From: Scott Wood <scottwood@freescale.com>
To: Yoder Stuart-B08248 <B08248@freescale.com>
Cc: Kim Phillips <kim.phillips@linaro.org>,
Wood Scott-B07421 <B07421@freescale.com>,
"alex.williamson@redhat.com" <alex.williamson@redhat.com>,
Bhushan Bharat-R65777 <R65777@freescale.com>,
"christoffer.dall@linaro.org" <christoffer.dall@linaro.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"a.motakis@virtualopensystems.com"
<a.motakis@virtualopensystems.com>,
"agraf@suse.de" <agraf@suse.de>,
Sethi Varun-B16395 <B16395@freescale.com>,
"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
"santosh.shukla@linaro.org" <santosh.shukla@linaro.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Subject: Re: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit binding via sysfs only
Date: Mon, 14 Oct 2013 12:13:48 -0500 [thread overview]
Message-ID: <1381770828.7979.606.camel@snotra.buserror.net> (raw)
In-Reply-To: <9F6FE96B71CF29479FF1CDC8046E15036E2CB8@039-SN1MPN1-002.039d.mgd.msft.net>
On Mon, 2013-10-14 at 08:01 -0500, Yoder Stuart-B08248 wrote:
>
> > -----Original Message-----
> > From: Kim Phillips [mailto:kim.phillips@linaro.org]
> > Sent: Friday, October 11, 2013 6:17 PM
> > To: Wood Scott-B07421
> > Cc: Bhushan Bharat-R65777; Wood Scott-B07421; Yoder Stuart-B08248;
> > christoffer.dall@linaro.org; alex.williamson@redhat.com; linux-
> > kernel@vger.kernel.org; a.motakis@virtualopensystems.com; agraf@suse.de;
> > Sethi Varun-B16395; peter.maydell@linaro.org; santosh.shukla@linaro.org;
> > kvm@vger.kernel.org; gregkh@linuxfoundation.org
> > Subject: Re: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit binding
> > via sysfs only
> >
> > On Fri, 11 Oct 2013 15:43:40 -0500
> > Scott Wood <scottwood@freescale.com> wrote:
> >
> > > On Fri, 2013-10-11 at 01:27 -0500, Kim Phillips wrote:
> > > > Force the vfio-pci driver to only be bound explicitly via sysfs to
> > avoid
> > > > conflics with other drivers in the event of a hotplug.
> > > >
> > > > Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
> > > > ---
> > > > drivers/vfio/pci/vfio_pci.c | 3 +++
> > > > 1 file changed, 3 insertions(+)
> > > >
> > > > diff --git a/drivers/vfio/pci/vfio_pci.c
> > b/drivers/vfio/pci/vfio_pci.c
> > > > index 6ab71b9..bdd7833 100644
> > > > --- a/drivers/vfio/pci/vfio_pci.c
> > > > +++ b/drivers/vfio/pci/vfio_pci.c
> > > > @@ -901,6 +901,9 @@ static struct pci_driver vfio_pci_driver = {
> > > > .probe = vfio_pci_probe,
> > > > .remove = vfio_pci_remove,
> > > > .err_handler = &vfio_err_handlers,
> > > > + .driver = {
> > > > + .sysfs_bind_only = true,
> > > > + },
> > > > };
> > > >
> > > > static void __exit vfio_pci_cleanup(void)
> > >
> > > You also need to add a PCI_ANY_ID match in order to be able to get rid
> > > of the new_id usage.
> >
> > thanks - see below.
> >
> > Can someone with a PCI bus test this? Bharat?
> >
> > Kim
> >
> > From a8d6c12f2ec763c2ac7fd384a3397c370cc1b932 Mon Sep 17 00:00:00 2001
> > From: Kim Phillips <kim.phillips@linaro.org>
> > Date: Thu, 10 Oct 2013 22:16:34 -0500
> > Subject: [PATCH 3/4 v2] VFIO: pci: amend vfio-pci for explicit binding
> > via sysfs
> > only
> >
> > Force the vfio-pci driver to only be bound explicitly via sysfs to avoid
> > conflics with other drivers in the event of a hotplug. Also replace
> > the only dynamic ids assignment with a table with a single PCI_ANY_ID
> > entry since writing the sysfs bind file without having to specify ids
> > via the new_id file first should no longer be necessary.
> >
> > Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
> > ---
> > drivers/vfio/pci/vfio_pci.c | 12 +++++++++++-
> > 1 file changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> > index 6ab71b9..c5b434f 100644
> > --- a/drivers/vfio/pci/vfio_pci.c
> > +++ b/drivers/vfio/pci/vfio_pci.c
> > @@ -895,12 +895,22 @@ static struct pci_error_handlers vfio_err_handlers
> > = {
> > .error_detected = vfio_pci_aer_err_detected,
> > };
> >
> > +static DEFINE_PCI_DEVICE_TABLE(vfio_pci_id_table) = {
> > + { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
> > + { 0 }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(pci, vfio_pci_id_table);
> > +
> > static struct pci_driver vfio_pci_driver = {
> > .name = "vfio-pci",
> > - .id_table = NULL, /* only dynamic ids */
> > + .id_table = vfio_pci_id_table, /* no dynamic ids */
> > .probe = vfio_pci_probe,
> > .remove = vfio_pci_remove,
> > .err_handler = &vfio_err_handlers,
> > + .driver = {
> > + .sysfs_bind_only = true, /* bind only via sysfs */
> > + },
> > };
> >
> > static void __exit vfio_pci_cleanup(void)
>
> sysfs bind only seems orthogonal to PCI_ANY_ID...I would have split
> those into 2 different patches.
The mechanisms are orthogonal, but the change in use case is not.
sysfs_bind_only is required for PCI_ANY_ID to be safely used here. I
don't see a huge need to split them, but if they are split then
sysfs_bind_only must be first.
-Scott
next prev parent reply other threads:[~2013-10-14 17:14 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-01 18:38 RFC: (re-)binding the VFIO platform driver to a platform device Kim Phillips
2013-10-01 19:15 ` Scott Wood
2013-10-01 19:17 ` Scott Wood
2013-10-01 22:01 ` Kim Phillips
2013-10-01 21:59 ` Kim Phillips
2013-10-01 22:44 ` Scott Wood
2013-10-01 20:00 ` Greg Kroah-Hartman
2013-10-01 22:02 ` Kim Phillips
2013-10-02 1:53 ` Christoffer Dall
2013-10-02 2:35 ` Alex Williamson
2013-10-02 15:14 ` Christoffer Dall
2013-10-02 15:29 ` Alex Williamson
2013-10-02 18:25 ` Yoder Stuart-B08248
2013-10-02 18:32 ` Scott Wood
2013-10-02 18:43 ` Christoffer Dall
2013-10-02 20:04 ` Kim Phillips
2013-10-02 20:13 ` Christoffer Dall
2013-10-02 20:19 ` Scott Wood
2013-10-02 20:14 ` Scott Wood
2013-10-02 20:27 ` Christoffer Dall
2013-10-02 20:39 ` gregkh
2013-10-02 20:44 ` Christoffer Dall
2013-10-02 20:37 ` gregkh
2013-10-02 20:42 ` Christoffer Dall
2013-10-02 21:08 ` Scott Wood
2013-10-02 21:16 ` gregkh
2013-10-02 21:35 ` Scott Wood
2013-10-02 23:40 ` gregkh
2013-10-03 18:33 ` Scott Wood
2013-10-03 18:54 ` gregkh
2013-10-03 19:11 ` Scott Wood
2013-10-03 20:32 ` gregkh
2013-10-09 19:02 ` Yoder Stuart-B08248
2013-10-09 19:16 ` gregkh
2013-10-09 19:49 ` Scott Wood
2013-10-09 19:21 ` Scott Wood
2013-10-09 19:44 ` Yoder Stuart-B08248
2013-10-09 20:03 ` Scott Wood
2013-10-10 3:05 ` Kim Phillips
2013-10-10 8:01 ` Bhushan Bharat-R65777
2013-10-10 15:27 ` Scott Wood
2013-10-11 6:27 ` [PATCH 1/4] driver core: Add new device_driver flag to allow binding via sysfs only Kim Phillips
2013-10-11 6:27 ` [PATCH 2/4] driver core: platform: allow platform drivers to bind to any device Kim Phillips
2013-10-11 6:27 ` [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit binding via sysfs only Kim Phillips
2013-10-11 20:43 ` Scott Wood
2013-10-11 23:17 ` Kim Phillips
2013-10-14 13:01 ` Yoder Stuart-B08248
2013-10-14 17:13 ` Scott Wood [this message]
2013-10-24 11:32 ` Bhushan Bharat-R65777
2013-10-28 17:47 ` Alex Williamson
2013-10-28 18:00 ` Scott Wood
2013-10-28 18:09 ` Scott Wood
2013-10-29 3:38 ` Bhushan Bharat-R65777
2013-10-29 3:40 ` Scott Wood
2013-10-29 3:52 ` Bhushan Bharat-R65777
2013-10-29 4:29 ` Scott Wood
2013-10-29 4:31 ` Bhushan Bharat-R65777
2013-10-29 4:35 ` Scott Wood
2013-10-29 4:45 ` Bhushan Bharat-R65777
2013-10-29 4:54 ` Scott Wood
2013-10-29 6:39 ` Bhushan Bharat-R65777
2013-10-11 6:27 ` [PATCH] VFIO: platform: allow the driver to bind to any device explicitly via sysfs Kim Phillips
2013-10-10 7:45 ` RFC: (re-)binding the VFIO platform driver to a platform device Bhushan Bharat-R65777
2013-10-10 13:43 ` Yoder Stuart-B08248
2013-10-10 15:23 ` Scott Wood
2013-10-10 15:25 ` Bhushan Bharat-R65777
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381770828.7979.606.camel@snotra.buserror.net \
--to=scottwood@freescale.com \
--cc=B07421@freescale.com \
--cc=B08248@freescale.com \
--cc=B16395@freescale.com \
--cc=R65777@freescale.com \
--cc=a.motakis@virtualopensystems.com \
--cc=agraf@suse.de \
--cc=alex.williamson@redhat.com \
--cc=christoffer.dall@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=kim.phillips@linaro.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.maydell@linaro.org \
--cc=santosh.shukla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®