mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: Alan Tull <atull@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dinh Nguyen <dinguyen@altera.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	devicetree@vger.kernel.org
Subject: [PATCH 3/3] ARM: dts: socfpga: add gpio pieces
Date: Thu, 20 Mar 2014 20:55:24 +0100	[thread overview]
Message-ID: <1395345324-18299-4-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1395345324-18299-1-git-send-email-bigeasy@linutronix.de>

The cycloneV has three gpio controllers, each one with 29 gpios. This patch
adds the three controller with the gpio driver which is now sitting the
gpio tree.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/arm/boot/dts/socfpga.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 537f1a5..c3a97e1 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -463,6 +463,66 @@
 			status = "disabled";
 		};
 
+		gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio0: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <1>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio1: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <1>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio2: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <1>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
 		L2: l2-cache@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
-- 
1.9.1


  parent reply	other threads:[~2014-03-20 19:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-20 19:55 two patches for the synposys gpio controller Sebastian Andrzej Siewior
2014-03-20 19:55 ` [PATCH 1/3] gpio: dwapb: drop irq_setup_generic_chip() Sebastian Andrzej Siewior
2014-03-25 20:37   ` Linus Walleij
2014-03-25 20:37     ` Linus Walleij
2014-03-31 16:22       ` Jamie Iles
2014-03-20 19:55 ` [PATCH 2/3] gpio: dwapb: do not create the irq mapping upfront Sebastian Andrzej Siewior
2014-03-20 20:20   ` delicious quinoa
2014-03-22 12:37     ` Sebastian Andrzej Siewior
2014-03-25 20:43       ` Linus Walleij
2014-03-25 21:17         ` Sebastian Andrzej Siewior
2014-04-08 13:20           ` Linus Walleij
2014-03-20 19:55 ` Sebastian Andrzej Siewior [this message]
2014-03-21 17:24   ` [PATCH 3/3] ARM: dts: socfpga: add gpio pieces Gerhard Sittig
2014-03-21 19:10     ` Sebastian Andrzej Siewior
2014-03-21 22:06       ` delicious quinoa
2014-03-21 18:14   ` delicious quinoa
2014-03-21 19:08     ` Sebastian Andrzej Siewior
2014-03-21 22:15     ` delicious quinoa
2014-03-22 11:28       ` Sebastian Andrzej Siewior
2014-03-26 15:29         ` Dinh Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395345324-18299-4-git-send-email-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=atull@altera.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@altera.com \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®