* [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
@ 2013-06-13 4:30 J Keerthy
2013-06-13 16:49 ` J, KEERTHY
2013-06-17 6:21 ` J, KEERTHY
0 siblings, 2 replies; 3+ messages in thread
From: J Keerthy @ 2013-06-13 4:30 UTC (permalink / raw)
To: b-cousson, devicetree-discuss
Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren,
swarren, sameo, gg, lee.jones, J Keerthy
This patch adds Palmas MFD node and the regulator nodes for OMAP5.
The node definitions are based on: https://lkml.org/lkml/2013/6/6/25
Boot tested on omap5-uevm board.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
V6:
Changed the order of properties.
V5:
Corrected the IRQ_TYPE flag for OMAP5 board.
V4:
Removed splitting Palmas node.
V3:
Moved the entire Palmas device tree node to board file.
arch/arm/boot/dts/omap5-uevm.dts | 167 ++++++++++++++++++++++++++++++++++++++
1 files changed, 167 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 927db1e..3d0b7b6 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -8,6 +8,8 @@
/dts-v1/;
#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "TI OMAP5 uEVM board";
@@ -254,6 +256,171 @@
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ compatible = "ti,palmas";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ interrupt-parent = <&gic>;
+ reg = <0x48>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-name = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_reg: smps10 {
+ regulator-name = "smps10";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
&i2c5 {
--
1.7.5.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
2013-06-13 4:30 [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes J Keerthy
@ 2013-06-13 16:49 ` J, KEERTHY
2013-06-17 6:21 ` J, KEERTHY
1 sibling, 0 replies; 3+ messages in thread
From: J, KEERTHY @ 2013-06-13 16:49 UTC (permalink / raw)
To: Cousson, Benoit
Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren,
swarren, sameo, gg, lee.jones, devicetree-discuss
Hi Benoit,
> -----Original Message-----
> From: J, KEERTHY
> Sent: Thursday, June 13, 2013 10:00 AM
> To: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org
> Cc: linux-omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> ldewangan@nvidia.com; grant.likely@secretlab.ca; swarren@wwwdotorg.org;
> swarren@nvidia.com; sameo@linux.intel.com; gg@slimlogic.co.uk;
> lee.jones@linaro.org; J, KEERTHY
> Subject: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator
> nodes
>
> This patch adds Palmas MFD node and the regulator nodes for OMAP5.
>
> The node definitions are based on: https://lkml.org/lkml/2013/6/6/25
>
> Boot tested on omap5-uevm board.
Could you please pull this patch?
Regards,
Keerthy
>
> Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
> Signed-off-by: J Keerthy <j-keerthy@ti.com>
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> ---
> V6:
> Changed the order of properties.
>
> V5:
> Corrected the IRQ_TYPE flag for OMAP5 board.
>
> V4:
> Removed splitting Palmas node.
>
> V3:
> Moved the entire Palmas device tree node to board file.
>
> arch/arm/boot/dts/omap5-uevm.dts | 167
> ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 167 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5-uevm.dts
> b/arch/arm/boot/dts/omap5-uevm.dts
> index 927db1e..3d0b7b6 100644
> --- a/arch/arm/boot/dts/omap5-uevm.dts
> +++ b/arch/arm/boot/dts/omap5-uevm.dts
> @@ -8,6 +8,8 @@
> /dts-v1/;
>
> #include "omap5.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> model = "TI OMAP5 uEVM board";
> @@ -254,6 +256,171 @@
> pinctrl-0 = <&i2c1_pins>;
>
> clock-frequency = <400000>;
> +
> + palmas: palmas@48 {
> + compatible = "ti,palmas";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
> + interrupt-parent = <&gic>;
> + reg = <0x48>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + palmas_pmic {
> + compatible = "ti,palmas-pmic";
> + interrupt-parent = <&palmas>;
> + interrupts = <14 IRQ_TYPE_NONE>;
> + interrupt-name = "short-irq";
> +
> + ti,ldo6-vibrator;
> +
> + regulators {
> + smps123_reg: smps123 {
> + regulator-name = "smps123";
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps45_reg: smps45 {
> + regulator-name = "smps45";
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1310000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps6_reg: smps6 {
> + regulator-name = "smps6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps7_reg: smps7 {
> + regulator-name = "smps7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps8_reg: smps8 {
> + regulator-name = "smps8";
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1310000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps9_reg: smps9 {
> + regulator-name = "smps9";
> + regulator-min-microvolt = <2100000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-always-on;
> + regulator-boot-on;
> + ti,smps-range = <0x80>;
> + };
> +
> + smps10_reg: smps10 {
> + regulator-name = "smps10";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo1_reg: ldo1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo4_reg: ldo4 {
> + regulator-name = "ldo4";
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo5_reg: ldo5 {
> + regulator-name = "ldo5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo6_reg: ldo6 {
> + regulator-name = "ldo6";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo7_reg: ldo7 {
> + regulator-name = "ldo7";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo8_reg: ldo8 {
> + regulator-name = "ldo8";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + regulator-name = "ldo9";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldoln_reg: ldoln {
> + regulator-name = "ldoln";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldousb_reg: ldousb {
> + regulator-name = "ldousb";
> + regulator-min-microvolt = <3250000>;
> + regulator-max-microvolt = <3250000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> };
>
> &i2c5 {
> --
> 1.7.5.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
2013-06-13 4:30 [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes J Keerthy
2013-06-13 16:49 ` J, KEERTHY
@ 2013-06-17 6:21 ` J, KEERTHY
1 sibling, 0 replies; 3+ messages in thread
From: J, KEERTHY @ 2013-06-17 6:21 UTC (permalink / raw)
To: Cousson, Benoit
Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren,
swarren, sameo, gg, lee.jones, devicetree-discuss
Hi Benoit,
> -----Original Message-----
> From: J, KEERTHY
> Sent: Thursday, June 13, 2013 10:19 PM
> To: Cousson, Benoit
> Cc: linux-omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> ldewangan@nvidia.com; grant.likely@secretlab.ca; swarren@wwwdotorg.org;
> swarren@nvidia.com; sameo@linux.intel.com; gg@slimlogic.co.uk;
> lee.jones@linaro.org; devicetree-discuss@lists.ozlabs.org
> Subject: RE: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and
> regulator nodes
>
> Hi Benoit,
>
>
> > -----Original Message-----
> > From: J, KEERTHY
> > Sent: Thursday, June 13, 2013 10:00 AM
> > To: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org
> > Cc: linux-omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> > ldewangan@nvidia.com; grant.likely@secretlab.ca;
> > swarren@wwwdotorg.org; swarren@nvidia.com; sameo@linux.intel.com;
> > gg@slimlogic.co.uk; lee.jones@linaro.org; J, KEERTHY
> > Subject: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and
> regulator
> > nodes
> >
> > This patch adds Palmas MFD node and the regulator nodes for OMAP5.
> >
> > The node definitions are based on: https://lkml.org/lkml/2013/6/6/25
> >
> > Boot tested on omap5-uevm board.
>
> Could you please pull this patch?
>
A gentle ping on this patch.
> Regards,
> Keerthy
Regards,
Keerthy
>
> >
> > Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
> > Signed-off-by: J Keerthy <j-keerthy@ti.com>
> > Reviewed-by: Stephen Warren <swarren@nvidia.com>
> > ---
> > V6:
> > Changed the order of properties.
> >
> > V5:
> > Corrected the IRQ_TYPE flag for OMAP5 board.
> >
> > V4:
> > Removed splitting Palmas node.
> >
> > V3:
> > Moved the entire Palmas device tree node to board file.
> >
> > arch/arm/boot/dts/omap5-uevm.dts | 167
> > ++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 167 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap5-uevm.dts
> > b/arch/arm/boot/dts/omap5-uevm.dts
> > index 927db1e..3d0b7b6 100644
> > --- a/arch/arm/boot/dts/omap5-uevm.dts
> > +++ b/arch/arm/boot/dts/omap5-uevm.dts
> > @@ -8,6 +8,8 @@
> > /dts-v1/;
> >
> > #include "omap5.dtsi"
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >
> > / {
> > model = "TI OMAP5 uEVM board";
> > @@ -254,6 +256,171 @@
> > pinctrl-0 = <&i2c1_pins>;
> >
> > clock-frequency = <400000>;
> > +
> > + palmas: palmas@48 {
> > + compatible = "ti,palmas";
> > + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
> > + interrupt-parent = <&gic>;
> > + reg = <0x48>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > +
> > + palmas_pmic {
> > + compatible = "ti,palmas-pmic";
> > + interrupt-parent = <&palmas>;
> > + interrupts = <14 IRQ_TYPE_NONE>;
> > + interrupt-name = "short-irq";
> > +
> > + ti,ldo6-vibrator;
> > +
> > + regulators {
> > + smps123_reg: smps123 {
> > + regulator-name = "smps123";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps45_reg: smps45 {
> > + regulator-name = "smps45";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps6_reg: smps6 {
> > + regulator-name = "smps6";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps7_reg: smps7 {
> > + regulator-name = "smps7";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps8_reg: smps8 {
> > + regulator-name = "smps8";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps9_reg: smps9 {
> > + regulator-name = "smps9";
> > + regulator-min-microvolt = <2100000>;
> > + regulator-max-microvolt = <2100000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + ti,smps-range = <0x80>;
> > + };
> > +
> > + smps10_reg: smps10 {
> > + regulator-name = "smps10";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo1_reg: ldo1 {
> > + regulator-name = "ldo1";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo2_reg: ldo2 {
> > + regulator-name = "ldo2";
> > + regulator-min-microvolt = <2900000>;
> > + regulator-max-microvolt = <2900000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo3_reg: ldo3 {
> > + regulator-name = "ldo3";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo4_reg: ldo4 {
> > + regulator-name = "ldo4";
> > + regulator-min-microvolt = <2200000>;
> > + regulator-max-microvolt = <2200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo5_reg: ldo5 {
> > + regulator-name = "ldo5";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo6_reg: ldo6 {
> > + regulator-name = "ldo6";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo7_reg: ldo7 {
> > + regulator-name = "ldo7";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo8_reg: ldo8 {
> > + regulator-name = "ldo8";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo9_reg: ldo9 {
> > + regulator-name = "ldo9";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldoln_reg: ldoln {
> > + regulator-name = "ldoln";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldousb_reg: ldousb {
> > + regulator-name = "ldousb";
> > + regulator-min-microvolt = <3250000>;
> > + regulator-max-microvolt = <3250000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > + };
> > + };
> > + };
> > };
> >
> > &i2c5 {
> > --
> > 1.7.5.4
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-06-17 6:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-13 4:30 [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes J Keerthy
2013-06-13 16:49 ` J, KEERTHY
2013-06-17 6:21 ` J, KEERTHY
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®