mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Ian.Campbell@citrix.com, xen-devel@lists.xenproject.org,
	linux-kernel@vger.kernel.org, JBeulich@suse.com,
	david.vrabel@citrix.com, boris.ostrovsky@oracle.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Mukesh Rathor <mukesh.rathor@oracle.com>
Subject: [PATCH 1/4] xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.
Date: Fri,  8 Nov 2013 12:38:03 -0500	[thread overview]
Message-ID: <1383932286-25080-2-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1383932286-25080-1-git-send-email-konrad.wilk@oracle.com>

The PCI MMCONFIG area is usually reserved via the E820 so the Xen hypervisor
is aware of these regions. But they can also be enumerated in the ACPI
DSDT which means the hypervisor won't know of them until the initial
domain informs it of via PHYSDEVOP_pci_mmcfg_reserved.

This is what this patch does for all of the MCFG regions that the
initial domain is aware of (E820 enumerated and ACPI).

Reported-by:  Santosh Jodh <Santosh.Jodh@citrix.com>
CC: Jan Beulich <JBeulich@suse.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: David Vrabel <david.vrabel@citrix.com>
CC: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Redid it a bit]
[v2: Dropped the P2M 1-1 setting]
[v3: Check for Xen in-case we are running under baremetal]
[v4: Wrap with CONFIG_PCI_MMCONFIG]
---
 drivers/xen/pci.c               | 47 +++++++++++++++++++++++++++++++++++++++++
 include/xen/interface/physdev.h | 11 ++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 18fff88..d15f6e8 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -26,6 +26,7 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 #include "../pci/pci.h"
+#include <asm/pci_x86.h>
 
 static bool __read_mostly pci_seg_supported = true;
 
@@ -192,3 +193,49 @@ static int __init register_xen_pci_notifier(void)
 }
 
 arch_initcall(register_xen_pci_notifier);
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init xen_mcfg_late(void)
+{
+	struct pci_mmcfg_region *cfg;
+	int rc;
+
+	if (!xen_initial_domain())
+		return 0;
+
+	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+		return 0;
+
+	if (list_empty(&pci_mmcfg_list))
+		return 0;
+
+	/* Check whether they are in the right area. */
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		struct physdev_pci_mmcfg_reserved r;
+
+		r.address = cfg->address;
+		r.segment = cfg->segment;
+		r.start_bus = cfg->start_bus;
+		r.end_bus = cfg->end_bus;
+		r.flags = XEN_PCI_MMCFG_RESERVED;
+
+		rc = HYPERVISOR_physdev_op(PHYSDEVOP_pci_mmcfg_reserved, &r);
+		switch (rc) {
+		case 0:
+		case -ENOSYS:
+			continue;
+
+		default:
+			pr_warn("Failed to report MMCONFIG reservation"
+				" state for %s to hypervisor"
+				" (%d)\n",
+				cfg->name, rc);
+		}
+	}
+	return 0;
+}
+/*
+ * Needs to be done after acpi_init which are subsys_initcall.
+ */
+subsys_initcall_sync(xen_mcfg_late);
+#endif
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
index 7000bb1..42721d1 100644
--- a/include/xen/interface/physdev.h
+++ b/include/xen/interface/physdev.h
@@ -231,6 +231,17 @@ struct physdev_get_free_pirq {
 #define XEN_PCI_DEV_VIRTFN             0x2
 #define XEN_PCI_DEV_PXM                0x4
 
+#define XEN_PCI_MMCFG_RESERVED         0x1
+
+#define PHYSDEVOP_pci_mmcfg_reserved    24
+struct physdev_pci_mmcfg_reserved {
+    uint64_t address;
+    uint16_t segment;
+    uint8_t start_bus;
+    uint8_t end_bus;
+    uint32_t flags;
+};
+
 #define PHYSDEVOP_pci_device_add        25
 struct physdev_pci_device_add {
     /* IN */
-- 
1.8.3.1


  reply	other threads:[~2013-11-08 17:38 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-08 17:38 [PATCH] Fixes to Linux v3.13 - bugs.xenproject.org ones. (v1) Konrad Rzeszutek Wilk
2013-11-08 17:38 ` Konrad Rzeszutek Wilk [this message]
2013-11-21 10:37   ` [PATCH 1/4] xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas David Vrabel
2013-11-08 17:38 ` [PATCH 2/4] xen/manage: Poweroff forcefully if user-space is not yet up Konrad Rzeszutek Wilk
2013-11-20 21:11   ` Boris Ostrovsky
2013-11-21 11:33   ` David Vrabel
2013-11-26 16:47     ` Konrad Rzeszutek Wilk
2014-04-01 15:43     ` Konrad Rzeszutek Wilk
2013-11-08 17:38 ` [PATCH 3/4] xen/manage: Guard against user-space initiated poweroff and XenBus Konrad Rzeszutek Wilk
2013-11-20 21:40   ` Boris Ostrovsky
2013-11-21 11:09   ` David Vrabel
2013-11-26 16:45     ` Konrad Rzeszutek Wilk
2013-12-02 11:27       ` David Vrabel
2014-03-31 19:09         ` Konrad Rzeszutek Wilk
2014-04-01 13:18   ` David Vrabel
2014-04-01 14:03     ` Konrad Rzeszutek Wilk
2013-11-08 17:38 ` [PATCH 4/4] xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart Konrad Rzeszutek Wilk
2013-11-21 17:52   ` [Xen-devel] " David Vrabel
2013-11-22  9:30     ` Ian Campbell
2013-11-26 16:50     ` Konrad Rzeszutek Wilk
2013-12-02 11:41       ` David Vrabel
2014-03-31 20:33         ` Konrad Rzeszutek Wilk
2014-04-01 12:53           ` David Vrabel
2014-01-26  1:13   ` Zhang, Yang Z
2014-01-26  3:44     ` Konrad Rzeszutek Wilk
2014-04-03 11:59 ` [PATCH] Fixes to Linux v3.13 - bugs.xenproject.org ones. (v1) David Vrabel
2014-04-03 18:07   ` Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1383932286-25080-2-git-send-email-konrad.wilk@oracle.com \
    --to=konrad.wilk@oracle.com \
    --cc=Ian.Campbell@citrix.com \
    --cc=JBeulich@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=david.vrabel@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mukesh.rathor@oracle.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®