From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: broonie@opensource.wolfsonmicro.com, linus.walleij@linaro.org,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 22/49] regulator: ab8500: Prepare the driver for additional platforms
Date: Wed, 6 Feb 2013 10:53:44 +0000 [thread overview]
Message-ID: <1360148051-7560-23-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1360148051-7560-1-git-send-email-lee.jones@linaro.org>
More platforms are to be supported by the AB8500 regulator driver,
so in this patch we prepare for their arrival. Instead of using
the AB8500 settings blindly, we provide an infrastructure where
adding a new platform is as easy as providing a couple of platform
specific data structures.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/ab8500.c | 76 ++++++++++++++++++++++++++++----------------
1 file changed, 49 insertions(+), 27 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 2855b51..aadaa9c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -764,46 +764,47 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
};
static int ab8500_regulator_init_registers(struct platform_device *pdev,
+ struct ab8500_reg_init *reg_init,
int id, int mask, int value)
{
int err;
BUG_ON(value & ~mask);
- BUG_ON(mask & ~ab8500_reg_init[id].mask);
+ BUG_ON(mask & ~reg_init[id].mask);
/* initialize register */
err = abx500_mask_and_set_register_interruptible(
&pdev->dev,
- ab8500_reg_init[id].bank,
- ab8500_reg_init[id].addr,
+ reg_init[id].bank,
+ reg_init[id].addr,
mask, value);
if (err < 0) {
dev_err(&pdev->dev,
"Failed to initialize 0x%02x, 0x%02x.\n",
- ab8500_reg_init[id].bank,
- ab8500_reg_init[id].addr);
+ reg_init[id].bank,
+ reg_init[id].addr);
return err;
}
dev_vdbg(&pdev->dev,
" init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
- ab8500_reg_init[id].bank,
- ab8500_reg_init[id].addr,
+ reg_init[id].bank,
+ reg_init[id].addr,
mask, value);
return 0;
}
static int ab8500_regulator_register(struct platform_device *pdev,
- struct regulator_init_data *init_data,
- int id,
- struct device_node *np)
+ struct regulator_init_data *init_data,
+ struct ab8500_regulator_info *regulator_info,
+ int id, struct device_node *np)
{
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
int err;
/* assign per-regulator data */
- info = &ab8500_regulator_info[id];
+ info = ®ulator_info[id];
info->dev = &pdev->dev;
config.dev = &pdev->dev;
@@ -829,7 +830,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--id >= 0) {
- info = &ab8500_regulator_info[id];
+ info = ®ulator_info[id];
regulator_unregister(info->regulator);
}
return err;
@@ -838,7 +839,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
return 0;
}
-static struct of_regulator_match ab8500_regulator_matches[] = {
+static struct of_regulator_match ab8500_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
@@ -852,14 +853,18 @@ static struct of_regulator_match ab8500_regulator_matches[] = {
};
static int
-ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
+ab8500_regulator_of_probe(struct platform_device *pdev,
+ struct ab8500_regulator_info *regulator_info,
+ int regulator_info_size,
+ struct of_regulator_match *match,
+ struct device_node *np)
{
int err, i;
- for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ for (i = 0; i < regulator_info_size; i++) {
err = ab8500_regulator_register(
- pdev, ab8500_regulator_matches[i].init_data,
- i, ab8500_regulator_matches[i].of_node);
+ pdev, match[i].init_data, regulator_info,
+ i, match[i].of_node);
if (err)
return err;
}
@@ -871,21 +876,32 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
+ struct of_regulator_match *match;
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
int i, err;
+ struct ab8500_regulator_info *regulator_info;
+ int regulator_info_size;
+ struct ab8500_reg_init *reg_init;
+ int reg_init_size;
+
+ regulator_info = ab8500_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
+ reg_init = ab8500_reg_init;
+ reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
+ match = ab8500_regulator_match;
+ match_size = ARRAY_SIZE(ab8500_regulator_match)
if (np) {
- err = of_regulator_match(&pdev->dev, np,
- ab8500_regulator_matches,
- ARRAY_SIZE(ab8500_regulator_matches));
+ err = of_regulator_match(&pdev->dev, np, match, match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
- err = ab8500_regulator_of_probe(pdev, np);
+ err = ab8500_regulator_of_probe(pdev, regulator_info,
+ regulator_info_size, match, np);
return err;
}
@@ -907,7 +923,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
}
/* make sure the platform data has the correct size */
- if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
+ if (pdata->num_regulator != regulator_info_size) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
@@ -928,7 +944,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
/* check for configuration errors */
BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS);
- err = ab8500_regulator_init_registers(pdev, id, mask, value);
+ err = ab8500_regulator_init_registers(pdev, reg_init, id, mask, value);
if (err < 0)
return err;
}
@@ -939,8 +955,9 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
return err;
/* register all regulators */
- for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
- err = ab8500_regulator_register(pdev, &pdata->regulator[i], i, NULL);
+ for (i = 0; i < regulator_info_size; i++) {
+ err = ab8500_regulator_register(pdev, &pdata->regulator[i],
+ regulator_info, i, NULL);
if (err < 0)
return err;
}
@@ -951,10 +968,15 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
+ struct ab8500_regulator_info *regulator_info;
+ int regulator_info_size;
- for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ regulator_info = ab8500_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
+
+ for (i = 0; i < regulator_info_size; i++) {
struct ab8500_regulator_info *info = NULL;
- info = &ab8500_regulator_info[i];
+ info = ®ulator_info[i];
dev_vdbg(rdev_get_dev(info->regulator),
"%s-remove\n", info->desc.name);
--
1.7.9.5
next prev parent reply other threads:[~2013-02-06 11:01 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 10:53 [PATCH 00/49] Regulators: Bring the AB8500 into the 21st century Lee Jones
2013-02-06 10:53 ` [PATCH 01/49] regulator: ab8500: Further populate initialisation registers Lee Jones
2013-02-07 18:45 ` Mark Brown
2013-02-08 8:20 ` Lee Jones
2013-02-08 10:55 ` Mark Brown
2013-02-06 10:53 ` [PATCH 02/49] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-06 10:53 ` [PATCH 03/49] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-07 18:47 ` Mark Brown
2013-02-06 10:53 ` [PATCH 04/49] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-07 18:49 ` Mark Brown
2013-02-06 10:53 ` [PATCH 05/49] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-07 18:51 ` Mark Brown
2013-02-07 19:08 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 06/49] regulator: ab8500: Another push to synchronise recent AB8500 developments Lee Jones
2013-02-06 10:53 ` [PATCH 07/49] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-06 10:53 ` [PATCH 08/49] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-06 10:53 ` [PATCH 09/49] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-07 15:55 ` Mark Brown
2013-02-07 17:50 ` Lee Jones
2013-02-07 19:06 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 10/49] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-06 10:53 ` [PATCH 11/49] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-06 10:53 ` [PATCH 12/49] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-06 10:53 ` [PATCH 13/49] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-06 10:53 ` [PATCH 14/49] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-06 10:53 ` [PATCH 15/49] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-08 4:25 ` Srinidhi Kasagar
2013-02-06 10:53 ` [PATCH 16/49] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 17/49] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 18/49] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 19/49] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 20/49] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1 Lee Jones
2013-02-07 15:42 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 21/49] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-06 10:53 ` Lee Jones [this message]
2013-02-06 10:53 ` [PATCH 23/49] regulator: ab8500: Add support for the ab9540 Lee Jones
2013-02-06 10:53 ` [PATCH 24/49] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-06 10:53 ` [PATCH 25/49] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-06 10:53 ` [PATCH 26/49] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-07 15:38 ` Linus Walleij
2013-02-07 17:54 ` Lee Jones
2013-02-08 12:10 ` Lee Jones
2013-02-06 10:53 ` [PATCH 27/49] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-06 10:53 ` [PATCH 28/49] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-07 15:43 ` Linus Walleij
2013-02-08 11:13 ` Mark Brown
2013-02-06 10:53 ` [PATCH 29/49] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-06 10:53 ` [PATCH 30/49] regulator: ab8500: Add support for the ab8540 Lee Jones
2013-02-06 10:53 ` [PATCH 31/49] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-06 10:53 ` [PATCH 32/49] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-06 10:53 ` [PATCH 33/49] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-06 10:53 ` [PATCH 34/49] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-06 10:53 ` [PATCH 35/49] regulator: ab8500: Correct regulator id values Lee Jones
2013-02-06 10:53 ` [PATCH 36/49] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-06 10:53 ` [PATCH 37/49] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-06 10:54 ` [PATCH 38/49] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-06 10:54 ` [PATCH 39/49] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-06 10:54 ` [PATCH 40/49] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-06 10:54 ` [PATCH 41/49] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-06 10:54 ` [PATCH 42/49] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 43/49] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-06 10:54 ` [PATCH 44/49] regulator: ab8500: Use a struct to select the good regulator configuration Lee Jones
2013-02-06 10:54 ` [PATCH 45/49] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 46/49] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-06 10:54 ` [PATCH 47/49] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-06 10:54 ` [PATCH 48/49] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-06 10:54 ` [PATCH 49/49] ARM: ux500: Pass regulator platform data using the new format Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360148051-7560-23-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®