From: Wenyou Yang <wenyou.yang@atmel.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <grant.likely@secretlab.ca>, <nicolas.ferre@atmel.com>,
<plagnioj@jcrosoft.com>, <richard.genoud@gmail.com>,
<JM.Lin@atmel.com>, <wenyou.yang@atmel.com>,
<linux@arm.linux.org.uk>, <linux@maxim.org.za>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v6 13/16] ARM: at91: add clocks for spi dt entries
Date: Thu, 7 Mar 2013 11:34:29 +0800 [thread overview]
Message-ID: <1362627269-9443-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1362626715-6549-1-git-send-email-wenyou.yang@atmel.com>
From: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
[<wenyou.yang@atmel.com: declare the spi clocks for sam9260, at91sam9g45, and at91sam9n12]
[wenyou.yang@atmel.com: submit the patch]
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux@arm.linux.org.uk
Cc: linux@maxim.org.za
Cc: linux-kernel@vger.kernel.org
---
arch/arm/mach-at91/at91sam9260.c | 2 ++
arch/arm/mach-at91/at91sam9g45.c | 2 ++
arch/arm/mach-at91/at91sam9n12.c | 2 ++
arch/arm/mach-at91/at91sam9x5.c | 2 ++
4 files changed, 8 insertions(+)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b67cd53..44199bc 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d3addee..2ec5efe 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -262,6 +262,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 5dfc8fd..ccd0783 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -172,6 +172,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 44a9a62..a200d8a 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
--
1.7.9.5
next prev parent reply other threads:[~2013-03-07 3:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1362626715-6549-1-git-send-email-wenyou.yang@atmel.com>
2013-03-07 3:26 ` [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set Wenyou Yang
2013-03-07 12:17 ` Sergei Shtylyov
2013-03-08 9:43 ` Yang, Wenyou
2013-03-07 12:30 ` Joachim Eastwood
2013-03-08 1:06 ` Yang, Wenyou
2013-05-02 2:35 ` Yang, Wenyou
2013-05-02 8:12 ` Richard Genoud
2013-05-02 10:34 ` Nicolas Ferre
2013-05-06 10:31 ` Mark Brown
2013-05-07 1:11 ` Yang, Wenyou
2013-05-07 9:31 ` Nicolas Ferre
2013-03-07 3:27 ` [PATCH v6 02/16] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-03-07 3:28 ` [PATCH v6 03/16] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Wenyou Yang
2013-03-07 3:28 ` [PATCH v6 04/16] spi/spi-atmel: add physical base address Wenyou Yang
2013-03-07 3:29 ` [PATCH v6 05/16] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-03-07 3:29 ` [PATCH v6 06/16] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-03-07 3:30 ` [PATCH v6 07/16] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-03-07 3:31 ` [PATCH v6 08/16] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-03-07 3:32 ` [PATCH v6 09/16] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-03-07 3:32 ` [PATCH v6 10/16] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-03-07 3:33 ` [PATCH v6 11/16] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-03-07 3:34 ` [PATCH v6 12/16] spi/spi-atmel: add pinctrl support for atmel spi Wenyou Yang
2013-03-11 13:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-12 1:10 ` Yang, Wenyou
2013-03-07 3:34 ` Wenyou Yang [this message]
2013-03-07 3:35 ` [PATCH v6 14/16] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-03-07 3:35 ` [PATCH v6 15/16] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-03-07 3:36 ` [PATCH v6 16/16] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362627269-9443-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=JM.Lin@atmel.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@maxim.org.za \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=richard.genoud@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®