From: Byron Albert <balbert@internet.com>
To: linux-kernel@vger.kernel.org
Subject: megaraid driver only seeing 2 of 3 logical dirve.
Date: Thu, 27 Sep 2001 13:56:31 -0400 [thread overview]
Message-ID: <3BB3684F.A4A4DB3C@internet.com> (raw)
I just added an ami megaraid card to a machine. I configured the 6 9gb
drives to look like 3 18gb drives and then booted. Linux only saw 2 of
the 3 drive. I think got the latest kernel and compiled and rebooted
and the same below is the relevant dmesg info. It says it detected 3
logical drives but the driver only uses two of them.
I really need this other drive so any help would be appreciated.
Byron
p.s. please cc me as I am in the proccess of joining the list
SCSI subsystem driver Revision: 1.00
megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 5:func 1
scsi0 : Found a MegaRAID controller at 0xf8808000, IRQ: 10
megaraid: [C :B ] detected 3 logical drives
megaraid: channel[1] is raid.
megaraid: channel[2] is raid.
megaraid: channel[3] is raid.
megaraid: no BIOS enabled.
scsi0 : AMI MegaRAID C 254 commands 16 targs 3 chans 8 luns
scsi0: scanning channel 1 for devices.
scsi0: scanning channel 2 for devices.
scsi0: scanning channel 3 for devices.
scsi0: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID0 17354R Rev: C
Type: Direct-Access ANSI SCSI revision: 02
Vendor: MegaRAID Model: LD1 RAID0 17354R Rev: C
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 3, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 3, id 0, lun 1
SCSI device sda: 35540992 512-byte hdwr sectors (18197 MB)
sda: sda1
SCSI device sdb: 35540992 512-byte hdwr sectors (18197 MB)
sdb: sdb1
next reply other threads:[~2001-09-27 17:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-27 17:56 Byron Albert [this message]
2001-09-27 19:37 Atul Mukker.
2001-09-27 23:02 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BB3684F.A4A4DB3C@internet.com \
--to=balbert@internet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®