[PATCH v6 0/2] ARM: davinci: dm355: add support for vpbe display

[PATCH v6 0/2] ARM: davinci: dm355: add support for vpbe display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

This patch series enables VPBE display driver on DM355.

This patch series is dependent on VPSS clock cleanup patches
(http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg25499.html)
posted.

Chnages for v6:
1: Fixed nits pointed by Sekhar.

Changes for v5:
1: Rebased on 3.9, fix review comments pointed by Sekhar for DM365 series.

Changes for v4:
1: pass different platform names to handle different ip's.

Changes for v3:
1: Replaced obsolete preset API by timings API.

Changes for v2:
1: Removed VPSS clock alias for master and slave which was
   sent for VPSS driver. since this patch was dependent on
   patch[1]. I will revist this patch once MC(captrure driver)
   goes into mainline.
[1] http://www.spinics.net/lists/linux-media/msg50562.html

Lad, Prabhakar (2):
  ARM: davinci: dm355: add support for v4l2 video display
  ARM: davinci: dm355 EVM: add support for VPBE display

 arch/arm/mach-davinci/board-dm355-evm.c |   71 ++++++++++++-
 arch/arm/mach-davinci/davinci.h         |    2 +-
 arch/arm/mach-davinci/dm355.c           |  181 ++++++++++++++++++++++++++++++-
 3 files changed, 246 insertions(+), 8 deletions(-)

-- 
1.7.4.1

[PATCH v6 1/2] ARM: davinci: dm355: add support for v4l2 video display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm355.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c |    4 +-
 arch/arm/mach-davinci/davinci.h         |    2 +-
 arch/arm/mach-davinci/dm355.c           |  181 ++++++++++++++++++++++++++++++-
 3 files changed, 179 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 147b8e1..37d12cc 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -253,8 +253,6 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
-	/* setup input configuration for VPFE input devices */
-	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -344,6 +342,8 @@ static __init void dm355_evm_init(void)
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
 
+	dm355_init_video(&vpfe_cfg, NULL);
+
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 1c2670f..acfe0bb 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -74,7 +74,7 @@ void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
+int __init dm355_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM365 function declarations */
 void __init dm365_init(void);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a917983..20fc75c 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -36,6 +36,17 @@
 
 #define DM355_UART2_BASE	(IO_PHYS + 0x206000)
 
+#define DM355_VDAC_CONFIG		0x01c4002c
+
+#define DM355_OSD_BASE			0x01c70200
+
+#define DM355_VENC_BASE			0x01c70400
+
+#define DM355_VPSS_CLK_CTRL_ADDR		0x44
+#define DM355_VPSS_MUXSEL_EXTCLK_ENABLE		BIT(1)
+#define DM355_VPSS_VENCCLKEN_ENABLE		BIT(3)
+#define DM355_VPSS_DACCLKEN_ENABLE		BIT(4)
+
 /*
  * Device specific clocks
  */
@@ -744,11 +755,151 @@ static struct platform_device vpfe_capture_dev = {
 	},
 };
 
-void dm355_set_vpfe_config(struct vpfe_config *cfg)
+static struct resource dm355_osd_resources[] = {
+	{
+		.start	= DM355_OSD_BASE,
+		.end	= DM355_OSD_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_osd_dev = {
+	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
+	.resource	= dm355_osd_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dm355_venc_resources[] = {
+	{
+		.start	= IRQ_VENCINT,
+		.end	= IRQ_VENCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start	= DM355_VENC_BASE,
+		.end	= DM355_VENC_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* VDAC config register io space */
+	{
+		.start	= DM355_VDAC_CONFIG,
+		.end	= DM355_VDAC_CONFIG + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource dm355_v4l2_disp_resources[] = {
+	{
+		.start	= IRQ_VENCINT,
+		.end	= IRQ_VENCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start	= DM355_VENC_BASE,
+		.end	= DM355_VENC_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
+			    int field)
 {
-	vpfe_capture_dev.dev.platform_data = cfg;
+	switch (if_type) {
+	case V4L2_MBUS_FMT_SGRBG8_1X8:
+		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+		break;
+
+	case V4L2_MBUS_FMT_YUYV10_1X20:
+		if (field)
+			davinci_cfg_reg(DM355_VOUT_FIELD);
+		else
+			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
+	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
+
+	return 0;
+}
+
+static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
+				   unsigned int pclock)
+{
+	void __iomem *vpss_clk_ctrl_reg;
+
+	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(DM355_VPSS_CLK_CTRL_ADDR);
+
+	switch (type) {
+	case VPBE_ENC_STD:
+		writel(DM355_VPSS_DACCLKEN_ENABLE |
+		       DM355_VPSS_VENCCLKEN_ENABLE, vpss_clk_ctrl_reg);
+		break;
+
+	case VPBE_ENC_DV_TIMINGS:
+		if (pclock > 27000000)
+			/*
+			 * For HD, use external clock source since we cannot
+			 * support HD mode with internal clocks.
+			 */
+			writel(DM355_VPSS_MUXSEL_EXTCLK_ENABLE,
+			       vpss_clk_ctrl_reg);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
+static struct platform_device dm355_vpbe_display = {
+	.name		= "vpbe-v4l2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
+	.resource	= dm355_v4l2_disp_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct venc_platform_data dm355_venc_pdata = {
+	.setup_pinmux	= dm355_vpbe_setup_pinmux,
+	.setup_clock	= dm355_venc_setup_clock,
+};
+
+static struct platform_device dm355_venc_dev = {
+	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
+	.resource	= dm355_venc_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= (void *)&dm355_venc_pdata,
+	},
+};
+
+static struct platform_device dm355_vpbe_dev = {
+	.name		= "vpbe_controller",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -868,6 +1019,29 @@ void __init dm355_init(void)
 	davinci_map_sysmod();
 }
 
+int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
+				struct vpbe_config *vpbe_cfg)
+{
+	if (vpfe_cfg || vpbe_cfg)
+		platform_device_register(&dm355_vpss_device);
+
+	if (vpfe_cfg) {
+		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
+		platform_device_register(&dm355_ccdc_dev);
+		platform_device_register(&vpfe_capture_dev);
+	}
+
+	if (vpbe_cfg) {
+		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
+		platform_device_register(&dm355_osd_dev);
+		platform_device_register(&dm355_venc_dev);
+		platform_device_register(&dm355_vpbe_dev);
+		platform_device_register(&dm355_vpbe_display);
+	}
+
+	return 0;
+}
+
 static int __init dm355_init_devices(void)
 {
 	if (!cpu_is_davinci_dm355())
@@ -875,9 +1049,6 @@ static int __init dm355_init_devices(void)
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
-	platform_device_register(&dm355_vpss_device);
-	platform_device_register(&dm355_ccdc_dev);
-	platform_device_register(&vpfe_capture_dev);
 
 	return 0;
 }
-- 
1.7.4.1

[PATCH v6 2/2] ARM: davinci: dm355 EVM: add support for VPBE display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

add support for V4L2 video display to DM355 EVM.
Support for SD modes is provided, along with Composite
output

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c |   69 ++++++++++++++++++++++++++++++-
 1 files changed, 68 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 37d12cc..1043506 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = {
 	.ccdc = "DM355 CCDC",
 };
 
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_525_60,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_625_50,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7E,
+		.upper_margin	= 0x16
+	},
+};
+
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm355evm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
+		.modes		= dm355evm_enc_preset_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+};
+
+static struct vpbe_config dm355evm_display_cfg = {
+	.module_name	= "dm355-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.osd		= {
+		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
+	.outputs	= dm355evm_vpbe_outputs,
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -342,7 +409,7 @@ static __init void dm355_evm_init(void)
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
 
-	dm355_init_video(&vpfe_cfg, NULL);
+	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
-- 
1.7.4.1