From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: balbi@ti.com
Cc: gregkh@linuxfoundation.org, rob.herring@calxeda.com,
pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
ijc+devicetree@hellion.org.uk, davidb@codeaurora.org,
linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
Manu Gautam <mgautam@codeaurora.org>,
devicetree@vger.kernel.org
Subject: [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control
Date: Tue, 12 Nov 2013 16:51:47 +0200 [thread overview]
Message-ID: <1384267910-32066-13-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1384267910-32066-1-git-send-email-iivanov@mm-sol.com>
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Allow support to use 2nd HSPHY with USB2 Core.
Some platforms may have configuration to allow USB controller
work with any of the two HSPHYs present. By default driver
configures USB core to use primary HSPHY. Add support to allow
user select 2nd HSPHY using DT parameter.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: devicetree@vger.kernel.org
---
.../devicetree/bindings/usb/msm-hsusb.txt | 6 +++++
drivers/usb/phy/phy-msm-usb.c | 24 ++++++++++++++++++--
include/linux/usb/msm_hsusb.h | 1 +
include/linux/usb/msm_hsusb_hw.h | 1 +
4 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 3f21204..d105ba9 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -72,6 +72,12 @@ Optional properties:
- qcom,phy-init-sequence: PHY configuration sequence. val, reg pairs
terminate with -1
+- qcom,phy-num: Select number of pyco-phy to use, can be one of
+ 0 - PHY one, default
+ 1 - Second PHY
+ Some platforms may have configuration to allow USB
+ controller work with any of the two HSPHYs present.
+
Example HSUSB OTG controller device node:
usb@f9a55000 {
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 53fc645..01b571ff 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -340,6 +340,9 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
if (!retries)
return -ETIMEDOUT;
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
dev_info(motg->phy.dev, "phy_reset: success\n");
return 0;
}
@@ -394,6 +397,9 @@ static int msm_otg_reset(struct usb_phy *phy)
ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
}
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
return 0;
}
@@ -406,6 +412,7 @@ static int msm_otg_suspend(struct msm_otg *motg)
struct usb_phy *phy = &motg->phy;
struct usb_bus *bus = phy->otg->host;
struct msm_otg_platform_data *pdata = motg->pdata;
+ void __iomem *addr;
int cnt = 0;
if (atomic_read(&motg->in_lpm))
@@ -465,9 +472,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
*/
writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL)
- writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
+ writel(readl(addr) | PHY_RETEN, addr);
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
@@ -497,6 +508,7 @@ static int msm_otg_resume(struct msm_otg *motg)
{
struct usb_phy *phy = &motg->phy;
struct usb_bus *bus = phy->otg->host;
+ void __iomem *addr;
int cnt = 0;
unsigned temp;
@@ -510,9 +522,14 @@ static int msm_otg_resume(struct msm_otg *motg)
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
msm_hsusb_ldo_set_mode(motg, 1);
msm_hsusb_config_vddcx(motg, 1);
- writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
+ writel(readl(addr) & ~PHY_RETEN, addr);
}
temp = readl(USB_USBCMD);
@@ -1395,6 +1412,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
if (!of_property_read_u32(node, "qcom,otg-control", &val))
pdata->otg_control = val;
+ if (!of_property_read_u32(node, "qcom,phy-num", &val))
+ motg->phy_number = val;
+
if (!of_get_property(node, "qcom,phy-init-sequence", &len) || !len)
return 0;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 9bf8943..da3a974 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -156,6 +156,7 @@ struct msm_otg {
atomic_t in_lpm;
int async_int;
unsigned cur_power;
+ int phy_number;
struct delayed_work chg_work;
enum usb_chg_state chg_state;
enum usb_chg_type chg_type;
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index 6e97a2d..e6d7035 100644
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -25,6 +25,7 @@
#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240)
+#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278)
#define USBCMD_RESET 2
#define USB_USBINTR (MSM_USB_BASE + 0x0148)
--
1.7.9.5
next prev parent reply other threads:[~2013-11-12 14:56 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-12 14:51 [PATCH v4 00/15] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 01/15] usb: phy: msm: Move mach dependent code to platform data Ivan T. Ivanov
2013-11-12 18:27 ` Christopher Covington
2013-11-12 19:11 ` Ivan T. Ivanov
2013-12-11 10:11 ` Ivan T. Ivanov
2013-12-27 18:10 ` Felipe Balbi
2013-12-27 18:23 ` Stephen Boyd
2013-12-27 18:44 ` Felipe Balbi
2013-11-12 14:51 ` [PATCH v4 02/15] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 03/15] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 04/15] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 05/15] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 06/15] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2013-12-19 23:03 ` David Brown
2013-11-12 14:51 ` [PATCH v4 07/15] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 08/15] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 09/15] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 10/15] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2013-11-15 16:38 ` Mark Rutland
2013-11-18 12:54 ` Ivan T. Ivanov
2013-12-05 10:41 ` Mark Rutland
2013-12-11 9:45 ` Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 11/15] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2013-11-12 14:51 ` Ivan T. Ivanov [this message]
2013-11-15 16:42 ` [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control Mark Rutland
2013-11-18 12:57 ` Ivan T. Ivanov
2013-12-05 10:42 ` Mark Rutland
2013-12-11 8:23 ` Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 13/15] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 14/15] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 15/15] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2013-11-26 16:38 ` [PATCH v4 00/15] usb: phy: msm: Fixes, cleanups and DT support Felipe Balbi
2013-12-19 23:03 ` David Brown
2013-12-19 23:26 ` Felipe Balbi
2013-12-20 19:59 ` David Brown
2013-12-27 0:26 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384267910-32066-13-git-send-email-iivanov@mm-sol.com \
--to=iivanov@mm-sol.com \
--cc=balbi@ti.com \
--cc=davidb@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®