mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 1/4] net: ethernet: sun: initialize variables directly
@ 2013-05-17 15:07 Emilio López
  2013-05-17 15:07 ` [PATCH 2/4] net: ethernet: apple: " Emilio López
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Emilio López @ 2013-05-17 15:07 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

 drivers/net/ethernet/sun/sunbmac.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index 0549759..aabb40a 100644
--- a/drivers/net/ethernet/sun/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -1017,10 +1017,7 @@ static void bigmac_set_multicast(struct net_device *dev)
 		tmp |= BIGMAC_RXCFG_PMISC;
 		sbus_writel(tmp, bregs + BMAC_RXCFG);
 	} else {
-		u16 hash_table[4];
-
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
+		u16 hash_table[4] = {0};
 
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 2/4] net: ethernet: apple: initialize variables directly
  2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
@ 2013-05-17 15:07 ` Emilio López
  2013-05-17 20:23   ` David Miller
  2013-05-17 15:07 ` [PATCH 3/4] net: ethernet: davicom: dm9000: " Emilio López
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 14+ messages in thread
From: Emilio López @ 2013-05-17 15:07 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

 drivers/net/ethernet/apple/bmac.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index f36bbd6..253030c 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1030,14 +1030,12 @@ static void bmac_set_multicast(struct net_device *dev)
 		rx_cfg |= RxPromiscEnable;
 		bmwrite(dev, RXCFG, rx_cfg);
 	} else {
-		u16 hash_table[4];
+		u16 hash_table[4] = {0};
 
 		rx_cfg = bmread(dev, RXCFG);
 		rx_cfg &= ~RxPromiscEnable;
 		bmwrite(dev, RXCFG, rx_cfg);
 
-		for(i = 0; i < 4; i++) hash_table[i] = 0;
-
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
 			crc >>= 26;
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 3/4] net: ethernet: davicom: dm9000: initialize variables directly
  2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
  2013-05-17 15:07 ` [PATCH 2/4] net: ethernet: apple: " Emilio López
@ 2013-05-17 15:07 ` Emilio López
  2013-05-17 15:07 ` [PATCH 4/4] net: ethernet: korina: " Emilio López
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 14+ messages in thread
From: Emilio López @ 2013-05-17 15:07 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

 drivers/net/ethernet/davicom/dm9000.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 9105465..e4ed05e 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -827,7 +827,7 @@ dm9000_hash_table_unlocked(struct net_device *dev)
 	struct netdev_hw_addr *ha;
 	int i, oft;
 	u32 hash_val;
-	u16 hash_table[4];
+	u16 hash_table[4] = {0, 0, 0, 0x8000}; /* broadcast address */
 	u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
@@ -835,13 +835,6 @@ dm9000_hash_table_unlocked(struct net_device *dev)
 	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
 		iow(db, oft, dev->dev_addr[i]);
 
-	/* Clear Hash Table */
-	for (i = 0; i < 4; i++)
-		hash_table[i] = 0x0;
-
-	/* broadcast address */
-	hash_table[3] = 0x8000;
-
 	if (dev->flags & IFF_PROMISC)
 		rcr |= RCR_PRMSC;
 
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 4/4] net: ethernet: korina: initialize variables directly
  2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
  2013-05-17 15:07 ` [PATCH 2/4] net: ethernet: apple: " Emilio López
  2013-05-17 15:07 ` [PATCH 3/4] net: ethernet: davicom: dm9000: " Emilio López
@ 2013-05-17 15:07 ` Emilio López
  2013-05-17 20:23 ` [PATCH 1/4] net: ethernet: sun: " David Miller
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
  4 siblings, 0 replies; 14+ messages in thread
From: Emilio López @ 2013-05-17 15:07 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

 drivers/net/ethernet/korina.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index 5409fe8..3756d95 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -495,12 +495,9 @@ static void korina_multicast_list(struct net_device *dev)
 
 	/* Build the hash table */
 	if (netdev_mc_count(dev) > 4) {
-		u16 hash_table[4];
+		u16 hash_table[4] = {0};
 		u32 crc;
 
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
-
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
 			crc >>= 26;
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: ethernet: sun: initialize variables directly
  2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
                   ` (2 preceding siblings ...)
  2013-05-17 15:07 ` [PATCH 4/4] net: ethernet: korina: " Emilio López
@ 2013-05-17 20:23 ` David Miller
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
  4 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:23 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel

From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 17 May 2013 12:07:45 -0300

> Clean up the code a bit to initialize the variables directly when
> defining them.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

Poorly styled, should be:

	u16 hash_table[4] = { 0 };

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/4] net: ethernet: apple: initialize variables directly
  2013-05-17 15:07 ` [PATCH 2/4] net: ethernet: apple: " Emilio López
@ 2013-05-17 20:23   ` David Miller
  0 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:23 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel

From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 17 May 2013 12:07:46 -0300

> Clean up the code a bit to initialize the variables directly when
> defining them.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

Same problem as patch one, poorly styled, please fix these
problems and resubmit the entire series.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 1/4] net: ethernet: sun: initialize variables directly
  2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
                   ` (3 preceding siblings ...)
  2013-05-17 20:23 ` [PATCH 1/4] net: ethernet: sun: " David Miller
@ 2013-05-17 20:42 ` Emilio López
  2013-05-17 20:42   ` [PATCH v2 2/4] net: ethernet: apple: " Emilio López
                     ` (3 more replies)
  4 siblings, 4 replies; 14+ messages in thread
From: Emilio López @ 2013-05-17 20:42 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

Changes from v1:
  - {0} -> { 0 } as suggested by David Miller

 drivers/net/ethernet/sun/sunbmac.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index 0549759..aabb40a 100644
--- a/drivers/net/ethernet/sun/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -1017,10 +1017,7 @@ static void bigmac_set_multicast(struct net_device *dev)
 		tmp |= BIGMAC_RXCFG_PMISC;
 		sbus_writel(tmp, bregs + BMAC_RXCFG);
 	} else {
-		u16 hash_table[4];
-
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
+		u16 hash_table[4] = { 0 };
 
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 2/4] net: ethernet: apple: initialize variables directly
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
@ 2013-05-17 20:42   ` Emilio López
  2013-05-17 20:59     ` David Miller
  2013-05-17 20:42   ` [PATCH v2 3/4] net: ethernet: davicom: dm9000: " Emilio López
                     ` (2 subsequent siblings)
  3 siblings, 1 reply; 14+ messages in thread
From: Emilio López @ 2013-05-17 20:42 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

Changes from v1:
  - {0} -> { 0 } as suggested by David Miller

 drivers/net/ethernet/apple/bmac.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index f36bbd6..253030c 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1030,14 +1030,12 @@ static void bmac_set_multicast(struct net_device *dev)
 		rx_cfg |= RxPromiscEnable;
 		bmwrite(dev, RXCFG, rx_cfg);
 	} else {
-		u16 hash_table[4];
+		u16 hash_table[4] = { 0 };
 
 		rx_cfg = bmread(dev, RXCFG);
 		rx_cfg &= ~RxPromiscEnable;
 		bmwrite(dev, RXCFG, rx_cfg);
 
-		for(i = 0; i < 4; i++) hash_table[i] = 0;
-
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
 			crc >>= 26;
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 3/4] net: ethernet: davicom: dm9000: initialize variables directly
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
  2013-05-17 20:42   ` [PATCH v2 2/4] net: ethernet: apple: " Emilio López
@ 2013-05-17 20:42   ` Emilio López
  2013-05-17 20:59     ` David Miller
  2013-05-17 20:42   ` [PATCH v2 4/4] net: ethernet: korina: " Emilio López
  2013-05-17 20:59   ` [PATCH v2 1/4] net: ethernet: sun: " David Miller
  3 siblings, 1 reply; 14+ messages in thread
From: Emilio López @ 2013-05-17 20:42 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

Changes from v1:
  - {0} -> { 0 } as suggested by David Miller

 drivers/net/ethernet/davicom/dm9000.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 9105465..e4ed05e 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -827,7 +827,7 @@ dm9000_hash_table_unlocked(struct net_device *dev)
 	struct netdev_hw_addr *ha;
 	int i, oft;
 	u32 hash_val;
-	u16 hash_table[4];
+	u16 hash_table[4] = { 0, 0, 0, 0x8000 }; /* broadcast address */
 	u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
@@ -835,13 +835,6 @@ dm9000_hash_table_unlocked(struct net_device *dev)
 	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
 		iow(db, oft, dev->dev_addr[i]);
 
-	/* Clear Hash Table */
-	for (i = 0; i < 4; i++)
-		hash_table[i] = 0x0;
-
-	/* broadcast address */
-	hash_table[3] = 0x8000;
-
 	if (dev->flags & IFF_PROMISC)
 		rcr |= RCR_PRMSC;
 
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 4/4] net: ethernet: korina: initialize variables directly
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
  2013-05-17 20:42   ` [PATCH v2 2/4] net: ethernet: apple: " Emilio López
  2013-05-17 20:42   ` [PATCH v2 3/4] net: ethernet: davicom: dm9000: " Emilio López
@ 2013-05-17 20:42   ` Emilio López
  2013-05-17 20:59     ` David Miller
  2013-05-17 20:59   ` [PATCH v2 1/4] net: ethernet: sun: " David Miller
  3 siblings, 1 reply; 14+ messages in thread
From: Emilio López @ 2013-05-17 20:42 UTC (permalink / raw)
  To: davem; +Cc: netdev, linux-kernel, Emilio López

Clean up the code a bit to initialize the variables directly when
defining them.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Please note that this patch is untested.

Changes from v1:
  - {0} -> { 0 } as suggested by David Miller

 drivers/net/ethernet/korina.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index 5409fe8..3756d95 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -495,12 +495,9 @@ static void korina_multicast_list(struct net_device *dev)
 
 	/* Build the hash table */
 	if (netdev_mc_count(dev) > 4) {
-		u16 hash_table[4];
+		u16 hash_table[4] = { 0 };
 		u32 crc;
 
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
-
 		netdev_for_each_mc_addr(ha, dev) {
 			crc = ether_crc_le(6, ha->addr);
 			crc >>= 26;
-- 
1.8.2.3


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 1/4] net: ethernet: sun: initialize variables directly
  2013-05-17 20:42 ` [PATCH v2 " Emilio López
                     ` (2 preceding siblings ...)
  2013-05-17 20:42   ` [PATCH v2 4/4] net: ethernet: korina: " Emilio López
@ 2013-05-17 20:59   ` David Miller
  3 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:59 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel

From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 17 May 2013 17:42:53 -0300

> Clean up the code a bit to initialize the variables directly when
> defining them.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

Applied.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 2/4] net: ethernet: apple: initialize variables directly
  2013-05-17 20:42   ` [PATCH v2 2/4] net: ethernet: apple: " Emilio López
@ 2013-05-17 20:59     ` David Miller
  0 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:59 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel

From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 17 May 2013 17:42:54 -0300

> Clean up the code a bit to initialize the variables directly when
> defining them.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

Applied.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 3/4] net: ethernet: davicom: dm9000: initialize variables directly
  2013-05-17 20:42   ` [PATCH v2 3/4] net: ethernet: davicom: dm9000: " Emilio López
@ 2013-05-17 20:59     ` David Miller
  0 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:59 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel


Applied.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 4/4] net: ethernet: korina: initialize variables directly
  2013-05-17 20:42   ` [PATCH v2 4/4] net: ethernet: korina: " Emilio López
@ 2013-05-17 20:59     ` David Miller
  0 siblings, 0 replies; 14+ messages in thread
From: David Miller @ 2013-05-17 20:59 UTC (permalink / raw)
  To: emilio; +Cc: netdev, linux-kernel

From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 17 May 2013 17:42:56 -0300

> Clean up the code a bit to initialize the variables directly when
> defining them.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

Applied.

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2013-05-17 20:59 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-17 15:07 [PATCH 1/4] net: ethernet: sun: initialize variables directly Emilio López
2013-05-17 15:07 ` [PATCH 2/4] net: ethernet: apple: " Emilio López
2013-05-17 20:23   ` David Miller
2013-05-17 15:07 ` [PATCH 3/4] net: ethernet: davicom: dm9000: " Emilio López
2013-05-17 15:07 ` [PATCH 4/4] net: ethernet: korina: " Emilio López
2013-05-17 20:23 ` [PATCH 1/4] net: ethernet: sun: " David Miller
2013-05-17 20:42 ` [PATCH v2 " Emilio López
2013-05-17 20:42   ` [PATCH v2 2/4] net: ethernet: apple: " Emilio López
2013-05-17 20:59     ` David Miller
2013-05-17 20:42   ` [PATCH v2 3/4] net: ethernet: davicom: dm9000: " Emilio López
2013-05-17 20:59     ` David Miller
2013-05-17 20:42   ` [PATCH v2 4/4] net: ethernet: korina: " Emilio López
2013-05-17 20:59     ` David Miller
2013-05-17 20:59   ` [PATCH v2 1/4] net: ethernet: sun: " David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®