From: Yadwinder Singh Brar <yadi.brar@samsung.com>
To: linux-kernel@vger.kernel.org
Cc: sbkim73@samsung.com, broonie@kernel.org, lgirdwood@gmail.com,
sameo@linux.intel.com, rob.herring@calxeda.com,
grant.likely@linaro.org, sachin.kamat@linaro.org,
yadi.brar01@gmail.com,
Yadwinder Singh Brar <yadi.brar@samsung.com>
Subject: [v2 PATCH 3/6] regulator: s2mps11: Add DT support
Date: Sat, 29 Jun 2013 18:21:17 +0530 [thread overview]
Message-ID: <1372510280-31931-4-git-send-email-yadi.brar@samsung.com> (raw)
In-Reply-To: <1372510280-31931-1-git-send-email-yadi.brar@samsung.com>
This patch adds DT support for parsing regulators constraints for parent(mfd)
node and moves some common intialising code out of loop while registering.
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
---
drivers/regulator/s2mps11.c | 48 +++++++++++++++++++++++++++++++++---------
1 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4bebcb6..4157759 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -20,9 +20,12 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
+#define S2MPS11_REGULATOR_CNT ARRAY_SIZE(regulators)
+
struct s2mps11_info {
struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX];
@@ -407,22 +410,38 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct of_regulator_match rdata[S2MPS11_REGULATOR_MAX];
+ struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mps11_info *s2mps11;
int i, ret;
unsigned char ramp_enable, ramp_reg = 0;
- if (!pdata) {
- dev_err(pdev->dev.parent, "Platform data not supplied\n");
- return -ENODEV;
- }
-
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
GFP_KERNEL);
if (!s2mps11)
return -ENOMEM;
- platform_set_drvdata(pdev, s2mps11);
+ if (!iodev->dev->of_node)
+ goto p_data;
+
+ for (i = 0; i < S2MPS11_REGULATOR_CNT; i++)
+ rdata[i].name = regulators[i].name;
+
+ reg_np = of_find_node_by_name(iodev->dev->of_node, "regulators");
+ if (!reg_np) {
+ dev_err(&pdev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ of_regulator_match(&pdev->dev, reg_np, rdata, S2MPS11_REGULATOR_MAX);
+
+ goto common_reg;
+p_data:
+ if (!pdata) {
+ dev_err(pdev->dev.parent, "Platform data not supplied\n");
+ return -ENODEV;
+ }
s2mps11->ramp_delay2 = pdata->buck2_ramp_delay;
s2mps11->ramp_delay34 = pdata->buck34_ramp_delay;
@@ -454,12 +473,19 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
ramp_reg |= get_ramp_delay(s2mps11->ramp_delay9);
sec_reg_write(iodev, S2MPS11_REG_RAMP_BUCK, ramp_reg);
- for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
+common_reg:
+ platform_set_drvdata(pdev, s2mps11);
- config.dev = &pdev->dev;
- config.regmap = iodev->regmap;
- config.init_data = pdata->regulators[i].initdata;
- config.driver_data = s2mps11;
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap;
+ config.driver_data = s2mps11;
+ for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
+ if (!reg_np) {
+ config.init_data = pdata->regulators[i].initdata;
+ } else {
+ config.init_data = rdata[i].init_data;
+ config.of_node = rdata[i].of_node;
+ }
s2mps11->rdev[i] = regulator_register(®ulators[i], &config);
if (IS_ERR(s2mps11->rdev[i])) {
--
1.7.0.4
next prev parent reply other threads:[~2013-07-08 13:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-29 12:51 [v2 PATCH 0/6] Add DT support for s2mps11 Yadwinder Singh Brar
2013-06-29 12:51 ` [v2 PATCH 1/6] regulator: core: Add support for disabling ramp delay Yadwinder Singh Brar
2013-07-08 13:19 ` Mark Brown
2013-06-29 12:51 ` [v2 PATCH 2/6] regulator: s2mps11: Implement set_ramp_rate callback for bucks Yadwinder Singh Brar
2013-07-08 13:26 ` Mark Brown
2013-06-29 12:51 ` Yadwinder Singh Brar [this message]
2013-06-29 12:51 ` [v2 PATCH 4/6] regulator: s2mps11: Convert driver completely to use set_ramp_delay callback Yadwinder Singh Brar
2013-06-29 12:51 ` [v2 PATCH 5/6] regulator: core: Remove redundant checks Yadwinder Singh Brar
2013-07-08 13:21 ` Mark Brown
2013-06-29 12:51 ` [v2 PATCH 6/6] mfd: s2mps11: Add device tree support Yadwinder Singh Brar
2013-07-08 13:28 ` Mark Brown
2013-07-08 13:41 ` Yadwinder Singh Brar
2013-07-11 11:06 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372510280-31931-4-git-send-email-yadi.brar@samsung.com \
--to=yadi.brar@samsung.com \
--cc=broonie@kernel.org \
--cc=grant.likely@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=sachin.kamat@linaro.org \
--cc=sameo@linux.intel.com \
--cc=sbkim73@samsung.com \
--cc=yadi.brar01@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®