From: Jenny TC <jenny.tc@intel.com>
To: linux-kernel@vger.kernel.org
Cc: Anton Vorontsov <cbouatmailru@gmail.com>,
Anton Vorontsov <anton.vorontsov@linaro.org>,
Jenny TC <jenny.tc@intel.com>
Subject: [PATCH 1/3] power_supply: Add charger control properties
Date: Sun, 14 Jul 2013 23:07:45 +0530 [thread overview]
Message-ID: <1373823466-2581-1-git-send-email-jenny.tc@intel.com> (raw)
The battery charger needs to have control path along
with the reporting charger properties. In existing solutions
this is implemented using regulator framework. A regulator
framework doesn't fit a charger driver requirement because of the
following reason
Charger needs support two paths - charger path (charger to platform)
and charging (charger to battery).Disabling the charging path alone
(eg over battery temperature) will allow the platform to work with
power from charger without discharging the battery. And the charger
may need to be disabled completely based on the charger temperature
or the platform temperature. Charger has more than one pair of
voltage/current to control (CC,CV,INLMT).These features will not
directly fit in the regulator framework. Since the charger driver
sits in the power supply subsystem it make sense to add the properties
to control the charger.
Signed-off-by: Jenny TC <jenny.tc@intel.com>
---
drivers/power/power_supply_sysfs.c | 8 ++++++++
include/linux/power_supply.h | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 29178f7..643971c 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -167,6 +167,7 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(constant_charge_voltage_max),
POWER_SUPPLY_ATTR(charge_control_limit),
POWER_SUPPLY_ATTR(charge_control_limit_max),
+ POWER_SUPPLY_ATTR(input_cur_limit),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
@@ -178,6 +179,8 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(capacity_alert_max),
POWER_SUPPLY_ATTR(capacity_level),
POWER_SUPPLY_ATTR(temp),
+ POWER_SUPPLY_ATTR(max_temp),
+ POWER_SUPPLY_ATTR(min_temp),
POWER_SUPPLY_ATTR(temp_alert_min),
POWER_SUPPLY_ATTR(temp_alert_max),
POWER_SUPPLY_ATTR(temp_ambient),
@@ -189,6 +192,11 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(time_to_full_avg),
POWER_SUPPLY_ATTR(type),
POWER_SUPPLY_ATTR(scope),
+ POWER_SUPPLY_ATTR(charge_term_cur),
+ POWER_SUPPLY_ATTR(enable_charging),
+ POWER_SUPPLY_ATTR(enable_charger),
+ POWER_SUPPLY_ATTR(cable_type),
+ POWER_SUPPLY_ATTR(priority),
/* Properties of type `const char *' */
POWER_SUPPLY_ATTR(model_name),
POWER_SUPPLY_ATTR(manufacturer),
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 804b906..1265131 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -118,6 +118,7 @@ enum power_supply_property {
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+ POWER_SUPPLY_PROP_INLMT,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
@@ -129,6 +130,8 @@ enum power_supply_property {
POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MAX_TEMP,
+ POWER_SUPPLY_PROP_MIN_TEMP,
POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
@@ -140,6 +143,11 @@ enum power_supply_property {
POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CUR,
+ POWER_SUPPLY_PROP_ENABLE_CHARGING,
+ POWER_SUPPLY_PROP_ENABLE_CHARGER,
+ POWER_SUPPLY_PROP_CABLE_TYPE,
+ POWER_SUPPLY_PROP_PRIORITY,
/* Properties of type `const char *' */
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
--
1.7.9.5
next reply other threads:[~2013-07-14 9:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-14 17:37 Jenny TC [this message]
2013-08-09 22:23 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373823466-2581-1-git-send-email-jenny.tc@intel.com \
--to=jenny.tc@intel.com \
--cc=anton.vorontsov@linaro.org \
--cc=cbouatmailru@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®