mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan.Bowens@atmel.com, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
	bleung@chromium.org, olofj@chromium.org
Cc: Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 04/40] Input: atmel_mxt_ts - Implement debug output for messages
Date: Fri, 22 Feb 2013 17:57:51 +0000	[thread overview]
Message-ID: <1361555907-19840-5-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1361555907-19840-1-git-send-email-nick.dyer@itdev.co.uk>

Add a debug switch which causes all messages from the touch controller to be
dumped to the dmesg log with a set prefix "MXT MSG:". This is used by Atmel
user-space utilities to debug touch operation. This does impact touch
performance somewhat.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |   57 +++++++++++++++++++++++++-----
 1 file changed, 49 insertions(+), 8 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9cfb124..dad0be9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -80,6 +80,9 @@
 #define MXT_SPT_MESSAGECOUNT_T44	44
 #define MXT_SPT_CTECONFIG_T46		46
 
+/* MXT_GEN_MESSAGE_T5 object */
+#define MXT_RPTID_NOMSG		0xff
+
 /* MXT_GEN_COMMAND_T6 field */
 #define MXT_COMMAND_RESET	0
 #define MXT_COMMAND_BACKUPNV	1
@@ -257,6 +260,7 @@ struct mxt_data {
 	unsigned int max_x;
 	unsigned int max_y;
 	struct bin_attribute mem_access_attr;
+	bool debug_enabled;
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
@@ -329,11 +333,10 @@ static bool mxt_object_writable(unsigned int type)
 	}
 }
 
-static void mxt_dump_message(struct device *dev,
-			     struct mxt_message *message)
+static void mxt_dump_message(struct device *dev, struct mxt_message *message)
 {
-	dev_dbg(dev, "reportid: %u\tmessage: %*ph\n",
-		message->reportid, 7, message->message);
+	dev_dbg(dev, "MXT MSG: %*ph\n",
+		       sizeof(struct mxt_message), message);
 }
 
 static int mxt_check_bootloader(struct i2c_client *client,
@@ -579,6 +582,7 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 	struct device *dev = &data->client->dev;
 	u8 reportid;
 	bool update_input = false;
+	bool handled;
 
 	do {
 		if (mxt_read_message(data, &message)) {
@@ -587,20 +591,24 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 		}
 
 		reportid = message.reportid;
+		handled = false;
 
 		if (reportid == data->T6_reportid) {
 			u8 status = payload[0];
 			unsigned csum = mxt_extract_T6_csum(&payload[1]);
 			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
 				status, csum);
+			handled = true;
 		} else if (mxt_is_T9_message(data, &message)) {
 			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
 			update_input = true;
-		} else {
-			mxt_dump_message(dev, &message);
+			handled = true;
 		}
-	} while (reportid != 0xff);
+
+		if (!handled || data->debug_enabled)
+			mxt_dump_message(dev, &message);
+	} while (reportid != MXT_RPTID_NOMSG);
 
 	if (update_input) {
 		input_mt_report_pointer_emulation(data->input_dev, false);
@@ -719,7 +727,7 @@ static int mxt_make_highchg(struct mxt_data *data)
 		error = mxt_read_message(data, &message);
 		if (error)
 			return error;
-	} while (message.reportid != 0xff && --count);
+	} while (message.reportid != MXT_RPTID_NOMSG && --count);
 
 	if (!count) {
 		dev_err(dev, "CHG pin isn't cleared\n");
@@ -1122,6 +1130,36 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }
 
+static ssize_t mxt_debug_enable_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int count;
+	char c;
+
+	c = data->debug_enabled ? '1' : '0';
+	count = sprintf(buf, "%c\n", c);
+
+	return count;
+}
+
+static ssize_t mxt_debug_enable_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int i;
+
+	if (sscanf(buf, "%u", &i) == 1 && i < 2) {
+		data->debug_enabled = (i == 1);
+
+		dev_dbg(dev, "%s\n", i ? "debug enabled" : "debug disabled");
+		return count;
+	} else {
+		dev_dbg(dev, "debug_enabled write error\n");
+		return -EINVAL;
+	}
+}
+
 static int mxt_check_mem_access_params(struct mxt_data *data, loff_t off,
 				       size_t *count)
 {
@@ -1176,12 +1214,15 @@ static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
 static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
+static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
+		   mxt_debug_enable_store);
 
 static struct attribute *mxt_attrs[] = {
 	&dev_attr_fw_version.attr,
 	&dev_attr_hw_version.attr,
 	&dev_attr_object.attr,
 	&dev_attr_update_fw.attr,
+	&dev_attr_debug_enable.attr,
 	NULL
 };
 
-- 
1.7.10.4


  parent reply	other threads:[~2013-02-22 18:09 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-22 17:57 Atmel updates to atmel_mxt_ts touch controller driver Nick Dyer
2013-02-22 17:57 ` [PATCH 01/40] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-02-22 23:20   ` Benson Leung
2013-02-22 17:57 ` [PATCH 02/40] Input: atmel_mxt_ts - add macros for object instances and size Nick Dyer
2013-02-22 17:57 ` [PATCH 03/40] Input: atmel_mxt_ts - Add memory access interface via sysfs Nick Dyer
2013-02-22 17:57 ` Nick Dyer [this message]
2013-02-22 17:57 ` [PATCH 05/40] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-02-22 17:57 ` [PATCH 06/40] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-02-22 17:57 ` [PATCH 07/40] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-02-22 17:57 ` [PATCH 08/40] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-02-22 17:57 ` [PATCH 09/40] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-02-22 17:57 ` [PATCH 10/40] Input: atmel_mxt_ts - Improve bootloader support Nick Dyer
2013-02-22 17:57 ` [PATCH 11/40] Input: atmel_mxt_ts - Bootloader addresses for mXT1664/mXT1188S Nick Dyer
2013-02-22 19:06   ` Benson Leung
2013-02-22 19:51     ` Nick Dyer
2013-02-22 23:09       ` Benson Leung
2013-02-22 17:57 ` [PATCH 12/40] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-02-22 17:58 ` [PATCH 13/40] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-02-22 17:58 ` [PATCH 14/40] Input: atmel_mxt_ts - add shutdown function Nick Dyer
2013-02-22 17:58 ` [PATCH 15/40] Input: atmel_mxt_ts - Improve touch reporting for T9 Nick Dyer
2013-02-22 17:58 ` [PATCH 16/40] Input: atmel_mxt_ts - Move input device configuration into separate function Nick Dyer
2013-02-22 17:58 ` [PATCH 17/40] Input: atmel_mxt_ts - Allow input device name to be configured from platform data Nick Dyer
2013-02-22 17:58 ` [PATCH 18/40] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-02-22 17:58 ` [PATCH 19/40] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-02-22 17:58 ` [PATCH 20/40] Input: atmel_mxt_ts - Split interrupt handler into separate functions Nick Dyer
2013-02-22 17:58 ` [PATCH 21/40] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-02-22 17:58 ` [PATCH 22/40] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-02-22 17:58 ` [PATCH 23/40] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-02-22 17:58 ` [PATCH 24/40] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-02-22 17:58 ` [PATCH 25/40] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-02-22 17:58 ` [PATCH 26/40] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-02-22 17:58 ` [PATCH 27/40] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-02-22 17:58 ` [PATCH 28/40] Input: atmel_mxt_ts - Add CHG line handling in bootloader code Nick Dyer
2013-02-22 22:35   ` Benson Leung
2013-02-23  1:45   ` Benson Leung
2013-02-22 17:58 ` [PATCH 29/40] Input: atmel_mxt_ts - Use wait_for_chg in soft_reset Nick Dyer
2013-02-22 17:58 ` [PATCH 30/40] Input: atmel_mxt_ts - recover from bootloader on probe Nick Dyer
2013-02-22 17:58 ` [PATCH 31/40] Input: atmel_mxt_ts - Implement T15 Key Array support Nick Dyer
2013-02-22 17:58 ` [PATCH 32/40] Input: atmel_mxt_ts - remove unused defines Nick Dyer
2013-02-22 17:58 ` [PATCH 33/40] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-02-22 17:58 ` [PATCH 34/40] Input: atmel_mxt_ts - Remove mxt_make_highchg Nick Dyer
2013-02-22 17:58 ` [PATCH 35/40] Input: atmel_mxt_ts - Improve messages relating to info block read Nick Dyer
2013-02-22 17:58 ` [PATCH 36/40] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-02-22 17:58 ` [PATCH 37/40] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-02-22 17:58 ` [PATCH 38/40] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-02-22 17:58 ` [PATCH 39/40] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-02-22 17:58 ` [PATCH 40/40] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-02-22 20:19 ` Atmel updates to atmel_mxt_ts touch controller driver Peter Meerwald
2013-02-22 20:53   ` Nick Dyer
2013-03-29 16:48 ` Henrik Rydberg
2013-04-08 14:36   ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361555907-19840-5-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome