From: Jan Kara <jack@suse.cz>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: pmladek@suse.cz, Steven Rostedt <rostedt@goodmis.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
LKML <linux-kernel@vger.kernel.org>, Jan Kara <jack@suse.cz>
Subject: [PATCH 7/9] printk: Enable interrupts before calling console_trylock_for_printk()
Date: Mon, 23 Dec 2013 21:39:28 +0100 [thread overview]
Message-ID: <1387831171-5264-8-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1387831171-5264-1-git-send-email-jack@suse.cz>
We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()). However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().
We can loose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock()
especially since later in the patch series we will want to spin on
console_sem in console_trylock_for_printk().
Signed-off-by: Jan Kara <jack@suse.cz>
---
kernel/printk/printk.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 72ec3637115f..ab0d24a9ab7c 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1320,10 +1320,9 @@ static int have_callable_console(void)
/*
* Can we actually use the console at this time on this cpu?
*
- * Console drivers may assume that per-cpu resources have
- * been allocated. So unless they're explicitly marked as
- * being able to cope (CON_ANYTIME) don't call them until
- * this CPU is officially up.
+ * Console drivers may assume that per-cpu resources have been allocated. So
+ * unless they're explicitly marked as being able to cope (CON_ANYTIME) don't
+ * call them until this CPU is officially up.
*/
static inline int can_use_console(unsigned int cpu)
{
@@ -1336,8 +1335,10 @@ static inline int can_use_console(unsigned int cpu)
* console_lock held, and 'console_locked' set) if it
* is successful, false otherwise.
*/
-static int console_trylock_for_printk(unsigned int cpu)
+static int console_trylock_for_printk(void)
{
+ unsigned int cpu = smp_processor_id();
+
if (!console_trylock())
return 0;
/*
@@ -1507,7 +1508,8 @@ asmlinkage int vprintk_emit(int facility, int level,
*/
if (!oops_in_progress && !lockdep_recursing(current)) {
recursion_bug = 1;
- goto out_restore_irqs;
+ local_irq_restore(flags);
+ return 0;
}
zap_locks();
}
@@ -1600,17 +1602,22 @@ asmlinkage int vprintk_emit(int facility, int level,
logbuf_cpu = UINT_MAX;
raw_spin_unlock(&logbuf_lock);
+ lockdep_on();
+ local_irq_restore(flags);
+
+ /*
+ * Disable preemption to avoid being preempted while holding
+ * console_sem which would prevent anyone from printing to console
+ */
+ preempt_disable();
/*
* Try to acquire and then immediately release the console semaphore.
* The release will print out buffers and wake up /dev/kmsg and syslog()
* users.
*/
- if (console_trylock_for_printk(this_cpu))
+ if (console_trylock_for_printk())
console_unlock();
-
- lockdep_on();
-out_restore_irqs:
- local_irq_restore(flags);
+ preempt_enable();
return printed_len;
}
--
1.8.1.4
next prev parent reply other threads:[~2013-12-23 20:41 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-23 20:39 [PATCH 0/9] printk: Cleanups and softlockup avoidance Jan Kara
2013-12-23 20:39 ` [PATCH 1/9] block: Stop abusing csd.list for fifo_time Jan Kara
2014-02-01 16:48 ` Frederic Weisbecker
2014-02-03 14:48 ` Jan Kara
2014-02-03 17:02 ` Frederic Weisbecker
2013-12-23 20:39 ` [PATCH 2/9] block: Stop abusing rq->csd.list in blk-softirq Jan Kara
2014-01-30 12:39 ` Frederic Weisbecker
2014-01-30 15:45 ` Jan Kara
2014-01-30 17:01 ` Frederic Weisbecker
2014-01-30 22:12 ` Jan Kara
2014-01-31 15:08 ` Frederic Weisbecker
2013-12-23 20:39 ` [PATCH 3/9] kernel: use lockless list for smp_call_function_single() Jan Kara
2014-01-07 16:21 ` Frederic Weisbecker
2013-12-23 20:39 ` [PATCH 4/9] smp: Teach __smp_call_function_single() to check for offline cpus Jan Kara
2014-01-03 0:47 ` Steven Rostedt
2013-12-23 20:39 ` [PATCH 5/9] smp: Provide __smp_call_function_any() Jan Kara
2014-01-03 0:51 ` Steven Rostedt
2013-12-23 20:39 ` [PATCH 6/9] printk: Release lockbuf_lock before calling console_trylock_for_printk() Jan Kara
2014-01-03 1:53 ` Steven Rostedt
2014-01-03 7:49 ` Jan Kara
2013-12-23 20:39 ` Jan Kara [this message]
2013-12-23 20:39 ` [PATCH 8/9] printk: Remove separate printk_sched buffers and use printk buf instead Jan Kara
2013-12-23 20:39 ` [PATCH 9/9] printk: Hand over printing to console if printing too long Jan Kara
2014-01-05 7:57 ` Andrew Morton
2014-01-06 9:46 ` Jan Kara
2014-01-13 7:28 ` Jan Kara
2014-01-15 22:23 ` Andrew Morton
2014-01-16 15:52 ` Jan Kara
2013-12-23 20:39 ` [PATCH 10/10] printk: debug: Slow down printing to 9600 bauds Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387831171-5264-8-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pmladek@suse.cz \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®