From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: broonie@opensource.wolfsonmicro.com, linus.walleij@linaro.org,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 44/49] regulator: ab8500: Use a struct to select the good regulator configuration
Date: Wed, 6 Feb 2013 10:54:06 +0000 [thread overview]
Message-ID: <1360148051-7560-45-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1360148051-7560-1-git-send-email-lee.jones@linaro.org>
At the probe use a structure to select the good regulator array from
from ab9540, ab8505, ab8540 or ab8500 configuration.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/ab8500.c | 135 +++++++++++++++++++++-----------------------
1 file changed, 64 insertions(+), 71 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 490d5ec..b69b4f5 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2846,10 +2846,19 @@ static struct ab8500_reg_init ab8540_reg_init[] = {
REG_INIT(AB8540_REGUCTRLDISCH4, 0x04, 0x49, 0x07),
};
+static struct {
+ struct ab8500_regulator_info *info;
+ int info_size;
+ struct ab8500_reg_init *init;
+ int init_size;
+ struct of_regulator_match *match;
+ int match_size;
+} abx500_regulator;
+
static int ab8500_regulator_init_registers(struct platform_device *pdev,
- struct ab8500_reg_init *reg_init,
int id, int mask, int value)
{
+ struct ab8500_reg_init *reg_init = abx500_regulator.init;
int err;
BUG_ON(value & ~mask);
@@ -2879,7 +2888,6 @@ static int ab8500_regulator_init_registers(struct platform_device *pdev,
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
- struct ab8500_regulator_info *regulator_info,
int id, struct device_node *np)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
@@ -2888,7 +2896,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
int err;
/* assign per-regulator data */
- info = ®ulator_info[id];
+ info = &abx500_regulator.info[id];
info->dev = &pdev->dev;
config.dev = &pdev->dev;
@@ -2914,7 +2922,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--id >= 0) {
- info = ®ulator_info[id];
+ info = &abx500_regulator.info[id];
regulator_unregister(info->regulator);
}
return err;
@@ -2981,19 +2989,49 @@ static struct of_regulator_match ab9540_regulator_match[] = {
{ .name = "ab9540_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
};
+static void abx500_get_regulator_info(struct ab8500 *ab8500)
+{
+ if (is_ab9540(ab8500)) {
+ abx500_regulator.info = ab9540_regulator_info;
+ abx500_regulator.info_size = ARRAY_SIZE(ab9540_regulator_info);
+ abx500_regulator.init = ab9540_reg_init;
+ abx500_regulator.init_size = AB9540_NUM_REGULATOR_REGISTERS;
+ abx500_regulator.match = ab9540_regulator_match;
+ abx500_regulator.match_size = ARRAY_SIZE(ab9540_regulator_match);
+ } else if (is_ab8505(ab8500)) {
+ abx500_regulator.info = ab8505_regulator_info;
+ abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
+ abx500_regulator.init = ab8505_reg_init;
+ abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
+ abx500_regulator.match = ab8505_regulator_match;
+ abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
+ } else if (is_ab8540(ab8500)) {
+ abx500_regulator.info = ab8540_regulator_info;
+ abx500_regulator.info_size = ARRAY_SIZE(ab8540_regulator_info);
+ abx500_regulator.init = ab8540_reg_init;
+ abx500_regulator.init_size = AB8540_NUM_REGULATOR_REGISTERS;
+ abx500_regulator.match = ab8540_regulator_match;
+ abx500_regulator.match_size = ARRAY_SIZE(ab8540_regulator_match);
+ } else {
+ abx500_regulator.info = ab8500_regulator_info;
+ abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
+ abx500_regulator.init = ab8500_reg_init;
+ abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
+ abx500_regulator.match = ab8500_regulator_match;
+ abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
+ }
+}
+
static int
ab8500_regulator_of_probe(struct platform_device *pdev,
- struct ab8500_regulator_info *regulator_info,
- int regulator_info_size,
- struct of_regulator_match *match,
struct device_node *np)
{
+ struct of_regulator_match *match = abx500_regulator.match;
int err, i;
- for (i = 0; i < regulator_info_size; i++) {
+ for (i = 0; i < abx500_regulator.info_size; i++) {
err = ab8500_regulator_register(
- pdev, match[i].init_data, regulator_info,
- i, match[i].of_node);
+ pdev, match[i].init_data, i, match[i].of_node);
if (err)
return err;
}
@@ -3005,59 +3043,31 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
- struct of_regulator_match *match;
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
int i, err;
- struct ab8500_regulator_info *regulator_info;
- int regulator_info_size;
- struct ab8500_reg_init *reg_init;
- int reg_init_size;
- if (is_ab9540(ab8500)) {
- regulator_info = ab9540_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
- reg_init = ab9540_reg_init;
- reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
- match = ab9540_regulator_match;
- match_size = ARRAY_SIZE(ab9540_regulator_match)
- } else if (is_ab8505(ab8500)) {
- regulator_info = ab8505_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
- reg_init = ab8505_reg_init;
- reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
- } else if (is_ab8540(ab8500)) {
- regulator_info = ab8540_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
- reg_init = ab8540_reg_init;
- reg_init_size = AB8540_NUM_REGULATOR_REGISTERS;
- } else {
- regulator_info = ab8500_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
- reg_init = ab8500_reg_init;
- reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
- match = ab8500_regulator_match;
- match_size = ARRAY_SIZE(ab8500_regulator_match)
+ if (!ab8500) {
+ dev_err(&pdev->dev, "null mfd parent\n");
+ return -EINVAL;
}
+ abx500_get_regulator_info(ab8500);
+
if (np) {
- err = of_regulator_match(&pdev->dev, np, match, match_size);
+ err = of_regulator_match(&pdev->dev, np,
+ abx500_regulator.match,
+ abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
- err = ab8500_regulator_of_probe(pdev, regulator_info,
- regulator_info_size, match, np);
+ err = ab8500_regulator_of_probe(pdev, np);
return err;
}
- if (!ab8500) {
- dev_err(&pdev->dev, "null mfd parent\n");
- return -EINVAL;
- }
-
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
@@ -3071,7 +3081,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
}
/* make sure the platform data has the correct size */
- if (pdata->num_regulator != regulator_info_size) {
+ if (pdata->num_regulator != abx500_regulator.info_size) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
@@ -3090,9 +3100,9 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
value = pdata->reg_init[i].value;
/* check for configuration errors */
- BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS);
+ BUG_ON(id >= abx500_regulator.init_size);
- err = ab8500_regulator_init_registers(pdev, reg_init, id, mask, value);
+ err = ab8500_regulator_init_registers(pdev, id, mask, value);
if (err < 0)
return err;
}
@@ -3105,9 +3115,9 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
}
/* register all regulators */
- for (i = 0; i < regulator_info_size; i++) {
+ for (i = 0; i < abx500_regulator.info_size; i++) {
err = ab8500_regulator_register(pdev, &pdata->regulator[i],
- regulator_info, i, NULL);
+ i, NULL);
if (err < 0)
return err;
}
@@ -3119,27 +3129,10 @@ static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_regulator_info *regulator_info;
- int regulator_info_size;
-
-
- if (is_ab9540(ab8500)) {
- regulator_info = ab9540_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
- } else if (is_ab8505(ab8500)) {
- regulator_info = ab8505_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
- } else if (is_ab8540(ab8500)) {
- regulator_info = ab8540_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
- } else {
- regulator_info = ab8500_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
- }
- for (i = 0; i < regulator_info_size; i++) {
+ for (i = 0; i < abx500_regulator.info_size; i++) {
struct ab8500_regulator_info *info = NULL;
- info = ®ulator_info[i];
+ info = &abx500_regulator.info[i];
dev_vdbg(rdev_get_dev(info->regulator),
"%s-remove\n", info->desc.name);
--
1.7.9.5
next prev parent reply other threads:[~2013-02-06 10:57 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 10:53 [PATCH 00/49] Regulators: Bring the AB8500 into the 21st century Lee Jones
2013-02-06 10:53 ` [PATCH 01/49] regulator: ab8500: Further populate initialisation registers Lee Jones
2013-02-07 18:45 ` Mark Brown
2013-02-08 8:20 ` Lee Jones
2013-02-08 10:55 ` Mark Brown
2013-02-06 10:53 ` [PATCH 02/49] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-06 10:53 ` [PATCH 03/49] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-07 18:47 ` Mark Brown
2013-02-06 10:53 ` [PATCH 04/49] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-07 18:49 ` Mark Brown
2013-02-06 10:53 ` [PATCH 05/49] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-07 18:51 ` Mark Brown
2013-02-07 19:08 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 06/49] regulator: ab8500: Another push to synchronise recent AB8500 developments Lee Jones
2013-02-06 10:53 ` [PATCH 07/49] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-06 10:53 ` [PATCH 08/49] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-06 10:53 ` [PATCH 09/49] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-07 15:55 ` Mark Brown
2013-02-07 17:50 ` Lee Jones
2013-02-07 19:06 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 10/49] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-06 10:53 ` [PATCH 11/49] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-06 10:53 ` [PATCH 12/49] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-06 10:53 ` [PATCH 13/49] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-06 10:53 ` [PATCH 14/49] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-06 10:53 ` [PATCH 15/49] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-08 4:25 ` Srinidhi Kasagar
2013-02-06 10:53 ` [PATCH 16/49] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 17/49] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 18/49] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 19/49] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 20/49] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1 Lee Jones
2013-02-07 15:42 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 21/49] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-06 10:53 ` [PATCH 22/49] regulator: ab8500: Prepare the driver for additional platforms Lee Jones
2013-02-06 10:53 ` [PATCH 23/49] regulator: ab8500: Add support for the ab9540 Lee Jones
2013-02-06 10:53 ` [PATCH 24/49] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-06 10:53 ` [PATCH 25/49] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-06 10:53 ` [PATCH 26/49] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-07 15:38 ` Linus Walleij
2013-02-07 17:54 ` Lee Jones
2013-02-08 12:10 ` Lee Jones
2013-02-06 10:53 ` [PATCH 27/49] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-06 10:53 ` [PATCH 28/49] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-07 15:43 ` Linus Walleij
2013-02-08 11:13 ` Mark Brown
2013-02-06 10:53 ` [PATCH 29/49] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-06 10:53 ` [PATCH 30/49] regulator: ab8500: Add support for the ab8540 Lee Jones
2013-02-06 10:53 ` [PATCH 31/49] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-06 10:53 ` [PATCH 32/49] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-06 10:53 ` [PATCH 33/49] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-06 10:53 ` [PATCH 34/49] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-06 10:53 ` [PATCH 35/49] regulator: ab8500: Correct regulator id values Lee Jones
2013-02-06 10:53 ` [PATCH 36/49] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-06 10:53 ` [PATCH 37/49] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-06 10:54 ` [PATCH 38/49] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-06 10:54 ` [PATCH 39/49] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-06 10:54 ` [PATCH 40/49] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-06 10:54 ` [PATCH 41/49] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-06 10:54 ` [PATCH 42/49] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 43/49] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-06 10:54 ` Lee Jones [this message]
2013-02-06 10:54 ` [PATCH 45/49] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 46/49] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-06 10:54 ` [PATCH 47/49] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-06 10:54 ` [PATCH 48/49] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-06 10:54 ` [PATCH 49/49] ARM: ux500: Pass regulator platform data using the new format Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360148051-7560-45-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®