mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: balbi@ti.com
Cc: gregkh@linuxfoundation.org, rob.herring@calxeda.com,
	pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
	ijc+devicetree@hellion.org.uk, davidb@codeaurora.org,
	linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Daniel Walker <dwalker@fifo99.com>
Subject: [PATCH v4 01/15] usb: phy: msm: Move mach dependent code to platform data
Date: Tue, 12 Nov 2013 16:51:36 +0200	[thread overview]
Message-ID: <1384267910-32066-2-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1384267910-32066-1-git-send-email-iivanov@mm-sol.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

This patch fix compilation error when driver is compiled
in multi-platform builds.

drivers/built-in.o: In function `msm_otg_link_clk_reset':
./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'

Use platform data supplied reset handlers and adjust error
messages reported when reset sequence fail.

This is an intermediate step before adding support for reset
framework and newer targets.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-msm/board-msm7x30.c |   35 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-msm/board-qsd8x50.c |   35 +++++++++++++++++++++++++++++++++++
 drivers/usb/phy/phy-msm-usb.c     |   35 +++++++++++++++--------------------
 include/linux/usb/msm_hsusb.h     |    3 +++
 4 files changed, 88 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index f9af5a4..46de789 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -30,6 +30,7 @@
 #include <asm/memory.h>
 #include <asm/setup.h>
 
+#include <mach/clk.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
 
@@ -60,10 +61,44 @@ static int hsusb_phy_init_seq[] = {
 	-1
 };
 
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+		if (ret)
+			pr_err("usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+		if (ret)
+			pr_err("usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+	int ret;
+
+	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		pr_err("usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		pr_err("usb phy clk deassert failed\n");
+	return ret;
+}
+
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
 	.mode                   = USB_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
+	.link_clk_reset		= hsusb_link_clk_reset,
+	.phy_clk_reset		= hsusb_phy_clk_reset,
 };
 
 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 5f933bc..9169ec3 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -31,6 +31,7 @@
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
+#include <mach/clk.h>
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
@@ -81,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
 	-1
 };
 
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+		if (ret)
+			pr_err("usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+		if (ret)
+			pr_err("usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+	int ret;
+
+	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		pr_err("usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		pr_err("usb phy clk deassert failed\n");
+	return ret;
+}
+
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
 	.mode                   = USB_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
+	.link_clk_reset		= hsusb_link_clk_reset,
+	.phy_clk_reset		= hsusb_phy_clk_reset,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index e9d4cd9..9a47d44 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -40,8 +40,6 @@
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
-#include <mach/clk.h>
-
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"
 
@@ -308,33 +306,30 @@ static void ulpi_init(struct msm_otg *motg)
 
 static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 {
-	int ret;
+	int ret = 0;
+
+	if (!motg->pdata->link_clk_reset)
+		return ret;
+
+	ret = motg->pdata->link_clk_reset(motg->clk, assert);
+	if (ret)
+		dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+			assert ? "assert" : "deassert");
 
-	if (assert) {
-		ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
-		if (ret)
-			dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
-	} else {
-		ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
-		if (ret)
-			dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
-	}
 	return ret;
 }
 
 static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
-	int ret;
+	int ret = 0;
 
-	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
-	if (ret) {
-		dev_err(motg->phy.dev, "usb phy clk assert failed\n");
+	if (!motg->pdata->phy_clk_reset)
 		return ret;
-	}
-	usleep_range(10000, 12000);
-	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+
+	ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
 	if (ret)
-		dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
+		dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
 	return ret;
 }
 
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 22a396c..3275483 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -20,6 +20,7 @@
 
 #include <linux/types.h>
 #include <linux/usb/otg.h>
+#include <linux/clk.h>
 
 /**
  * Supported USB modes
@@ -135,6 +136,8 @@ struct msm_otg_platform_data {
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
 	char *pclk_src_name;
+	int (*link_clk_reset)(struct clk *link_clk, bool assert);
+	int (*phy_clk_reset)(struct clk *phy_clk);
 };
 
 /**
-- 
1.7.9.5


  reply	other threads:[~2013-11-12 14:54 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-12 14:51 [PATCH v4 00/15] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2013-11-12 14:51 ` Ivan T. Ivanov [this message]
2013-11-12 18:27   ` [PATCH v4 01/15] usb: phy: msm: Move mach dependent code to platform data Christopher Covington
2013-11-12 19:11     ` Ivan T. Ivanov
2013-12-11 10:11   ` Ivan T. Ivanov
2013-12-27 18:10   ` Felipe Balbi
2013-12-27 18:23     ` Stephen Boyd
2013-12-27 18:44       ` Felipe Balbi
2013-11-12 14:51 ` [PATCH v4 02/15] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 03/15] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 04/15] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 05/15] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 06/15] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2013-12-19 23:03   ` David Brown
2013-11-12 14:51 ` [PATCH v4 07/15] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 08/15] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 09/15] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 10/15] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2013-11-15 16:38   ` Mark Rutland
2013-11-18 12:54     ` Ivan T. Ivanov
2013-12-05 10:41       ` Mark Rutland
2013-12-11  9:45         ` Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 11/15] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2013-11-15 16:42   ` Mark Rutland
2013-11-18 12:57     ` Ivan T. Ivanov
2013-12-05 10:42       ` Mark Rutland
2013-12-11  8:23         ` Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 13/15] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 14/15] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
2013-11-12 14:51 ` [PATCH v4 15/15] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2013-11-26 16:38 ` [PATCH v4 00/15] usb: phy: msm: Fixes, cleanups and DT support Felipe Balbi
2013-12-19 23:03   ` David Brown
2013-12-19 23:26     ` Felipe Balbi
2013-12-20 19:59       ` David Brown
2013-12-27  0:26         ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384267910-32066-2-git-send-email-iivanov@mm-sol.com \
    --to=iivanov@mm-sol.com \
    --cc=balbi@ti.com \
    --cc=davidb@codeaurora.org \
    --cc=dwalker@fifo99.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®