mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 1/3] power_supply: Add charger control properties
@ 2013-07-14 17:37 Jenny TC
  2013-08-09 22:23 ` Anton Vorontsov
  0 siblings, 1 reply; 2+ messages in thread
From: Jenny TC @ 2013-07-14 17:37 UTC (permalink / raw)
  To: linux-kernel; +Cc: Anton Vorontsov, Anton Vorontsov, Jenny TC

The battery charger needs to have control path along
with the reporting charger properties. In existing solutions
this is implemented using regulator framework. A regulator
framework doesn't fit a charger driver requirement because of the
following reason
Charger needs support two paths - charger path (charger to platform)
and charging (charger to battery).Disabling the charging path alone
(eg over battery temperature) will allow the platform to work with
power from charger without discharging the battery. And the charger
may need to be disabled completely based on the charger temperature
or the platform temperature. Charger has more than one pair of
voltage/current to control (CC,CV,INLMT).These features will not
directly fit in the regulator framework. Since the charger driver
sits in the power supply subsystem it make sense to add the properties
to control the charger.

Signed-off-by: Jenny TC <jenny.tc@intel.com>
---
 drivers/power/power_supply_sysfs.c |    8 ++++++++
 include/linux/power_supply.h       |    8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 29178f7..643971c 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -167,6 +167,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(constant_charge_voltage_max),
 	POWER_SUPPLY_ATTR(charge_control_limit),
 	POWER_SUPPLY_ATTR(charge_control_limit_max),
+	POWER_SUPPLY_ATTR(input_cur_limit),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
@@ -178,6 +179,8 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(capacity_alert_max),
 	POWER_SUPPLY_ATTR(capacity_level),
 	POWER_SUPPLY_ATTR(temp),
+	POWER_SUPPLY_ATTR(max_temp),
+	POWER_SUPPLY_ATTR(min_temp),
 	POWER_SUPPLY_ATTR(temp_alert_min),
 	POWER_SUPPLY_ATTR(temp_alert_max),
 	POWER_SUPPLY_ATTR(temp_ambient),
@@ -189,6 +192,11 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(time_to_full_avg),
 	POWER_SUPPLY_ATTR(type),
 	POWER_SUPPLY_ATTR(scope),
+	POWER_SUPPLY_ATTR(charge_term_cur),
+	POWER_SUPPLY_ATTR(enable_charging),
+	POWER_SUPPLY_ATTR(enable_charger),
+	POWER_SUPPLY_ATTR(cable_type),
+	POWER_SUPPLY_ATTR(priority),
 	/* Properties of type `const char *' */
 	POWER_SUPPLY_ATTR(model_name),
 	POWER_SUPPLY_ATTR(manufacturer),
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 804b906..1265131 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -118,6 +118,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
 	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+	POWER_SUPPLY_PROP_INLMT,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
@@ -129,6 +130,8 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_MAX_TEMP,
+	POWER_SUPPLY_PROP_MIN_TEMP,
 	POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
 	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
@@ -140,6 +143,11 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
 	POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
 	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CUR,
+	POWER_SUPPLY_PROP_ENABLE_CHARGING,
+	POWER_SUPPLY_PROP_ENABLE_CHARGER,
+	POWER_SUPPLY_PROP_CABLE_TYPE,
+	POWER_SUPPLY_PROP_PRIORITY,
 	/* Properties of type `const char *' */
 	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_MANUFACTURER,
-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2013-08-09 22:28 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-14 17:37 [PATCH 1/3] power_supply: Add charger control properties Jenny TC
2013-08-09 22:23 ` Anton Vorontsov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®