From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Lior Amsalem <alior@marvell.com>,
Tawfik Bayouk <tawfik@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: mvebu: add Device Tree for the Armada 385 RD board
Date: Thu, 6 Mar 2014 13:11:08 +0100 [thread overview]
Message-ID: <1394107868-26094-1-git-send-email-gregory.clement@free-electrons.com> (raw)
The Armada 385 RD board is the reference design board from Marvell
for the Armada 385 SoC. This commit adds a Device Tree description for
this board, which enables the following features:
* Network interfaces
* I2C bus
* Serial port
* SPI bus, with a SPI flash
* PCIe interface
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
Hi,
I have received this board only recently, so that why its device tree
comes only now. This patch should not cause any trouble to other part
of the kernel, so that's why I think it is reasonable to have it in
3.15.
Thanks,
Gregory
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/armada-385-rd.dts | 104 ++++++++++++++++++++++++++++++++++++
2 files changed, 106 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/armada-385-rd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f7d678808122..9155cf48e1b1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -153,7 +153,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb
+ armada-385-db.dtb \
+ armada-385-rd.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
new file mode 100644
index 000000000000..951bd91059e1
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -0,0 +1,104 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+ model = "Marvell Armada 385 Reference Design";
+ compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+
+ /*
+ * The Ethernet nodes are not ordered by
+ * address on purpose. Indeed the first
+ * Ethernet port of the board (Giga0) is
+ * located at 0x70000 whereas the the second
+ * Ethernet(Giga 1) port is located at
+ * 0x30000.
+ */
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ };
+
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
--
1.8.1.2
next reply other threads:[~2014-03-06 12:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 12:11 Gregory CLEMENT [this message]
2014-03-06 13:14 ` Andrew Lunn
2014-03-06 13:26 ` Gregory CLEMENT
2014-03-06 14:21 ` Andrew Lunn
2014-03-06 14:31 ` Gregory CLEMENT
2014-03-06 14:46 ` Andrew Lunn
2014-03-06 14:51 ` Gregory CLEMENT
2014-03-06 15:47 ` Gregory CLEMENT
2014-03-06 16:02 ` Ezequiel Garcia
2014-03-06 17:23 ` Andrew Lunn
2014-03-06 19:17 ` Ezequiel Garcia
2014-03-07 9:53 ` Gregory CLEMENT
2014-03-07 14:44 ` Jason Cooper
2014-03-07 21:42 ` One Thousand Gnomes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394107868-26094-1-git-send-email-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nadavh@marvell.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®