[PATCH 0/3] cpupower tools: trivial cleanup

[PATCH 0/3] cpupower tools: trivial cleanup

[Ramkumar Ramachandra]

Hi,

I just had a chance to look at cpupower; here's a small contribution.

Thanks.

Cc: Thomas Renninger <trenn@suse.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>

Ramkumar Ramachandra (3):
  cpupower tools: adjust README to reflect rename
  cpupower tools: update README
  cpupower tools: update uninstall target

 tools/power/cpupower/Makefile |  8 ++++++--
 tools/power/cpupower/README   | 24 +++++++++++-------------
 tools/power/cpupower/ToDo     |  1 -
 3 files changed, 17 insertions(+), 16 deletions(-)

-- 
1.8.5.2.227.g53f3478

[PATCH 1/3] cpupower tools: adjust README to reflect rename

[Ramkumar Ramachandra]

Rename cpufrequtils -> cpupower, and libcpufreq -> libcpupower.

Cc: Thomas Renninger <trenn@suse.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
---
 tools/power/cpupower/README | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README
index fd9d4c0..96ff1ff 100644
--- a/tools/power/cpupower/README
+++ b/tools/power/cpupower/README
@@ -1,4 +1,4 @@
-The cpufrequtils package (homepage: 
+The cpupower package (homepage:
 http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html ) 
 consists of the following elements:
 
@@ -11,10 +11,10 @@ providing cpuid.h is needed.
 For both it's not explicitly checked for (yet).
 
 
-libcpufreq
+libcpupower
 ----------
 
-"libcpufreq" is a library which offers a unified access method for userspace
+"libcpupower" is a library which offers a unified access method for userspace
 tools and programs to the cpufreq core and drivers in the Linux kernel. This
 allows for code reduction in userspace tools, a clean implementation of
 the interaction to the cpufreq core, and support for both the sysfs and proc
@@ -28,7 +28,7 @@ make
 su
 make install
 
-should suffice on most systems. It builds default libcpufreq,
+should suffice on most systems. It builds default libcpupower,
 cpufreq-set and cpufreq-info files and installs them in /usr/lib and
 /usr/bin, respectively. If you want to set up the paths differently and/or
 want to configure the package to your specific needs, you need to open
@@ -39,11 +39,11 @@ CONFIGURATION.
 THANKS
 ------
 Many thanks to Mattia Dongili who wrote the autotoolization and
-libtoolization, the manpages and the italian language file for cpufrequtils;
+libtoolization, the manpages and the italian language file for cpupower;
 to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his
 powernow-k8-decode and intel_gsic tools as well as the french language file;
 and to various others commenting on the previous (pre-)releases of 
-cpufrequtils.
+cpupower.
 
 
         Dominik Brodowski
-- 
1.8.5.2.227.g53f3478

[PATCH 2/3] cpupower tools: update README

[Ramkumar Ramachandra]

Remove dead link to homepage, and update the targets built.

Cc: Thomas Renninger <trenn@suse.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
---
 tools/power/cpupower/README | 16 +++++++---------
 tools/power/cpupower/ToDo   |  1 -
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README
index 96ff1ff..1c68f47 100644
--- a/tools/power/cpupower/README
+++ b/tools/power/cpupower/README
@@ -1,6 +1,4 @@
-The cpupower package (homepage:
-http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html ) 
-consists of the following elements:
+The cpupower package consists of the following elements:
 
 requirements
 ------------
@@ -28,12 +26,12 @@ make
 su
 make install
 
-should suffice on most systems. It builds default libcpupower,
-cpufreq-set and cpufreq-info files and installs them in /usr/lib and
-/usr/bin, respectively. If you want to set up the paths differently and/or
-want to configure the package to your specific needs, you need to open
-"Makefile" with an editor of your choice and edit the block marked
-CONFIGURATION.
+should suffice on most systems. It builds libcpupower to put in
+/usr/lib; cpupower, cpufreq-bench_plot.sh to put in /usr/bin; and
+cpufreq-bench to put in /usr/sbin. If you want to set up the paths
+differently and/or want to configure the package to your specific
+needs, you need to open "Makefile" with an editor of your choice and
+edit the block marked CONFIGURATION.
 
 
 THANKS
diff --git a/tools/power/cpupower/ToDo b/tools/power/cpupower/ToDo
index 874b78b..6e8b89f 100644
--- a/tools/power/cpupower/ToDo
+++ b/tools/power/cpupower/ToDo
@@ -3,7 +3,6 @@ ToDos sorted by priority:
 - Use bitmask functions to parse CPU topology more robust
   (current implementation has issues on AMD)
 - Try to read out boost states and frequencies on Intel
-- Adjust README
 - Somewhere saw the ability to read power consumption of
   RAM from HW on Intel SandyBridge -> another monitor?
 - Add another c1e debug idle monitor
-- 
1.8.5.2.227.g53f3478

[PATCH 3/3] cpupower tools: update uninstall target

[Ramkumar Ramachandra]

Cc: Thomas Renninger <trenn@suse.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
---
 tools/power/cpupower/Makefile | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index cbfec92..dca6b43 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -295,8 +295,12 @@ uninstall:
 	- rm -f $(DESTDIR)${libdir}/libcpupower.*
 	- rm -f $(DESTDIR)${includedir}/cpufreq.h
 	- rm -f $(DESTDIR)${bindir}/utils/cpupower
-	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-set.1
-	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-info.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower-set.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower-info.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpupower-monitor.1
 	- for HLANG in $(LANGUAGES); do \
 		rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
 	  done;
-- 
1.8.5.2.227.g53f3478