mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	rob@landley.net, sameo@linux.intel.com, lee.jones@linaro.org,
	lgirdwood@gmail.com, patches@opensource.wolfsonmicro.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/8] regulator: arizona-ldo1: Add processing of init_data from device tree
Date: Tue, 18 Mar 2014 10:49:13 +0000	[thread overview]
Message-ID: <1395139757-6907-5-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1395139757-6907-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt |    7 +++++
 drivers/regulator/arizona-ldo1.c                  |   26 +++++++++++++++++++++
 2 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 36a0c3d..d78f1aa 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ Optional properties:
     the chip default will be used.  If present exactly five values must
     be specified.
 
+  - wlf,ldo1 : Initial data for the LDO1 regulator, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt
+
+  - DCVDD-supply : Power supply, only needs to be specified if DCVDD is being
+    externally supplied. As covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt
+
 Example:
 
 codec: wm5102@1a {
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 6379fd3..a67013f 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
@@ -184,9 +185,34 @@ static const struct regulator_init_data arizona_ldo1_default = {
 static int arizona_ldo1_get_pdata(struct arizona *arizona,
 				  struct regulator_config *config)
 {
+	struct arizona_pdata *pdata = &arizona->pdata;
+	struct arizona_ldo1 *ldo1 = config->driver_data;
+	struct device_node *np_init, *np_dcvdd;
+
 	arizona_of_get_named_gpio(arizona, "wlf,ldoena", true,
 				  &config->ena_gpio);
 
+	np_init = of_get_child_by_name(arizona->dev->of_node, "wlf,ldo1");
+	np_dcvdd = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
+
+	if (np_init) {
+		config->of_node = np_init;
+
+		pdata->ldo1 = of_get_regulator_init_data(arizona->dev, np_init);
+
+		if (np_dcvdd) {
+			if (np_dcvdd != np_init)
+				arizona->external_dcvdd = true;
+		} else {
+			pdata->ldo1->consumer_supplies = &ldo1->supply;
+			pdata->ldo1->num_consumer_supplies = 1;
+		}
+
+		config->init_data = pdata->ldo1;
+	} else if (np_dcvdd) {
+		arizona->external_dcvdd = true;
+	}
+
 	return 0;
 }
 #else
-- 
1.7.2.5


  parent reply	other threads:[~2014-03-18 10:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-18 10:49 [PATCH 0/8] Arizona regulator updates Charles Keepax
2014-03-18 10:49 ` [PATCH 1/8] arizona: Correct small errors in the DT binding documentation Charles Keepax
2014-03-18 10:49 ` [PATCH 2/8] mfd: arizona: Factor out read of device tree GPIOs Charles Keepax
2014-03-18 10:49 ` [PATCH 3/8] regulator: arizona-ldo1: Move setup processing from arizona-core Charles Keepax
2014-03-18 11:10   ` Mark Brown
2014-03-18 14:11     ` Charles Keepax
2014-03-18 10:49 ` Charles Keepax [this message]
2014-03-18 11:15   ` [PATCH 4/8] regulator: arizona-ldo1: Add processing of init_data from device tree Mark Brown
2014-03-18 16:07     ` Charles Keepax
2014-03-18 16:19       ` Mark Brown
2014-03-18 10:49 ` [PATCH 5/8] regulator: arizona-micsupp: " Charles Keepax
2014-03-18 10:49 ` [PATCH 6/8] mfd: arizona: Add MICVDD to mapped regulators Charles Keepax
2014-03-18 10:49 ` [PATCH 7/8] mfd: wm8997: Add registers for high power mode Charles Keepax
2014-03-18 10:49 ` [PATCH 8/8] regulator: arizona-ldo1: Correct default regulator init_data Charles Keepax
2014-03-18 11:21   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395139757-6907-5-git-send-email-ckeepax@opensource.wolfsonmicro.com \
    --to=ckeepax@opensource.wolfsonmicro.com \
    --cc=broonie@kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=pawel.moll@arm.com \
    --cc=rob@landley.net \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome