[PATCH] w1: Remove excess dependencies on W1 for masters and slaves

[PATCH] w1: Remove excess dependencies on W1 for masters and slaves

[Alexander Shiyan]

Configuration for masters and slaves is included only if W1 symbol
enabled, so no reason to check it once more.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/w1/masters/Kconfig | 3 +--
 drivers/w1/slaves/Kconfig  | 5 -----
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index efc7f07..6ffe120 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,13 +36,12 @@ config W1_MASTER_DS2482
 
 config W1_MASTER_MXC
 	tristate "Freescale MXC 1-wire busmaster"
-	depends on W1 && ARCH_MXC
+	depends on ARCH_MXC
 	help
 	  Say Y here to enable MXC 1-wire host
 
 config W1_MASTER_DS1WM
 	tristate "Maxim DS1WM 1-wire busmaster"
-	depends on W1
 	help
 	  Say Y here to enable the DS1WM 1-wire driver, such as that
 	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 5e6a3c9..1cdce80 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -72,7 +72,6 @@ config W1_SLAVE_DS2433_CRC
 
 config W1_SLAVE_DS2760
 	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
-	depends on W1
 	help
 	  If you enable this you will have the DS2760 battery monitor
 	  chip support.
@@ -85,7 +84,6 @@ config W1_SLAVE_DS2760
 
 config W1_SLAVE_DS2780
 	tristate "Dallas 2780 battery monitor chip"
-	depends on W1
 	help
 	  If you enable this you will have the DS2780 battery monitor
 	  chip support.
@@ -98,7 +96,6 @@ config W1_SLAVE_DS2780
 
 config W1_SLAVE_DS2781
 	tristate "Dallas 2781 battery monitor chip"
-	depends on W1
 	help
 	  If you enable this you will have the DS2781 battery monitor
 	  chip support.
@@ -111,7 +108,6 @@ config W1_SLAVE_DS2781
 
 config W1_SLAVE_DS28E04
 	tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
-	depends on W1
 	select CRC16
 	help
 	  If you enable this you will have the DS28E04-100
@@ -124,7 +120,6 @@ config W1_SLAVE_DS28E04
 
 config W1_SLAVE_BQ27000
 	tristate "BQ27000 slave support"
-	depends on W1
 	help
 	  Say Y here if you want to use a hdq
 	  bq27000 slave support.
-- 
1.8.3.2

Re: [PATCH] w1: Remove excess dependencies on W1 for masters and slaves

[Alexander Shiyan]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 474 bytes --]

Воскресенье, 16 февраля 2014, 16:25 +04:00 от Alexander Shiyan <shc_work@mail.ru>:
> Configuration for masters and slaves is included only if W1 symbol
> enabled, so no reason to check it once more.

Looks like this patch broke build drivers as modules.
Please forget it, sorry for noise.

---
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥