mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andi Kleen <andi@firstfloor.org>
To: mingo@kernel.org
Cc: linux-kernel@vger.kernel.org, a.p.zijlstra@chello.nl,
	akpm@linux-foundation.org, acme@redhat.com, eranian@google.com,
	jolsa@redhat.com, namhyung@kernel.org,
	Andi Kleen <ak@linux.intel.com>
Subject: [PATCH 06/12] perf, x86: Support full width counting
Date: Fri, 25 Jan 2013 14:00:39 -0800	[thread overview]
Message-ID: <1359151245-13179-7-git-send-email-andi@firstfloor.org> (raw)
In-Reply-To: <1359151245-13179-1-git-send-email-andi@firstfloor.org>

From: Andi Kleen <ak@linux.intel.com>

Recent Intel CPUs have a new alternative MSR range for perfctrs that allows
writing the full counter width. Enable this range if the hardware reports it
using a new capability bit. This lowers overhead of perf stat slightly because
it has to do less interrupts to accumulate the counter value. On Haswell it
also avoids some problems with TSX aborting when the end of the counter
range is reached.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 arch/x86/include/uapi/asm/msr-index.h  |    3 +++
 arch/x86/kernel/cpu/perf_event.h       |    1 +
 arch/x86/kernel/cpu/perf_event_intel.c |    6 ++++++
 3 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
index 433a59f..af41a77 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -163,6 +163,9 @@
 #define MSR_KNC_EVNTSEL0               0x00000028
 #define MSR_KNC_EVNTSEL1               0x00000029
 
+/* Alternative perfctr range with full access. */
+#define MSR_IA32_PMC0			0x000004c1
+
 /* AMD64 MSRs. Not complete. See the architecture manual for a more
    complete list. */
 
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 1567b0d..ce2a863 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -278,6 +278,7 @@ union perf_capabilities {
 		u64	pebs_arch_reg:1;
 		u64	pebs_format:4;
 		u64	smm_freeze:1;
+		u64	fw_write:1;
 	};
 	u64	capabilities;
 };
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 44e18c02..bc21bce 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -2247,5 +2247,11 @@ __init int intel_pmu_init(void)
 		}
 	}
 
+	/* Support full width counters using alternative MSR range */
+	if (x86_pmu.intel_cap.fw_write) {
+		x86_pmu.max_period = x86_pmu.cntval_mask;
+		x86_pmu.perfctr = MSR_IA32_PMC0;
+	}
+
 	return 0;
 }
-- 
1.7.7.6


  parent reply	other threads:[~2013-01-25 22:01 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-25 22:00 Basic perf PMU support for Haswell v1 Andi Kleen
2013-01-25 22:00 ` [PATCH 01/12] perf, x86: Add PEBSv2 record support Andi Kleen
2013-01-28 13:15   ` Stephane Eranian
2013-01-28 16:10     ` Andi Kleen
2013-01-31 17:15   ` Stephane Eranian
2013-01-25 22:00 ` [PATCH 02/12] perf, x86: Basic Haswell PMU support v2 Andi Kleen
2013-01-28 15:34   ` Stephane Eranian
2013-01-28 16:16     ` Andi Kleen
2013-01-25 22:00 ` [PATCH 03/12] perf, x86: Basic Haswell PEBS support v3 Andi Kleen
2013-01-28 15:56   ` Stephane Eranian
2013-01-25 22:00 ` [PATCH 04/12] perf, x86: Support the TSX intx/intx_cp qualifiers v2 Andi Kleen
2013-01-26 11:54   ` Ingo Molnar
2013-01-26 21:00     ` Andi Kleen
2013-01-27 13:14       ` Ingo Molnar
     [not found]         ` <20130128050234.GQ30577@one.firstfloor.org>
2013-01-28 10:47           ` Ingo Molnar
2013-01-28 16:52   ` Stephane Eranian
2013-01-28 17:37     ` Andi Kleen
2013-01-25 22:00 ` [PATCH 05/12] perf, x86: Support Haswell v4 LBR format Andi Kleen
2013-01-28 21:47   ` Stephane Eranian
2013-01-28 22:08     ` Andi Kleen
2013-01-28 22:20       ` Stephane Eranian
2013-01-25 22:00 ` Andi Kleen [this message]
2013-01-25 22:00 ` [PATCH 07/12] perf, x86: Avoid checkpointed counters causing excessive TSX aborts v3 Andi Kleen
2013-01-28 22:32   ` Stephane Eranian
2013-01-28 23:16     ` Andi Kleen
2013-01-29  0:30       ` Stephane Eranian
2013-01-29  1:00         ` Andi Kleen
2013-01-30  8:51           ` Stephane Eranian
2013-01-30 20:58             ` Andi Kleen
2013-01-25 22:00 ` [PATCH 08/12] perf, x86: Move NMI clearing to end of PMI handler after the counter registers are reset Andi Kleen
2013-01-25 22:00 ` [PATCH 09/12] perf, x86: Disable LBR recording for unknown LBR_FMT Andi Kleen
2013-01-25 22:00 ` [PATCH 10/12] perf, x86: Support LBR filtering by INTX/NOTX/ABORT v2 Andi Kleen
2013-01-25 22:00 ` [PATCH 11/12] perf, tools: Support sorting by intx, abort branch flags v2 Andi Kleen
2013-01-25 22:00 ` [PATCH 12/12] perf, tools: Add abort_tx,no_tx,in_tx branch filter options to perf record -j v3 Andi Kleen
2013-01-31 17:19 ` Basic perf PMU support for Haswell v1 Stephane Eranian
2013-01-31 17:47   ` Andi Kleen
2013-01-31 22:51 Basic perf PMU support for Haswell v2 Andi Kleen
2013-01-31 22:51 ` [PATCH 06/12] perf, x86: Support full width counting Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359151245-13179-7-git-send-email-andi@firstfloor.org \
    --to=andi@firstfloor.org \
    --cc=a.p.zijlstra@chello.nl \
    --cc=acme@redhat.com \
    --cc=ak@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=eranian@google.com \
    --cc=jolsa@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=namhyung@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome