From: Vivek Gautam <gautam.vivek@samsung.com>
To: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, gregkh@linuxfoundation.org,
balbi@ti.com, sarah.a.sharp@linux.intel.com,
kgene.kim@samsung.com, dianders@chromium.org,
sylvester.nawrocki@gmail.com, tomasz.figa@gmail.com
Subject: [PATCH 3/4] usb: dwc3: exynos: Enable runtime power management
Date: Mon, 28 Jan 2013 17:12:27 +0530 [thread overview]
Message-ID: <1359373348-18320-4-git-send-email-gautam.vivek@samsung.com> (raw)
In-Reply-To: <1359373348-18320-1-git-send-email-gautam.vivek@samsung.com>
Enabling runtime power management on dwc3-exynos to save
power and allow its PHY's power to be managed at runtime.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
drivers/usb/dwc3/dwc3-exynos.c | 47 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index aae5328..c51e8c1 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -157,11 +157,15 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
goto err4;
}
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
return 0;
err4:
clk_disable(clk);
clk_put(clk);
+ pm_runtime_disable(&pdev->dev);
err3:
platform_device_put(dwc3);
err1:
@@ -174,6 +178,8 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
+ pm_runtime_disable(&pdev->dev);
+
platform_device_unregister(exynos->dwc3);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
@@ -186,6 +192,46 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
return 0;
}
+static int dwc3_exynos_runtime_suspend(struct device *dev)
+{
+ struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+ struct platform_device *pdev_dwc = exynos->dwc3;
+ struct dwc3 *dwc = NULL;
+
+ dwc = platform_get_drvdata(pdev_dwc);
+
+ if (!dwc)
+ return 0;
+
+ pm_runtime_put_sync(dwc->usb3_phy->dev);
+
+ clk_disable(exynos->clk);
+
+ return 0;
+}
+static int dwc3_exynos_runtime_resume(struct device *dev)
+{
+ struct dwc3_exynos *exynos = dev_get_drvdata(dev);
+ struct platform_device *pdev_dwc = exynos->dwc3;
+ struct dwc3 *dwc = NULL;
+
+ dwc = platform_get_drvdata(pdev_dwc);
+
+ clk_enable(exynos->clk);
+
+ if (!dwc)
+ return 0;
+
+ pm_runtime_get_sync(dwc->usb3_phy->dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops dwc3_exynos_pm_ops = {
+ SET_RUNTIME_PM_OPS(dwc3_exynos_runtime_suspend,
+ dwc3_exynos_runtime_resume, NULL)
+};
+
#ifdef CONFIG_OF
static const struct of_device_id exynos_dwc3_match[] = {
{ .compatible = "samsung,exynos-dwc3" },
@@ -200,6 +246,7 @@ static struct platform_driver dwc3_exynos_driver = {
.driver = {
.name = "exynos-dwc3",
.of_match_table = of_match_ptr(exynos_dwc3_match),
+ .pm = &dwc3_exynos_pm_ops,
},
};
--
1.7.6.5
next prev parent reply other threads:[~2013-01-28 11:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-28 11:42 [PATCH 0/4] usb: dwc3/xhci: " Vivek Gautam
2013-01-28 11:42 ` [PATCH 1/4] usb: xhci: Enable runtime pm in xhci-plat Vivek Gautam
2013-01-28 11:42 ` [PATCH 2/4] USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend Vivek Gautam
2013-01-28 11:45 ` Felipe Balbi
2013-01-28 13:36 ` Vivek Gautam
2013-02-27 8:06 ` Felipe Balbi
2013-02-27 8:53 ` Vivek Gautam
2013-01-28 11:42 ` Vivek Gautam [this message]
2013-01-28 11:47 ` [PATCH 3/4] usb: dwc3: exynos: Enable runtime power management Felipe Balbi
2013-01-28 11:58 ` Vivek Gautam
2013-01-28 12:12 ` Felipe Balbi
2013-01-28 12:27 ` Vivek Gautam
2013-01-28 12:29 ` Felipe Balbi
2013-01-28 11:42 ` [PATCH 4/4] usb: phy: samsung: Enable runtime power management on samsung-usb3 Vivek Gautam
2013-01-28 12:09 ` Felipe Balbi
2013-01-28 13:04 ` Vivek Gautam
2013-01-28 13:07 ` Felipe Balbi
2013-01-28 13:24 ` Vivek Gautam
2013-01-28 13:25 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359373348-18320-4-git-send-email-gautam.vivek@samsung.com \
--to=gautam.vivek@samsung.com \
--cc=balbi@ti.com \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
--cc=sylvester.nawrocki@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®