mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Atul Mukker." <Atulm@ami.com>
To: "'Byron Albert'" <balbert@internet.com>, linux-kernel@vger.kernel.org
Subject: RE: megaraid driver only seeing 2 of 3 logical dirve.
Date: Thu, 27 Sep 2001 15:37:24 -0400	[thread overview]
Message-ID: <1355693A51C0D211B55A00105ACCFE6402D2601A@ATL_MS1> (raw)

The driver you are using seems to be not what we had released ( as I could
make out from the dmesg ) . Which distribution/kernel are you using. I
recommend you to get 1.17c, which is the latest driver. I will mail it
separately to you since sending attachments on this list is probably not a
good idea

Atul Mukker
Software Engineer II

LSI Logic Corporation
RAID Adapters Storage Division
6145-F Northbelt Parkway Norcross GA-30071
770-326-9187, 770-246-8765(Fax)
E-mail: atulm@lsil.com
HTTP: www.lsilogic.com


> -----Original Message-----
> From:	Byron Albert [SMTP:balbert@internet.com]
> Sent:	Thursday, September 27, 2001 1:57 PM
> To:	linux-kernel@vger.kernel.org
> Subject:	megaraid driver only seeing 2 of 3 logical dirve.
> 
> I just added an ami megaraid card to a machine. I configured the 6  9gb
> drives to look like 3 18gb drives and then booted. Linux only saw 2 of
> the 3 drive.  I think got the latest kernel and compiled and rebooted
> and the same below is the relevant dmesg info.  It says it detected 3
> logical drives but the driver only uses two of them.
> 
> I really need this other drive so any help would be appreciated.
> 
> Byron
> 
> p.s. please cc me as I am in the proccess of joining the list
> 
> 
> SCSI subsystem driver Revision: 1.00
> megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
> megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 5:func 1
> scsi0 : Found a MegaRAID controller at 0xf8808000, IRQ: 10
> megaraid: [C :B ] detected 3 logical drives
> megaraid: channel[1] is raid.
> megaraid: channel[2] is raid.
> megaraid: channel[3] is raid.
> megaraid: no BIOS enabled.
> scsi0 : AMI MegaRAID C  254 commands 16 targs 3 chans 8 luns
> scsi0: scanning channel 1 for devices.
> scsi0: scanning channel 2 for devices.
> scsi0: scanning channel 3 for devices.
> scsi0: scanning virtual channel for logical drives.
>   Vendor: MegaRAID  Model: LD0 RAID0 17354R  Rev:   C
>   Type:   Direct-Access                      ANSI SCSI revision: 02
>   Vendor: MegaRAID  Model: LD1 RAID0 17354R  Rev:   C
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Attached scsi disk sda at scsi0, channel 3, id 0, lun 0
> Attached scsi disk sdb at scsi0, channel 3, id 0, lun 1
> SCSI device sda: 35540992 512-byte hdwr sectors (18197 MB)
>  sda: sda1
> SCSI device sdb: 35540992 512-byte hdwr sectors (18197 MB)
>  sdb: sdb1
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

             reply	other threads:[~2001-09-27 19:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-09-27 19:37 Atul Mukker. [this message]
2001-09-27 23:02 ` Alan Cox
  -- strict thread matches above, loose matches on Subject: below --
2001-09-27 17:56 Byron Albert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355693A51C0D211B55A00105ACCFE6402D2601A@ATL_MS1 \
    --to=atulm@ami.com \
    --cc=balbert@internet.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®