From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Mikulas Patocka <mpatocka@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>,
"Alasdair G. Kergon" <agk@redhat.com>,
Mike Snitzer <msnitzer@redhat.com>,
dm-devel@redhat.com, "David S. Miller" <davem@davemloft.net>,
linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, Neil Brown <neilb@suse.de>,
linux-raid@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH] block devices: validate block device capacity
Date: Thu, 30 Jan 2014 21:45:27 -0800 [thread overview]
Message-ID: <1391147127.2181.159.camel@dabdike.int.hansenpartnership.com> (raw)
In-Reply-To: <alpine.LRH.2.02.1401302116180.9767@file01.intranet.prod.int.rdu2.redhat.com>
On Thu, 2014-01-30 at 21:43 -0500, Mikulas Patocka wrote:
>
> On Thu, 30 Jan 2014, James Bottomley wrote:
>
> > > A device may be accessed direcly (by opening /dev/sdX) and it creates a
> > > mapping too - thus, the size of a mapping limits the size of a block
> > > device.
> >
> > Right, that's what I suspected below. We can't damage large block
> > support on filesystems just because of this corner case.
>
> Devices larger than 16TiB never worked on 32-bit kernel, so this patch
> isn't damaging anything.
expectations: 32 bit with CONFIG_LBDAF is supposed to be able to do
almost everything 64 bits can
> Note that if you attach a 16TiB block device, don't open it and mount it,
> it still won't work, because the buffer cache uses the page cache (see the
> function __find_get_block_slow and the variable "pgoff_t index" - that
> variable would overflow if the filesystem accessed a buffer beyond 16TiB).
That depends on the layout of the fs metadata.
> > > The main problem is that pgoff_t has 4 bytes - chaning it to 8 bytes may
> > > fix it - but there may be some hidden places where pgoff is converted to
> > > unsigned long - who knows, if they exist or not?
> >
> > I don't think we want to do that ... it will make struct page fatter and
> > have knock on impacts in the radix tree code. To fix this, we need to
> > make the corner case (i.e. opening large block devices without a
> > filesystem) bear the pain. It sort of looks like we want to do a linear
> > array of mappings of 64TB for the device so the page cache calculations
> > don't overflow.
>
> The code that reads and writes data to block devices and files is shared -
> the functions in mm/filemap.c work for both files and block devices.
Yes.
> So, if you want 64-bit page offsets, you need to increase pgoff_t size,
> and that will increase the limit for both files and block devices.
No. The point is the page cache mapping of the device uses a
manufactured inode saved in the backing device. It looks fixable in the
buffer code before the page cache gets involved.
> You shouldn't have separate functions for managing pages on files and
> separate functions for managing pages on block devices - that would
> increase code size and cause maintenance problems.
It wouldn't it would add structure to the buffer cache for large
devices.
> > > Though, we need to know if the people who designed memory management agree
> > > with changing pgoff_t to 64 bits.
> >
> > I don't think we can change the size of pgoff_t ... because it won't
> > just be that, it will be other problems like the radix tree.
>
> If we can't change it, then we must stay with the current 16TiB limit.
> There's no other way.
>
> > However, you also have to bear in mind that truncating large block
> > device support to 64TB on 32 bits is a technical ABI break. Hopefully
> > it is only technical because I don't know of any current consumer block
> > device that is 64TB yet, but anyone who'd created a filesystem >64TB
> > would find it no-longer mounted on 32 bits.
> > James
>
> It is not ABI break, because block devices larger than 16TiB never worked
> on 32-bit architectures. So it's better to refuse them outright, than to
> cause subtle lockups or data corruption.
An ABI is a contract between the userspace and the kernel. Saying we
can remove a clause in the contract because no-one ever exercised it and
not call it changing the contract is sophistry. The correct thing to do
would be to call it a bug and fix it.
In a couple of short years we'll be over 16TB for hard drives. I don't
really want to be the one explaining to the personal storage people that
the only way to install a 16+TB drive in their arm (or quark) based
Linux systems is a processor upgrade.
I suppose there are a couple of possibilities: pgoff_t + radix tree
expansion or double radix tree in the buffer code. This should probably
be taken to fsdevel where they might have better ideas.
James
next prev parent reply other threads:[~2014-01-31 5:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-30 20:40 Mikulas Patocka
2014-01-30 22:49 ` James Bottomley
2014-01-30 23:10 ` Mikulas Patocka
2014-01-30 23:37 ` James Bottomley
2014-01-31 0:20 ` Mikulas Patocka
2014-01-31 1:43 ` James Bottomley
2014-01-31 2:43 ` Mikulas Patocka
2014-01-31 5:45 ` James Bottomley [this message]
2014-01-31 8:20 ` Mikulas Patocka
2014-02-03 8:15 ` Christoph Hellwig
2014-02-03 20:22 ` Mikulas Patocka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391147127.2181.159.camel@dabdike.int.hansenpartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=dm-devel@redhat.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-raid@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mpatocka@redhat.com \
--cc=msnitzer@redhat.com \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®