* Re: linux-next: vexpress boot test failed on vexpress-a9
[not found] <CA+G9fYs8faqriTXahi_u6btK5QcrSzQA+wwpP25s2bL4k7ooWg@mail.gmail.com>
@ 2013-11-22 14:32 ` Pawel Moll
0 siblings, 0 replies; only message in thread
From: Pawel Moll @ 2013-11-22 14:32 UTC (permalink / raw)
To: Naresh Kamboju
Cc: linux-kernel, Lists linaro-kernel, Andrey Konovalov,
Fathi Boudra, ryan.harkin, Kevin Hilman, Milosz Wasilewski
On Fri, 2013-11-22 at 09:33 +0000, Naresh Kamboju wrote:
> Boot failed log:
> --------------------
> mmci-pl18x 10005000.mmci: dummy supplies not allowed
This message is irrelevant.
> mmci-pl18x 10005000.mmci: Failed getting OCR mask: 0
> mmci-pl18x 10005000.mmci: mmc0: PL180 manf 41 rev0 at 0x10005000 irq 41,42 (pio)
> mmci-pl18x 10005000.mmci: no support for card's volts
>
> mmc0: error -22 whilst initialising SD card
> mmci-pl18x 10005000.mmci: no support for card's volts
> mmc0: error -22 whilst initialising SD card
>
> This issue was reported by QA team and fixed by Fathi [1] couple of
> months back. Now this patch is applied on mainline [2]. But boot test
> still failed [4].
Just tried, seems to work for me:
/ # uname -a
Linux (none) 3.12.0-next-20131122 #3 SMP Fri Nov 22 09:48:12 GMT 2013 armv7l GNU/Linux
/ # dmesg | grep mmc
mmci-pl18x 10005000.mmci: dummy supplies not allowed
mmci-pl18x 10005000.mmci: mmc0: PL180 manf 41 rev0 at 0x10005000 irq 41,42 (pio)
mmc0: new SD card at address 88f7
mmcblk0: mmc0:88f7 SD02G 1.84 GiB
mmcblk0: p1 p2
It's next-20131122 compiled with vexpress_defconfig and stock tree.
Paweł
^ permalink raw reply [flat|nested] only message in thread