From: Wenyou Yang <wenyou.yang@atmel.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <grant.likely@secretlab.ca>, <nicolas.ferre@atmel.com>,
<plagnioj@jcrosoft.com>, <richard.genoud@gmail.com>,
<JM.Lin@atmel.com>, <wenyou.yang@atmel.com>,
<linux@arm.linux.org.uk>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v6 15/16] ARM: dts: add spi nodes for the atmel boards
Date: Thu, 7 Mar 2013 11:35:30 +0800 [thread overview]
Message-ID: <1362627330-9540-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1362626715-6549-1-git-send-email-wenyou.yang@atmel.com>
From: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
[wenyou.yang@atmel.com: added spi nodes for the sam9263ek, sam9g20ek, sam9m10g45ek and sam9n12ek boards]
[wenyou.yang@atmel.com: submit the patch]
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux@arm.linux.org.uk
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/at91sam9263ek.dts | 10 ++++++++++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 10 ++++++++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 10 ++++++++++
arch/arm/boot/dts/at91sam9n12ek.dts | 10 ++++++++++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 10 ++++++++++
5 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 1eb0872..a14e424 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -79,6 +79,16 @@
};
};
};
+
+ spi0: spi@fffa4000 {
+ status = "okay";
+ cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index da15e83..23d1f46 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -96,6 +96,16 @@
status = "okay";
pinctrl-0 = <&pinctrl_ssc0_tx>;
};
+
+ spi0: spi@fffc8000 {
+ status = "okay";
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 20c3191..92c52a7 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -102,6 +102,16 @@
};
};
};
+
+ spi0: spi@fffa4000{
+ status = "okay";
+ cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <13000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d400f8d..34c842b 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -67,6 +67,16 @@
};
};
};
+
+ spi0: spi@f0000000 {
+ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 8a7cf1d..09f5e66 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -84,6 +84,16 @@
};
};
};
+
+ spi0: spi@f0000000 {
+ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
usb0: ohci@00600000 {
--
1.7.9.5
next prev parent reply other threads:[~2013-03-07 3:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1362626715-6549-1-git-send-email-wenyou.yang@atmel.com>
2013-03-07 3:26 ` [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set Wenyou Yang
2013-03-07 12:17 ` Sergei Shtylyov
2013-03-08 9:43 ` Yang, Wenyou
2013-03-07 12:30 ` Joachim Eastwood
2013-03-08 1:06 ` Yang, Wenyou
2013-05-02 2:35 ` Yang, Wenyou
2013-05-02 8:12 ` Richard Genoud
2013-05-02 10:34 ` Nicolas Ferre
2013-05-06 10:31 ` Mark Brown
2013-05-07 1:11 ` Yang, Wenyou
2013-05-07 9:31 ` Nicolas Ferre
2013-03-07 3:27 ` [PATCH v6 02/16] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-03-07 3:28 ` [PATCH v6 03/16] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Wenyou Yang
2013-03-07 3:28 ` [PATCH v6 04/16] spi/spi-atmel: add physical base address Wenyou Yang
2013-03-07 3:29 ` [PATCH v6 05/16] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-03-07 3:29 ` [PATCH v6 06/16] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-03-07 3:30 ` [PATCH v6 07/16] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-03-07 3:31 ` [PATCH v6 08/16] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-03-07 3:32 ` [PATCH v6 09/16] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-03-07 3:32 ` [PATCH v6 10/16] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-03-07 3:33 ` [PATCH v6 11/16] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-03-07 3:34 ` [PATCH v6 12/16] spi/spi-atmel: add pinctrl support for atmel spi Wenyou Yang
2013-03-11 13:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-12 1:10 ` Yang, Wenyou
2013-03-07 3:34 ` [PATCH v6 13/16] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-03-07 3:35 ` [PATCH v6 14/16] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-03-07 3:35 ` Wenyou Yang [this message]
2013-03-07 3:36 ` [PATCH v6 16/16] ARM: dts: add pinctrl property for spi node " Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362627330-9540-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=JM.Lin@atmel.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=richard.genoud@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®