From: Tanmay Inamdar <tinamdar@apm.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Arnd Bergmann <arnd@arndb.de>,
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Rob Landley <rob@landley.net>, Liviu Dudau <liviu.dudau@arm.com>
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, patches@apm.com, jcm@redhat.com,
Tanmay Inamdar <tinamdar@apm.com>
Subject: [PATCH v5 0/4] APM X-Gene PCIe controller
Date: Wed, 19 Mar 2014 16:12:38 -0700 [thread overview]
Message-ID: <1395270762-6055-1-git-send-email-tinamdar@apm.com> (raw)
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.
X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
1. https://lkml.org/lkml/2014/3/14/320
2. https://lkml.org/lkml/2014/3/14/279
If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set.
changes since V4:
1. fix section mismatch warnings
2. fix the patch description
3. fix indentation
4. update read/write cfg functions by passing both addr and offset.
5. use 'time_before' for timeout.
6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
7. remove BUG_ON for pci_ioremap_io.
changes since V3:
1. remove 'struct hw_pci' and supporting ops in hw_pci
2. add code to create the host bridge from dts
3. add code to scan the the host bridge
4. modify outbound windows setup function to get resource information from
'bridge->windows'
5. add compatible string in pcie dts node with current X-Gene SOC name.
changes since V2:
1. redefined each PCI port in different PCI domain correctly.
2. removed setup_lane and setup_link functions from driver.
3. removed scan_bus wrapper and set_primary_bus hack.
4. added pci_ioremap_io for io resources.
changes since V1:
1. added PCI domain support
2. reading cpu and pci addresses from device tree to configure regions.
3. got rid of unnecessary wrappers for readl and writel.
4. got rid of endpoint configuration code.
5. added 'dma-ranges' property support to read inbound region configuration.
6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
7. dropped 'clock-names' property from bindings
8. added comments whereever requested.
Tanmay Inamdar (4):
pci: APM X-Gene PCIe controller driver
arm64: dts: APM X-Gene PCIe device tree nodes
dt-bindings: pci: xgene pcie device tree bindings
MAINTAINERS: entry for APM X-Gene PCIe host driver
.../devicetree/bindings/pci/xgene-pci.txt | 52 ++
MAINTAINERS | 7 +
arch/arm64/boot/dts/apm-mustang.dts | 8 +
arch/arm64/boot/dts/apm-storm.dtsi | 155 +++++
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-xgene.c | 725 ++++++++++++++++++++
7 files changed, 958 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
create mode 100644 drivers/pci/host/pci-xgene.c
--
1.7.9.5
next reply other threads:[~2014-03-19 23:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-19 23:12 Tanmay Inamdar [this message]
2014-03-19 23:12 ` [PATCH v5 1/4] pci: APM X-Gene PCIe controller driver Tanmay Inamdar
2014-03-21 10:15 ` Sunil Kovvuri
2014-03-21 18:23 ` Tanmay Inamdar
2014-03-25 14:05 ` Liviu Dudau
2014-03-25 19:56 ` Bjorn Helgaas
2014-03-25 8:52 ` Phil.Edworthy
2014-03-25 21:52 ` Tanmay Inamdar
2014-03-25 14:02 ` Liviu Dudau
2014-03-25 22:12 ` Tanmay Inamdar
2014-03-26 10:13 ` Liviu Dudau
2014-03-19 23:12 ` [PATCH v5 2/4] arm64: dts: APM X-Gene PCIe device tree nodes Tanmay Inamdar
2014-03-26 14:28 ` Rob Herring
2014-03-26 15:35 ` Liviu Dudau
2014-03-26 16:35 ` Jason Gunthorpe
2014-04-16 17:05 ` Liviu Dudau
2014-04-16 21:21 ` Jason Gunthorpe
2014-04-17 0:20 ` Liviu Dudau
2014-04-17 1:24 ` Jason Gunthorpe
2014-04-22 12:49 ` Liviu Dudau
2014-03-19 23:12 ` [PATCH v5 3/4] dt-bindings: pci: xgene pcie device tree bindings Tanmay Inamdar
2014-03-19 23:12 ` [PATCH v5 4/4] MAINTAINERS: entry for APM X-Gene PCIe host driver Tanmay Inamdar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395270762-6055-1-git-send-email-tinamdar@apm.com \
--to=tinamdar@apm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=jcm@redhat.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liviu.dudau@arm.com \
--cc=patches@apm.com \
--cc=rob@landley.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®