From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan.Bowens@atmel.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
bleung@chromium.org, olofj@chromium.org
Cc: Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 32/40] Input: atmel_mxt_ts - remove unused defines
Date: Fri, 22 Feb 2013 17:58:19 +0000 [thread overview]
Message-ID: <1361555907-19840-33-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1361555907-19840-1-git-send-email-nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 67 +-----------------------------
1 file changed, 1 insertion(+), 66 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8794353..2f3793a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -22,29 +22,14 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-/* Version */
-#define MXT_VER_20 20
-#define MXT_VER_21 21
-#define MXT_VER_22 22
-
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"
/* Registers */
-#define MXT_INFO 0x00
-#define MXT_FAMILY_ID 0x00
-#define MXT_VARIANT_ID 0x01
-#define MXT_VERSION 0x02
-#define MXT_BUILD 0x03
-#define MXT_MATRIX_X_SIZE 0x04
-#define MXT_MATRIX_Y_SIZE 0x05
-#define MXT_OBJECT_NUM 0x06
#define MXT_OBJECT_START 0x07
-
#define MXT_OBJECT_SIZE 6
-
#define MXT_MAX_BLOCK_WRITE 256
/* Object types */
@@ -105,15 +90,6 @@ struct t7_config {
#define MXT_POWER_CFG_RUN 0
#define MXT_POWER_CFG_DEEPSLEEP 1
-/* MXT_GEN_ACQUIRE_T8 field */
-#define MXT_ACQUIRE_CHRGTIME 0
-#define MXT_ACQUIRE_TCHDRIFT 2
-#define MXT_ACQUIRE_DRIFTST 3
-#define MXT_ACQUIRE_TCHAUTOCAL 4
-#define MXT_ACQUIRE_SYNC 5
-#define MXT_ACQUIRE_ATCHCALST 6
-#define MXT_ACQUIRE_ATCHCALSTHR 7
-
/* MXT_TOUCH_MULTI_T9 field */
#define MXT_T9_ORIENT 9
#define MXT_T9_RANGE 18
@@ -136,36 +112,6 @@ struct t9_range {
/* MXT_TOUCH_MULTI_T9 orient */
#define MXT_T9_ORIENT_SWITCH (1 << 0)
-/* MXT_PROCI_GRIPFACE_T20 field */
-#define MXT_GRIPFACE_CTRL 0
-#define MXT_GRIPFACE_XLOGRIP 1
-#define MXT_GRIPFACE_XHIGRIP 2
-#define MXT_GRIPFACE_YLOGRIP 3
-#define MXT_GRIPFACE_YHIGRIP 4
-#define MXT_GRIPFACE_MAXTCHS 5
-#define MXT_GRIPFACE_SZTHR1 7
-#define MXT_GRIPFACE_SZTHR2 8
-#define MXT_GRIPFACE_SHPTHR1 9
-#define MXT_GRIPFACE_SHPTHR2 10
-#define MXT_GRIPFACE_SUPEXTTO 11
-
-/* MXT_PROCI_NOISE field */
-#define MXT_NOISE_CTRL 0
-#define MXT_NOISE_OUTFLEN 1
-#define MXT_NOISE_GCAFUL_LSB 3
-#define MXT_NOISE_GCAFUL_MSB 4
-#define MXT_NOISE_GCAFLL_LSB 5
-#define MXT_NOISE_GCAFLL_MSB 6
-#define MXT_NOISE_ACTVGCAFVALID 7
-#define MXT_NOISE_NOISETHR 8
-#define MXT_NOISE_FREQHOPSCALE 10
-#define MXT_NOISE_FREQ0 11
-#define MXT_NOISE_FREQ1 12
-#define MXT_NOISE_FREQ2 13
-#define MXT_NOISE_FREQ3 14
-#define MXT_NOISE_FREQ4 15
-#define MXT_NOISE_IDLEGCAFVALID 16
-
/* T15 Key array */
int mxt_t15_keys[] = { };
@@ -175,17 +121,6 @@ static unsigned long mxt_t15_keystatus;
#define MXT_COMMS_CTRL 0
#define MXT_COMMS_CMD 1
-/* MXT_SPT_CTECONFIG_T28 field */
-#define MXT_CTE_CTRL 0
-#define MXT_CTE_CMD 1
-#define MXT_CTE_MODE 2
-#define MXT_CTE_IDLEGCAFDEPTH 3
-#define MXT_CTE_ACTVGCAFDEPTH 4
-#define MXT_CTE_VOLTAGE 5
-
-#define MXT_VOLTAGE_DEFAULT 2700000
-#define MXT_VOLTAGE_STEP 10000
-
/* Define for MXT_GEN_COMMAND_T6 */
#define MXT_BOOT_VALUE 0xa5
#define MXT_RESET_VALUE 0x01
@@ -1453,7 +1388,7 @@ static int mxt_get_info(struct mxt_data *data)
int error;
/* Read 7-byte info block starting at address 0 */
- error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
+ error = __mxt_read_reg(client, 0, sizeof(*info), info);
if (error)
return error;
--
1.7.10.4
next prev parent reply other threads:[~2013-02-22 18:14 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-22 17:57 Atmel updates to atmel_mxt_ts touch controller driver Nick Dyer
2013-02-22 17:57 ` [PATCH 01/40] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-02-22 23:20 ` Benson Leung
2013-02-22 17:57 ` [PATCH 02/40] Input: atmel_mxt_ts - add macros for object instances and size Nick Dyer
2013-02-22 17:57 ` [PATCH 03/40] Input: atmel_mxt_ts - Add memory access interface via sysfs Nick Dyer
2013-02-22 17:57 ` [PATCH 04/40] Input: atmel_mxt_ts - Implement debug output for messages Nick Dyer
2013-02-22 17:57 ` [PATCH 05/40] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-02-22 17:57 ` [PATCH 06/40] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-02-22 17:57 ` [PATCH 07/40] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-02-22 17:57 ` [PATCH 08/40] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-02-22 17:57 ` [PATCH 09/40] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-02-22 17:57 ` [PATCH 10/40] Input: atmel_mxt_ts - Improve bootloader support Nick Dyer
2013-02-22 17:57 ` [PATCH 11/40] Input: atmel_mxt_ts - Bootloader addresses for mXT1664/mXT1188S Nick Dyer
2013-02-22 19:06 ` Benson Leung
2013-02-22 19:51 ` Nick Dyer
2013-02-22 23:09 ` Benson Leung
2013-02-22 17:57 ` [PATCH 12/40] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-02-22 17:58 ` [PATCH 13/40] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-02-22 17:58 ` [PATCH 14/40] Input: atmel_mxt_ts - add shutdown function Nick Dyer
2013-02-22 17:58 ` [PATCH 15/40] Input: atmel_mxt_ts - Improve touch reporting for T9 Nick Dyer
2013-02-22 17:58 ` [PATCH 16/40] Input: atmel_mxt_ts - Move input device configuration into separate function Nick Dyer
2013-02-22 17:58 ` [PATCH 17/40] Input: atmel_mxt_ts - Allow input device name to be configured from platform data Nick Dyer
2013-02-22 17:58 ` [PATCH 18/40] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-02-22 17:58 ` [PATCH 19/40] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-02-22 17:58 ` [PATCH 20/40] Input: atmel_mxt_ts - Split interrupt handler into separate functions Nick Dyer
2013-02-22 17:58 ` [PATCH 21/40] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-02-22 17:58 ` [PATCH 22/40] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-02-22 17:58 ` [PATCH 23/40] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-02-22 17:58 ` [PATCH 24/40] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-02-22 17:58 ` [PATCH 25/40] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-02-22 17:58 ` [PATCH 26/40] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-02-22 17:58 ` [PATCH 27/40] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-02-22 17:58 ` [PATCH 28/40] Input: atmel_mxt_ts - Add CHG line handling in bootloader code Nick Dyer
2013-02-22 22:35 ` Benson Leung
2013-02-23 1:45 ` Benson Leung
2013-02-22 17:58 ` [PATCH 29/40] Input: atmel_mxt_ts - Use wait_for_chg in soft_reset Nick Dyer
2013-02-22 17:58 ` [PATCH 30/40] Input: atmel_mxt_ts - recover from bootloader on probe Nick Dyer
2013-02-22 17:58 ` [PATCH 31/40] Input: atmel_mxt_ts - Implement T15 Key Array support Nick Dyer
2013-02-22 17:58 ` Nick Dyer [this message]
2013-02-22 17:58 ` [PATCH 33/40] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-02-22 17:58 ` [PATCH 34/40] Input: atmel_mxt_ts - Remove mxt_make_highchg Nick Dyer
2013-02-22 17:58 ` [PATCH 35/40] Input: atmel_mxt_ts - Improve messages relating to info block read Nick Dyer
2013-02-22 17:58 ` [PATCH 36/40] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-02-22 17:58 ` [PATCH 37/40] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-02-22 17:58 ` [PATCH 38/40] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-02-22 17:58 ` [PATCH 39/40] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-02-22 17:58 ` [PATCH 40/40] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-02-22 20:19 ` Atmel updates to atmel_mxt_ts touch controller driver Peter Meerwald
2013-02-22 20:53 ` Nick Dyer
2013-03-29 16:48 ` Henrik Rydberg
2013-04-08 14:36 ` Nick Dyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361555907-19840-33-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome