev.dma_mask;
+	pd->dev.dma_parms = pdev->dev.dma_parms;
+	pd->dev.parent = &pdev->dev;
+
+	pci_set_drvdata(pdev, pd);
+
+	ret = platform_device_add(pd);
+	if (ret) {
+		dev_err(&pdev->dev, "platform_device_add failed\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	platform_device_put(pd);
+err0:
+	pci_disable_device(pdev);
+put_id:
+	ida_simple_remove(&dw_pci_ida, id);
+	return ret;
+}
+
+static void __devexit dw_pci_remove(struct pci_dev *pdev)
+{
+	struct platform_device *pd = pci_get_drvdata(pdev);
+
+	platform_device_unregister(pd);
+	ida_simple_remove(&dw_pci_ida, pd->id);
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
+	{ PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
+
+static struct pci_driver dw_pci_driver = {
+	.name		= "dw_dmac_pci",
+	.id_table	= dw_pci_id_table,
+	.probe		= dw_pci_probe,
+	.remove		= __devexit_p(dw_pci_remove),
+};
+
+module_pci_driver(dw_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare DMAC PCI driver");
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
-- 
1.7.10.4


  reply	other threads:[~2012-10-30 14:03 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-30 12:32 [PATCH 0/3] dw_dmac: add PCI driver and move dw stuff to its own folder Andy Shevchenko
2012-10-30 12:32 ` Andy Shevchenko [this message]
2012-10-30 12:32 ` [PATCH 2/3] dma: move dw_dmac driver to an own directory Andy Shevchenko
2012-10-30 12:35   ` Felipe Balbi
2012-10-30 12:32 ` [PATCH 3/3] MAINTAINERS: add recently created files to dw_dmac section Andy Shevchenko
2012-10-30 13:38   ` viresh kumar
2012-10-30 13:47 ` [PATCH 0/3] dw_dmac: add PCI driver and move dw stuff to its own folder viresh kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351600332-29443-2-git-send-email-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=spear-devel@list.st.com \
    --cc=vinod.koul@intel.com \
    --cc=viresh.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome