* [PATCH v2] davinci: vpif: add pm_runtime support
@ 2013-04-01 6:36 Prabhakar lad
2013-04-01 7:17 ` Rajagopal Venkat
2013-04-02 8:47 ` Hans Verkuil
0 siblings, 2 replies; 6+ messages in thread
From: Prabhakar lad @ 2013-04-01 6:36 UTC (permalink / raw)
To: DLOS, LMML
Cc: LKML, Mauro Carvalho Chehab, Hans Verkuil, Laurent Pinchart,
Sakari Ailus, Lad, Prabhakar, Sekhar Nori
From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Add pm_runtime support to the TI Davinci VPIF driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Sekhar Nori <nsekhar@ti.com>
---
Changes for v2:
1: Removed use of clk API as pointed by Laurent and Sekhar.
drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
1 files changed, 7 insertions(+), 17 deletions(-)
diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
index 28638a8..599cabb 100644
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -23,8 +23,8 @@
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/pm_runtime.h>
#include <linux/v4l2-dv-timings.h>
#include <mach/hardware.h>
@@ -44,7 +44,6 @@ static struct resource *res;
spinlock_t vpif_lock;
void __iomem *vpif_base;
-struct clk *vpif_clk;
/**
* ch_params: video standard configuration parameters for vpif
@@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
goto fail;
}
- vpif_clk = clk_get(&pdev->dev, "vpif");
- if (IS_ERR(vpif_clk)) {
- status = PTR_ERR(vpif_clk);
- goto clk_fail;
- }
- clk_prepare_enable(vpif_clk);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume(&pdev->dev);
+
+ pm_runtime_get(&pdev->dev);
spin_lock_init(&vpif_lock);
dev_info(&pdev->dev, "vpif probe success\n");
return 0;
-clk_fail:
- iounmap(vpif_base);
fail:
release_mem_region(res->start, res_len);
return status;
@@ -459,11 +454,6 @@ fail:
static int vpif_remove(struct platform_device *pdev)
{
- if (vpif_clk) {
- clk_disable_unprepare(vpif_clk);
- clk_put(vpif_clk);
- }
-
iounmap(vpif_base);
release_mem_region(res->start, res_len);
return 0;
@@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int vpif_suspend(struct device *dev)
{
- clk_disable_unprepare(vpif_clk);
+ pm_runtime_put(dev);
return 0;
}
static int vpif_resume(struct device *dev)
{
- clk_prepare_enable(vpif_clk);
+ pm_runtime_get(dev);
return 0;
}
--
1.7.4.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] davinci: vpif: add pm_runtime support
2013-04-01 6:36 [PATCH v2] davinci: vpif: add pm_runtime support Prabhakar lad
@ 2013-04-01 7:17 ` Rajagopal Venkat
2013-04-01 8:23 ` Prabhakar Lad
2013-04-02 8:47 ` Hans Verkuil
1 sibling, 1 reply; 6+ messages in thread
From: Rajagopal Venkat @ 2013-04-01 7:17 UTC (permalink / raw)
To: Prabhakar lad
Cc: DLOS, LMML, LKML, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Sakari Ailus, Sekhar Nori
On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> Add pm_runtime support to the TI Davinci VPIF driver.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Sakari Ailus <sakari.ailus@iki.fi>
> Cc: Sekhar Nori <nsekhar@ti.com>
> ---
> Changes for v2:
> 1: Removed use of clk API as pointed by Laurent and Sekhar.
>
> drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
> 1 files changed, 7 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
> index 28638a8..599cabb 100644
> --- a/drivers/media/platform/davinci/vpif.c
> +++ b/drivers/media/platform/davinci/vpif.c
> @@ -23,8 +23,8 @@
> #include <linux/spinlock.h>
> #include <linux/kernel.h>
> #include <linux/io.h>
> -#include <linux/clk.h>
> #include <linux/err.h>
> +#include <linux/pm_runtime.h>
> #include <linux/v4l2-dv-timings.h>
>
> #include <mach/hardware.h>
> @@ -44,7 +44,6 @@ static struct resource *res;
> spinlock_t vpif_lock;
>
> void __iomem *vpif_base;
> -struct clk *vpif_clk;
>
> /**
> * ch_params: video standard configuration parameters for vpif
> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
> goto fail;
> }
>
> - vpif_clk = clk_get(&pdev->dev, "vpif");
> - if (IS_ERR(vpif_clk)) {
> - status = PTR_ERR(vpif_clk);
> - goto clk_fail;
> - }
> - clk_prepare_enable(vpif_clk);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_resume(&pdev->dev);
> +
> + pm_runtime_get(&pdev->dev);
I don't see runtime-pm ops being registered. Can you explain how clock
prepare/unprepare is taken care by runtime-pm?
>
> spin_lock_init(&vpif_lock);
> dev_info(&pdev->dev, "vpif probe success\n");
> return 0;
>
> -clk_fail:
> - iounmap(vpif_base);
> fail:
> release_mem_region(res->start, res_len);
> return status;
> @@ -459,11 +454,6 @@ fail:
>
> static int vpif_remove(struct platform_device *pdev)
> {
> - if (vpif_clk) {
> - clk_disable_unprepare(vpif_clk);
> - clk_put(vpif_clk);
> - }
> -
> iounmap(vpif_base);
> release_mem_region(res->start, res_len);
> return 0;
> @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev)
> #ifdef CONFIG_PM
> static int vpif_suspend(struct device *dev)
> {
> - clk_disable_unprepare(vpif_clk);
> + pm_runtime_put(dev);
> return 0;
> }
>
> static int vpif_resume(struct device *dev)
> {
> - clk_prepare_enable(vpif_clk);
> + pm_runtime_get(dev);
> return 0;
> }
>
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Regards,
Rajagopal
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] davinci: vpif: add pm_runtime support
2013-04-01 7:17 ` Rajagopal Venkat
@ 2013-04-01 8:23 ` Prabhakar Lad
2013-04-01 8:52 ` Rajagopal Venkat
0 siblings, 1 reply; 6+ messages in thread
From: Prabhakar Lad @ 2013-04-01 8:23 UTC (permalink / raw)
To: Rajagopal Venkat
Cc: DLOS, LMML, LKML, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Sakari Ailus, Sekhar Nori
On Mon, Apr 1, 2013 at 12:47 PM, Rajagopal Venkat
<rajagopal.venkat@linaro.org> wrote:
> On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote:
>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>
>> Add pm_runtime support to the TI Davinci VPIF driver.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
>> Cc: Hans Verkuil <hans.verkuil@cisco.com>
>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Cc: Sakari Ailus <sakari.ailus@iki.fi>
>> Cc: Sekhar Nori <nsekhar@ti.com>
>> ---
>> Changes for v2:
>> 1: Removed use of clk API as pointed by Laurent and Sekhar.
>>
>> drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
>> 1 files changed, 7 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
>> index 28638a8..599cabb 100644
>> --- a/drivers/media/platform/davinci/vpif.c
>> +++ b/drivers/media/platform/davinci/vpif.c
>> @@ -23,8 +23,8 @@
>> #include <linux/spinlock.h>
>> #include <linux/kernel.h>
>> #include <linux/io.h>
>> -#include <linux/clk.h>
>> #include <linux/err.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/v4l2-dv-timings.h>
>>
>> #include <mach/hardware.h>
>> @@ -44,7 +44,6 @@ static struct resource *res;
>> spinlock_t vpif_lock;
>>
>> void __iomem *vpif_base;
>> -struct clk *vpif_clk;
>>
>> /**
>> * ch_params: video standard configuration parameters for vpif
>> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
>> goto fail;
>> }
>>
>> - vpif_clk = clk_get(&pdev->dev, "vpif");
>> - if (IS_ERR(vpif_clk)) {
>> - status = PTR_ERR(vpif_clk);
>> - goto clk_fail;
>> - }
>> - clk_prepare_enable(vpif_clk);
>> + pm_runtime_enable(&pdev->dev);
>> + pm_runtime_resume(&pdev->dev);
>> +
>> + pm_runtime_get(&pdev->dev);
>
> I don't see runtime-pm ops being registered. Can you explain how clock
> prepare/unprepare is taken care by runtime-pm?
>
The pm_runtime API handles the clock management for you.
For Davinci platform runtime PM support for clock management has
been added (You can find it in arch/arm/mach-davinci/pm_domain.c)
When runtime PM is enabled, the davinci runtime PM implementation will
use the pm_clk layer to enable/disable clocks on demand.
For more/detailed understanding you can go through the pm_runtime framework.
Regards,
--Prabhakar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] davinci: vpif: add pm_runtime support
2013-04-01 8:23 ` Prabhakar Lad
@ 2013-04-01 8:52 ` Rajagopal Venkat
0 siblings, 0 replies; 6+ messages in thread
From: Rajagopal Venkat @ 2013-04-01 8:52 UTC (permalink / raw)
To: Prabhakar Lad
Cc: DLOS, LMML, LKML, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Sakari Ailus, Sekhar Nori
On 1 April 2013 13:53, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote:
> On Mon, Apr 1, 2013 at 12:47 PM, Rajagopal Venkat
> <rajagopal.venkat@linaro.org> wrote:
>> On 1 April 2013 12:06, Prabhakar lad <prabhakar.csengg@gmail.com> wrote:
>>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>>
>>> Add pm_runtime support to the TI Davinci VPIF driver.
>>>
>>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
>>> Cc: Hans Verkuil <hans.verkuil@cisco.com>
>>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>> Cc: Sakari Ailus <sakari.ailus@iki.fi>
>>> Cc: Sekhar Nori <nsekhar@ti.com>
>>> ---
>>> Changes for v2:
>>> 1: Removed use of clk API as pointed by Laurent and Sekhar.
>>>
>>> drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
>>> 1 files changed, 7 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
>>> index 28638a8..599cabb 100644
>>> --- a/drivers/media/platform/davinci/vpif.c
>>> +++ b/drivers/media/platform/davinci/vpif.c
>>> @@ -23,8 +23,8 @@
>>> #include <linux/spinlock.h>
>>> #include <linux/kernel.h>
>>> #include <linux/io.h>
>>> -#include <linux/clk.h>
>>> #include <linux/err.h>
>>> +#include <linux/pm_runtime.h>
>>> #include <linux/v4l2-dv-timings.h>
>>>
>>> #include <mach/hardware.h>
>>> @@ -44,7 +44,6 @@ static struct resource *res;
>>> spinlock_t vpif_lock;
>>>
>>> void __iomem *vpif_base;
>>> -struct clk *vpif_clk;
>>>
>>> /**
>>> * ch_params: video standard configuration parameters for vpif
>>> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
>>> goto fail;
>>> }
>>>
>>> - vpif_clk = clk_get(&pdev->dev, "vpif");
>>> - if (IS_ERR(vpif_clk)) {
>>> - status = PTR_ERR(vpif_clk);
>>> - goto clk_fail;
>>> - }
>>> - clk_prepare_enable(vpif_clk);
>>> + pm_runtime_enable(&pdev->dev);
>>> + pm_runtime_resume(&pdev->dev);
>>> +
>>> + pm_runtime_get(&pdev->dev);
>>
>> I don't see runtime-pm ops being registered. Can you explain how clock
>> prepare/unprepare is taken care by runtime-pm?
>>
> The pm_runtime API handles the clock management for you.
> For Davinci platform runtime PM support for clock management has
> been added (You can find it in arch/arm/mach-davinci/pm_domain.c)
> When runtime PM is enabled, the davinci runtime PM implementation will
> use the pm_clk layer to enable/disable clocks on demand.
I see. Thanks for the explanation.
>
> For more/detailed understanding you can go through the pm_runtime framework.
>
> Regards,
> --Prabhakar
--
Regards,
Rajagopal
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] davinci: vpif: add pm_runtime support
2013-04-01 6:36 [PATCH v2] davinci: vpif: add pm_runtime support Prabhakar lad
2013-04-01 7:17 ` Rajagopal Venkat
@ 2013-04-02 8:47 ` Hans Verkuil
2013-04-02 10:58 ` Prabhakar Lad
1 sibling, 1 reply; 6+ messages in thread
From: Hans Verkuil @ 2013-04-02 8:47 UTC (permalink / raw)
To: Prabhakar lad, Laurent Pinchart
Cc: DLOS, LMML, LKML, Mauro Carvalho Chehab, Sakari Ailus, Sekhar Nori
On Mon 1 April 2013 08:36:50 Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> Add pm_runtime support to the TI Davinci VPIF driver.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Sakari Ailus <sakari.ailus@iki.fi>
> Cc: Sekhar Nori <nsekhar@ti.com>
> ---
> Changes for v2:
> 1: Removed use of clk API as pointed by Laurent and Sekhar.
>
> drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
> 1 files changed, 7 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
> index 28638a8..599cabb 100644
> --- a/drivers/media/platform/davinci/vpif.c
> +++ b/drivers/media/platform/davinci/vpif.c
> @@ -23,8 +23,8 @@
> #include <linux/spinlock.h>
> #include <linux/kernel.h>
> #include <linux/io.h>
> -#include <linux/clk.h>
> #include <linux/err.h>
> +#include <linux/pm_runtime.h>
> #include <linux/v4l2-dv-timings.h>
>
> #include <mach/hardware.h>
> @@ -44,7 +44,6 @@ static struct resource *res;
> spinlock_t vpif_lock;
>
> void __iomem *vpif_base;
> -struct clk *vpif_clk;
>
> /**
> * ch_params: video standard configuration parameters for vpif
> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
> goto fail;
> }
>
> - vpif_clk = clk_get(&pdev->dev, "vpif");
> - if (IS_ERR(vpif_clk)) {
> - status = PTR_ERR(vpif_clk);
> - goto clk_fail;
> - }
> - clk_prepare_enable(vpif_clk);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_resume(&pdev->dev);
> +
> + pm_runtime_get(&pdev->dev);
pm_runtime_get() calls pm_runtime_resume() if needed, so is the call to resume()
really necessary?
Regards,
Hans
>
> spin_lock_init(&vpif_lock);
> dev_info(&pdev->dev, "vpif probe success\n");
> return 0;
>
> -clk_fail:
> - iounmap(vpif_base);
> fail:
> release_mem_region(res->start, res_len);
> return status;
> @@ -459,11 +454,6 @@ fail:
>
> static int vpif_remove(struct platform_device *pdev)
> {
> - if (vpif_clk) {
> - clk_disable_unprepare(vpif_clk);
> - clk_put(vpif_clk);
> - }
> -
> iounmap(vpif_base);
> release_mem_region(res->start, res_len);
> return 0;
> @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev)
> #ifdef CONFIG_PM
> static int vpif_suspend(struct device *dev)
> {
> - clk_disable_unprepare(vpif_clk);
> + pm_runtime_put(dev);
> return 0;
> }
>
> static int vpif_resume(struct device *dev)
> {
> - clk_prepare_enable(vpif_clk);
> + pm_runtime_get(dev);
> return 0;
> }
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] davinci: vpif: add pm_runtime support
2013-04-02 8:47 ` Hans Verkuil
@ 2013-04-02 10:58 ` Prabhakar Lad
0 siblings, 0 replies; 6+ messages in thread
From: Prabhakar Lad @ 2013-04-02 10:58 UTC (permalink / raw)
To: Hans Verkuil
Cc: Laurent Pinchart, DLOS, LMML, LKML, Mauro Carvalho Chehab,
Sakari Ailus, Sekhar Nori
Hi Hans,
On Tue, Apr 2, 2013 at 2:17 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
> On Mon 1 April 2013 08:36:50 Prabhakar lad wrote:
>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>
>> Add pm_runtime support to the TI Davinci VPIF driver.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
>> Cc: Hans Verkuil <hans.verkuil@cisco.com>
>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Cc: Sakari Ailus <sakari.ailus@iki.fi>
>> Cc: Sekhar Nori <nsekhar@ti.com>
>> ---
>> Changes for v2:
>> 1: Removed use of clk API as pointed by Laurent and Sekhar.
>>
>> drivers/media/platform/davinci/vpif.c | 24 +++++++-----------------
>> 1 files changed, 7 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
>> index 28638a8..599cabb 100644
>> --- a/drivers/media/platform/davinci/vpif.c
>> +++ b/drivers/media/platform/davinci/vpif.c
>> @@ -23,8 +23,8 @@
>> #include <linux/spinlock.h>
>> #include <linux/kernel.h>
>> #include <linux/io.h>
>> -#include <linux/clk.h>
>> #include <linux/err.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/v4l2-dv-timings.h>
>>
>> #include <mach/hardware.h>
>> @@ -44,7 +44,6 @@ static struct resource *res;
>> spinlock_t vpif_lock;
>>
>> void __iomem *vpif_base;
>> -struct clk *vpif_clk;
>>
>> /**
>> * ch_params: video standard configuration parameters for vpif
>> @@ -439,19 +438,15 @@ static int vpif_probe(struct platform_device *pdev)
>> goto fail;
>> }
>>
>> - vpif_clk = clk_get(&pdev->dev, "vpif");
>> - if (IS_ERR(vpif_clk)) {
>> - status = PTR_ERR(vpif_clk);
>> - goto clk_fail;
>> - }
>> - clk_prepare_enable(vpif_clk);
>> + pm_runtime_enable(&pdev->dev);
>> + pm_runtime_resume(&pdev->dev);
>> +
>> + pm_runtime_get(&pdev->dev);
>
> pm_runtime_get() calls pm_runtime_resume() if needed, so is the call to resume()
> really necessary?
>
Agreed I'll drop the call to pm_runtime_resume() and post a v3.
Regards,
--Prabhakar
> Regards,
>
> Hans
>
>>
>> spin_lock_init(&vpif_lock);
>> dev_info(&pdev->dev, "vpif probe success\n");
>> return 0;
>>
>> -clk_fail:
>> - iounmap(vpif_base);
>> fail:
>> release_mem_region(res->start, res_len);
>> return status;
>> @@ -459,11 +454,6 @@ fail:
>>
>> static int vpif_remove(struct platform_device *pdev)
>> {
>> - if (vpif_clk) {
>> - clk_disable_unprepare(vpif_clk);
>> - clk_put(vpif_clk);
>> - }
>> -
>> iounmap(vpif_base);
>> release_mem_region(res->start, res_len);
>> return 0;
>> @@ -472,13 +462,13 @@ static int vpif_remove(struct platform_device *pdev)
>> #ifdef CONFIG_PM
>> static int vpif_suspend(struct device *dev)
>> {
>> - clk_disable_unprepare(vpif_clk);
>> + pm_runtime_put(dev);
>> return 0;
>> }
>>
>> static int vpif_resume(struct device *dev)
>> {
>> - clk_prepare_enable(vpif_clk);
>> + pm_runtime_get(dev);
>> return 0;
>> }
>>
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-04-02 10:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-01 6:36 [PATCH v2] davinci: vpif: add pm_runtime support Prabhakar lad
2013-04-01 7:17 ` Rajagopal Venkat
2013-04-01 8:23 ` Prabhakar Lad
2013-04-01 8:52 ` Rajagopal Venkat
2013-04-02 8:47 ` Hans Verkuil
2013-04-02 10:58 ` Prabhakar Lad
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®